Modern Low-Profile Rectangular Matte Taupe Coffee Table with Open Recessed Hollow Base

Submitted	Field	Original	修改后参数	Note / Status
No corrections yet. Use the flag at the end of a row to report an issue.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Overall dimensions	1300 x 700 x 380 mm
Tabletop thickness	50 mm
Side panel wall thickness	30 mm
Open recessed cavity dimensions	1220 x 620 x 280 mm
Floor to cavity bottom clearance	50 mm
Top overhang around base	10 mm
Corner radius	2 mm
Open cavity front opening height	280 mm
Floor contact base footprint	1240 x 640 mm
Finished Top Thickness	Approx. 25-45 mm
Effective Knee Clearance	Approx. 620-680 mm high and 700-900 mm wide per main seat
Leg / Support Section	Approx. 40-80 mm main section with 1.2-2.0 mm metal wall
Cable Opening Size	Approx. 60-80 mm diameter; cable tray depth approx. 80-120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Net weight range	32-48 kg
Tabletop distributed static load capacity	50 kg
Recommended user capacity	Suitable for 3-5 seating positions
Surface heat resistance (short term)	80°C
Surface abrasion resistance reference	2000 cycles
Floor load distribution	Evenly distributed across full base perimeter
Stability tilt resistance	Withstands 15° lateral tilt without tipping when loaded to rated 50kg distributed capacity
Top Static Load Reference	Approx. 80-150 kg uniformly distributed
Drawer Slide Load / Life	Approx. 25-45 kg/pair; 30,000-50,000 cycles
Hinge Opening Life	Acceptance target 40,000-80,000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test
Recommended Procurement Warranty	Structure 3-5 years; hardware 2-3 years; finish 1-2 years

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Tabletop substrate	18mm MDF core
Side/base panel substrate	15mm MDF or particleboard
Exterior finish	Matte polyurethane lacquer, light taupe/grey color
Interior cavity finish	Matching matte taupe lacquer
Bottom edge floor contact	4mm thick non-slip EVA glide pads
Panel joint construction	Mitered corner joints with adhesive and dowel reinforcement
Coating thickness	0.15-0.2mm per coat, 3-coat application
Edge treatment	Squared polished lacquered edges, no separate edge banding
Cavity interior shelf base	12mm MDF panel fixed to side panels 50mm above floor level
Primary Panel Thickness	Approx. 18-25 mm; load-bearing top may use 25-40 mm composite build-up
Edge Band Thickness	Approx. 1.0-2.0 mm
Metal Frame Wall Thickness	Approx. 1.2-2.0 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support
Reference Finish / Color Count	Recommended 3-6 top finishes and 1-3 frame colors

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Storage configuration	Fixed open front recessed cavity, no drawers, doors, or adjustable shelves
Mobility	Static non-caster design, requires lifting for repositioning
Surface use case	Flat level top for placing beverages, books, decorative objects, and small table lamps
Assembly requirement	Knock-down or fully assembled delivery option
Adjustable features	No height adjustment, extension, or tilt mechanisms
Cable management	No integrated cable ports or routing
Floor protection function	EVA glide pads raise base 1mm above floor surface to prevent scuffing on hardwood, tile, and low-pile carpet floors, no sharp exposed substrate edges at floor contact points
Cable Management Capacity	Reference capacity 6-10 power/data cables; tray load approx. 5-10 kg
Reference Reassembly Count	Main joints should support 3-5 controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Carton count	1 unit per carton
Carton dimensions	Approx. 1400 x 800 x 480 mm
Gross weight per carton	Approx. 40-56 kg
CBM per unit	Approx. 0.54 CBM
Assembly time for flat-pack variant	15-20 minutes for 1 person with included hardware
Loading quantity (40ft HQ container)	Approx. 120 units
Reference Package Count	1 set / 1-2 cartons
Reference Assembly Time	Approx. 15-40 minutes per set
Reference Package Dimensions	Approx. 1300-2100 × 800-1100 × 150-300 mm
Reference Packaged Gross Weight	Approx. 35-90 kg/set in 1-2 cartons

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Residential living room use	Positioned centered in front of 3-seat sofas or sofa+armchair seating clusters, at ergonomic height for reaching items while seated
Luxury minimalist/modern Italian style interiors	Matches matte taupe finish, clean block form, and no decorative hardware for high-end residential or show home settings
Lounge and reception waiting areas	Suitable for low-traffic corporate reception or executive lounge spaces paired with upholstered leather seating
Recommended pairings	Pairs with low-profile leather or fabric upholstery sofas with 40-45cm seat height, maintaining 20-25mm ergonomic height difference between seat and tabletop
Surface use restrictions	Not suitable for cutting, hot cookware directly placed on surface, or heavy loads over 50kg
Corporate executive lounge reception areas	Suitable for low-traffic executive lounge or VIP reception spaces paired with upholstered leather seating, rated for light commercial use with 50kg load capacity
Open storage use cases	Recessed cavity suitable for storing coffee table books, throw blankets, remote controls, or small decorative baskets, with full front access for easy retrieval

STANDARD S1

EU EN Standards

European market access and chemical requirements

EN 15372:2016 Furniture - Strength, durability and safety - Requirements for non-domestic tables	Applicable if specified for contract/hospitality use, covering static load and stability requirements
EN 12521:2015 Furniture - Strength, durability and safety - Requirements for domestic tables	Applies to residential use stability and structural performance for coffee tables

STANDARD S2

North America ANSI/BIFMA Standards

US and Canada office-furniture standards

No standards data is available for this market.

STANDARD S3

China GB Standards

Standards applicable to China-market projects

GB/T 3324-2017 General technical requirements for wooden furniture	Applies to dimensional tolerance, surface coating quality, and structural strength requirements for wooden residential coffee tables
GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture	Applicable standards and test results require confirmation
GB/T 4893.4-2013 Test of surface coatings of furniture - Part 4: Determination of adhesion	Applicable for verifying lacquer coating adhesion to MDF substrates
GB/T 4893.8-2013 Test of surface coatings of furniture - Part 8: Determination of abrasion resistance	Applicable for measuring surface wear performance of the matte lacquer top

Standard Tender Description

This product must meet the following technical requirements:
1. GB/T 3324-2017 General technical requirements for wooden furniture: Applies to dimensional tolerance, surface coating quality, and structural strength requirements for wooden residential coffee tables;
2. GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture: Applicable standards and test results require confirmation;
3. GB/T 4893.4-2013 Test of surface coatings of furniture - Part 4: Determination of adhesion: Applicable for verifying lacquer coating adhesion to MDF substrates;
4. GB/T 4893.8-2013 Test of surface coatings of furniture - Part 8: Determination of abrasion resistance: Applicable for measuring surface wear performance of the matte lacquer top;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · CT-RECT-MATTE-OPEN-1300

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · CT-RECT-MATTE-OPEN-1300

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · CT-RECT-MATTE-OPEN-1300Open Export Tool

Quick Actions

Post Inquiry

FurnDim

CT-RECT-MATTE-OPEN-1300