This mid-century modern walnut-finish armless dining side chair, model DSC-MCM-WAL-BLK-001, is an unbranded dining side chair defined by clean, timeless silhouette cues. Its visual form features splayed, tapered legs set beneath a streamlined armless frame, with a slender solid wood vertical back support post connecting the gently contoured backrest to the rear seat rail. A cross-stretcher between legs adds subtle structural visual balance, while the warm walnut stain paired with a matte black upholstered seat creates a versatile, understated aesthetic that complements a wide range of interior palettes. Overall dimensions measure 584 x 584 x 826 mm, with a 502 mm seat height, 483 mm seat width, 457 mm seat depth, 533 mm wide backrest at its widest point, and 324 mm backrest height above the seat, creating a compact, proportional profile. The chair is built with a walnut-stained solid rubberwood frame finished with clear satin lacquer, joined via durable mortise and tenon joints reinforced with metal screws at seat-to-leg connections. The 102 mm thick seat cushion uses 45 kg/m³ high-resilience polyurethane foam with 60% rebound rate, wrapped in 20 gsm Dacron batting, and upholstered in 0.8 mm thick black polyurethane faux leather rated for 50000 Martindale abrasion cycles. Adjustable, non-marking black polyethylene anti-scratch foot pads sit at the base of each 20 mm diameter tapered leg, designed to protect flooring and compensate for uneven surfaces up to 5 mm in height difference. The frame carries a 200 kg static load rating, with a 150 kg recommended static load capacity for the seat, and the chair weighs 15.4 kg net per unit. Functionally, the chair offers fixed, stationary seating suited for short-duration dining use, with no tilt or swivel mechanisms. Its armless profile allows full tucking under standard 750 mm height dining tables, and the smooth faux leather surface supports simple wipe-down cleaning with mild detergent. The chair is not stackable. It is well suited for residential dining rooms, where its narrow profile preserves valuable circulation space around the table, as well as compact kitchen dinette areas and small breakfast nooks where floor space is limited. For procurement, note that each chair ships across 2 cartons, with a packaged gross weight of 23 kg per set, total carton volume of 0.26 m³ per set, and assembly time of 40 minutes per unit. At 85% space utilization, a 20GP shipping container holds 135 sets, supporting consistent bulk order planning for both residential furnishing projects and small-scale hospitality outfitting needs.