| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall set footprint (U-shaped layout) | 3800 x 2300 x 900 mm | |
|---|---|---|
| Single armchair dimensions | 1050 x 900 x 900 mm | |
| Three-seat sofa dimensions | 2050 x 900 x 900 mm | |
| Integrated tea table dimensions | 1300 x 700 x 450 mm | |
| Seat height (seating units) | 420 mm | |
| Seat depth (seating units) | 580 mm | |
| Backrest height (seating units) | 480 mm | |
| Armrest height (seating units) | 620 mm | |
| Sintered stone tea table top thickness | 12 mm | |
| Tea table drawer internal dimensions | 500 x 350 x 100 mm | |
| Tea table lower shelf clearance | 300 mm | |
| Metal leg wall thickness (seating and table) | 1.2 mm | |
| Seating leg angle (outward splay) | 15 degrees | |
| Side end table (adjacent to left armchair) dimensions | 500 x 500 x 550 mm | |
| Seat cushion thickness (seating units) | 120 mm | |
| Backrest padding thickness (seating units) | 80 mm | |
| Armrest pad thickness (seating units) | 60 mm | |
| Tea table lower slat shelf clearance | 390 mm |
Net weight / load capacity / users / durability
| Total set net weight range | 260 kg | |
|---|---|---|
| Single seating position static load capacity | 150 kg | |
| Upholstery abrasion resistance | ≥20000 Martindale cycles | |
| Seat foam density | 25 kg/m³ | |
| Back/armrest foam density | 20 kg/m³ | |
| Foam rebound rate | ≥45% | |
| Foam 75% compression set | ≤10% | |
| Sintered stone surface properties | MOHS hardness 6, heat resistance 180°C, stain-proof non-porous surface | |
| Sintered stone surface performance | MOHS hardness 6, heat resistance ≥180°C, non-porous stain-proof surface | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles | |
| Five-star Base Static Load Reference | Acceptance target ≥120 kg; chair reference load 150 kg | |
| Caster Rolling Durability Reference | Acceptance target 30000 cycles | |
| Gas-lift Cycling Reference | Acceptance target 100000 cycles | |
| Upholstery Seam Pitch | 4 mm |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat/back/armrest upholstery | 1.5mm thick two-tone taupe + dark brown PU faux leather (xi pi) with scratch-resistant matte finish | |
|---|---|---|
| Seat cushion core | High-resilience polyurethane foam with optional latex upgrade layer, supported by S-shaped sinuous springs | |
| Back/armrest padding | 20kg/m³ soft polyurethane foam, fixed upholstered over internal frame | |
| Internal seating frame | Kiln-dried solid hardwood + metal reinforcement, moisture content ≤12%, anti-corrosion treated | |
| Seating and table support legs | 1.2mm thick black powder-coated carbon steel, angled splay design, with non-slip rubber floor pads | |
| Tea table top | White sintered stone with gold veining, polished surface, rounded edge treatment | |
| Tea table frame | 1.2mm thick black powder-coated square steel tube open frame, matching seating leg finish | |
| Tea table central drawer | Wood-grain melamine-faced MDF drawer front with silver metal pull handle, mounted on 3-section ball-bearing slides | |
| Tea table lower shelf | Black powder-coated metal slat rack, open design for water jug storage and ventilation | |
| Seating stitching details | 8stitches per inch (3mm stitch pitch) matching-thread seam construction, tufted panel detailing on seat backs | |
| Adhesives and finishes | Low-VOC water-based adhesive and paint, formaldehyde emission ≤1.5mg/L | |
| Integrated tea boiler unit | Stainless steel electric induction water boiler with automatic water feed, 1200W heating power | |
| Back/armrest padding core | ≥20kg/m³ soft polyurethane foam, fixed upholstered over internal frame with stitched panel tufting | |
| Tea table support frame | 1.2mm thick black powder-coated square steel tube open frame, matching seating leg finish, welded corner joints | |
| Tea table lower storage shelf | 8mm diameter black powder-coated steel slat rack, 20mm slat spacing, open design for water jug storage and ventilation | |
| Integrated tea boiler cutout and components | Embedded stainless steel electric induction water boiler (1200W heating power) with automatic water feed connection, removable stainless steel drain tray for tea waste | |
| Seating stitching construction | 8stitches per inch (3mm stitch pitch) matching-thread seam construction, recessed panel detailing on seat backs and cushions | |
| Adhesives and interior finishes | Low-VOC water-based adhesive and coating, formaldehyde emission ≤1.5mg/L |
Adjustment / rotation / tilt / mobility / storage features
| Fixed reception seating design | No recline, swivel, or height adjustment; fixed-angle backrests optimized for upright short-term guest seating (60 minute waits) | |
|---|---|---|
| Integrated kung-fu tea service system | Embedded 1200W electric boiler with automatic water feed from lower 18.9L jug, integrated drain tray for tea waste, supports boiling and (heat retention) for tea preparation | |
| Central tea table storage drawer | Single soft-close drawer on 3-section ball-bearing slides, provides enclosed storage for tea utensils, coasters, and small reception supplies | |
| Open lower water jug storage | Slatted metal lower shelf with 300mm clearance, holds standard 18.9L/5-gallon water jug with concealed water line routing to the boiler, no door obstruction for easy jug replacement | |
| Stable angled leg support | Outward-splayed 15-degree metal legs with non-slip rubber pads, distribute weight evenly to prevent wobble on hard office tile floors, reduce floor scratching | |
| Stain-resistant easy-clean surfaces | Matte PU upholstery and non-porous sintered stone top can be wiped clean with a damp cloth to remove tea spills, dust, and common office stains; no special cleaning products required | |
| Modular set configuration | Set includes 2 single armchairs, 1 three-seat sofa, and 1 integrated tea table, arranged in U-shape for face-to-face guest conversations; units can be repositioned to fit different reception room layouts | |
| Floor protection features | All legs have 5mm thick non-marking rubber foot pads, prevent scuffing and scratching on polished tile, marble, or wood office floors | |
