Teal Fabric 3-Piece Lounge Seating Set (model LS-TEAL-3SEAT-2ARM-CHR) is listed under Faux Leather Sofa, with overall dimensions of 2250 × 930 × 860 mm and main material of artificial leather. Load capacity: Acceptance target ≥120 kg; chair reference load 150 kg. Certifications: Minimalist,cubic,silhouette,upholstered,residential,lounge,seating,fixed,non-modular,structure. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| 3-seat sofa overall dimensions | 2250 x 930 x 860 mm | |
|---|---|---|
| Single armchair overall dimensions | 1000 x 930 x 860 mm | |
| Seat height from floor | 490 mm | |
| Seat cushion thickness | 170 mm | |
| Seat depth (usable sitting surface) | 590 mm | |
| Backrest height above seat | 370 mm | |
| Armrest height from floor | 770 mm | |
| Armrest width (per side) | 120 mm | |
| Under-seat clearance | 150 mm | |
| Leg diameter (cylindrical chrome) | 30 mm | |
| Seat width per 3-seat position | 600 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Total set net weight | 123 kg | |
|---|---|---|
| Weight capacity per seating position | 135 kg | |
| Total 3-seat sofa weight capacity | 405 kg | |
| Seat foam density | 30 kg/m³ | |
| Cushion recovery time after unpacking | 72 hours | |
| Seam stitch pitch | 8 stitches per inch | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles | |
| Five-star Base Static Load Reference | Acceptance target ≥120 kg; chair reference load 150 kg |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Upholstery fabric | 100% woven teal polyester, abrasion resistance 30000 cycles, matte finish | |
|---|---|---|
| Internal frame | Engineered eucalyptus hardwood frame, 30mm thick structural members | |
| Seat support | Sinuous spring suspension under cushions for even weight distribution | |
| Cushion filling | High-density polyurethane foam with 10mm polyester fiber wrap for soft feel | |
| Legs | Polished chrome-plated cylindrical steel legs, 1.2mm wall thickness | |
| Frame connectors | Zinc-plated steel hardware for leg attachment and frame joint reinforcement |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Stationary fixed design | No recline, sleeper or adjustable mechanisms for stable residential use | |
|---|---|---|
| Knock-down assembly | Only leg attachment required with included hardware, no special tools needed | |
| Fixed cushion placement | Seat cushions are positioned on support base without removable zippered covers per visible tight upholstery | |
| Floor protection | Each leg is fitted with a non-marking plastic foot pad to prevent floor scratches |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential living room | Conversational layout suitable for open-plan modern living spaces, seating 5 people total | |
|---|---|---|
| Lounge reception area | Appropriate for small office waiting zones or hospitality break areas with low formal traffic |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Furniture strength, durability and safety for domestic seating, applicable for residential lounge use | |
|---|---|---|
| EN 1021-1:2014 | Upholstered furniture flammability, cigarette ignition resistance standard for fabric cushions |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2022 | Lounge seating standard for commercial use if specified for non-residential applications | |
|---|---|---|
| ANSI/BIFMA X5.41-2020 | Emissions standard for VOC and formaldehyde from upholstered furniture components |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to internal frame strength and finish quality | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances for wooden furniture, formaldehyde emission limit for engineered wood components | |
| GB/T 19833-2023 | Furniture sofas, test methods and performance requirements for strength and durability |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to internal frame strength and finish quality; 2. GB 18584-2001: Limit of harmful substances for wooden furniture, formaldehyde emission limit for engineered wood components; 3. GB/T 19833-2023: Furniture sofas, test methods and performance requirements for strength and durability; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp