| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 940 x 562 x 400 mm | |
|---|---|---|
| Tabletop thickness | 20 mm | |
| Pedestal base width | 700 mm | |
| Pedestal base depth | 420 mm | |
| Pedestal base height | 380 mm | |
| Vertical metal inlay length | 120 mm | |
| Floor clearance under table edge | 20 mm | |
| Tabletop overhang front/back | 71 mm | |
| Tabletop overhang left/right | 120 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Product net weight | 32 kg | |
|---|---|---|
| Distributed static tabletop load | 100 kg | |
| Base plinth static floor load rating | 500 kg total | |
| Surface water resistance | Suitable for cold beverage placement without damage | |
| Scratch resistance rating (surface) | Suitable for regular daily use with standard coasters | |
| Recommended seating capacity for adjacent use | 4 people | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop panel | Sealed natural or engineered stone with polished matte finish | |
|---|---|---|
| Pedestal frame | 1.5 mm thick cold-rolled steel with matte dark powder coat | |
| Vertical decorative inlays | Brushed metal trim finished in matching dark tone | |
| Internal support structure | Steel cross bracing connecting top to base pedestal | |
| Plinth foot pads | Non-marking injection-molded polymer pads | |
| Tabletop edge treatment | Straight squared polished edge with eased corners | |
| Metal finish coating thickness | 80 micron powder coat | |
| Fastener hardware | Zinc-plated steel M8 connecting bolts | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
Adjustment / rotation / tilt / mobility / storage features
| Assembly requirement | Partial assembly requiring attachment of tabletop to pre-built base | |
|---|---|---|
| Surface functionality | Flat fixed top designed for holding drinks, reading materials, and decor items | |
| Floor protection | Integrated non-scuff feet prevent scratching of hard flooring surfaces | |
| Structural stability | Central weighted pedestal base eliminates leg obstruction for seating access | |
| Surface cleaning | Non-porous sealed top supports wipe-clean maintenance with mild household cleaners | |
| Positioning flexibility | Low profile suitable for placement centered in lounge seating groups | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Residential living room use | Centered between sofa and armchairs as lounge center table | |
|---|---|---|
| Commercial office lounge use | Placed in reception or breakout areas for guest beverage placement | |
| Hotel lobby lounge use | Used in soft seating groupings for guest amenity placement | |
| Recommended floor surfaces | Suitable for tile, polished concrete, low-pile carpet, and hardwood floors | |
| Recommended user groups | Suited for homeowners, commercial specifiers, and hospitality procurement teams | |
| Coordinating furniture recommendation | Pairs with low-profile leather upholstered lounge seating as shown in display |
EU Market Access Requirements* EN Standards
| Domestic table safety requirements | EN 12521:2015 | |
|---|---|---|
| Furniture surface resistance to cold liquids | EN 12720:2013 |
Standards applicable to China-market projects
| Table structural stability | GB/T 3324 | |
|---|---|---|
| Stone panel radioactivity | GB 6566Class A | |
| Metal furniture coating adhesion | GB/T 1979 |
This product must meet the following technical requirements: 1. Table structural stability: GB/T 3324; 2. Stone panel radioactivity: GB 6566Class A; 3. Metal furniture coating adhesion: GB/T 1979; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