| Fixed reception seating geometry | No recline, swivel, or height adjustment; fixed 105-degree backrest angle optimized for upright short-term guest seating (60 minute waits) | |
| Central tea table enclosed storage | Single soft-close drawer on 3-section full-extension ball-bearing slides, provides 17.5L enclosed storage for tea utensils, coasters, and small reception supplies | |
| Stable angled leg support system | Outward-splayed 15-degree metal legs with 5mm non-slip rubber pads, distribute weight evenly to prevent wobble on hard office tile floors, point load <0.5MPa to avoid floor indentation | |
| Modular reconfigurable layout | Set includes 2 single armchairs, 1 three-seat sofa, and 1 integrated tea table, plus 1 matching slatted side end table; units are freestanding and can be repositioned to fit linear, L-shaped, or U-shaped reception layouts as needed | |
| Floor protection design | All legs have 5mm thick non-marking nitrile rubber foot pads, prevent scuffing and scratching on polished tile, marble, or wood office floors under normal movement | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions |
Verified carton / gross weight / assembly / loading data
| Carton count (engineering ) | 7 total cartons: 2 for single armchairs, 1 for three-seat sofa, 2 for tea table (1 for top/frame, 1 for hardware/boiler), 1 for side end table, 1 for accessories/hardware | |
|---|---|---|
| Individual carton dimension range (engineering ) | Largest carton (three-seat sofa): 2100×950×650mm; single armchair cartons: 1100×950×650mm each; tea table frame carton: 1350×750×200mm; sintered stone top carton: 1350×750×80mm | |
| Total gross weight range (engineering ) | 290 kg | |
| Total shipping volume (engineering ) | 2.2 cbm | |
| On-site assembly time (engineering ) | 2-person assembly in 90 minutes, requires standard Phillips screwdriver and Allen key (included in hardware pack) | |
| 20ft GP container loading quantity (engineering ) | 22complete sets | |
| 40ft HQ container loading quantity (engineering ) | 48complete sets | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm |
Recommended spaces / users / usage modes
| Office reception/waiting areas | Ideal for corporate lobbies, executive floor waiting zones, and department reception rooms, provides professional seating for 5 guests during meetings or visitor waits | |
|---|---|---|
| Small business meeting spaces | Suitable for 5person informal discussions and tea-based client meetings, with integrated tea service eliminating the need for separate serving carts | |
| Executive office private lounge zones | Can be placed in executive office corners for casual guest conversations and tea breaks, matching modern commercial decor styles | |
| Shared office breakout areas | Appropriate for co-working space relaxation zones and staff break areas, with easy-clean surfaces suited for shared high-traffic use | |
| Recommended layout clearance | Leave ≥600mm walking clearance around the U-shaped set to allow easy guest movement and water jug replacement; requires minimum 15sqm floor area for comfortable placement | |
| Warranty reference | 3 year warranty for structural frames, 1 year warranty for upholstery/foam components, 12 month warranty for electric tea boiler components per standard commercial furniture terms | |
| Available color options reference | Available in standard two-tone taupe/dark brown (pictured), solid black, solid brown, and custom two-tone grey combinations, with white/grey sintered stone top options for tea table | |
| Corporate office reception/waiting areas | Ideal for company lobbies, executive floor waiting zones, and department reception rooms, provides professional seating for 5 guests during visitor check-in, pre-meeting waits, or short courtesy calls | |
| Client meeting spaces with tea service | Suitable for 5person informal discussions and tea-based client meetings common in East Asian business contexts, with integrated tea service eliminating the need for separate serving carts or portable boilers | |
| Shared office breakout and relaxation areas | Appropriate for co-working space relaxation zones and staff break areas, with stain-resistant easy-clean surfaces and durable commercial grade materials suited for high-traffic shared use |
EU Market Access Requirements* EN Standards
| EN 13759:2008 Furniture - Seating - Test methods for the determination of strength and durability | Applicable to seating unit structural testing, requires 50000 cycle seat load test without failure | |
|---|---|---|
| EN 15372:2016 Furniture - Strength, durability and safety - Requirements for non-domestic tables | Applicable to tea table structural performance, requires vertical and horizontal load testing for commercial use | |
| EN 1022:2018 Furniture - Seating - Determination of stability | Applicable to seating units, requires resistance to tipping when users lean to sides or front | |
| EN 12520:2015 Furniture - Seating - Mechanical safety requirements for non-domestic seating | Applicable to all seating components, requires no sharp edges, entrapment hazards, or structural failure points |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2021 Lounge and Public Seating | Applicable to reception seating performance, defines static load, impact, and cyclic durability requirements for public area seating | |
|---|---|---|
| ANSI/BIFMA X5.5-2021 Desk Products (Occasional Table Addendum) | Applicable to tea table structural performance, defines 113kg vertical top load, 22.7kg drawer load, and 10000 cycle sliding durability requirements for commercial occasional tables |
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for wooden furniture | Applicable to wooden frame and drawer components, requires structural stability, edge finishing, and moisture content compliance | |
|---|---|---|
| GB/T 3325-2017 General technical requirements for metal furniture | Applicable to steel frame and leg components, requires wall thickness tolerance, welding quality, and coating adhesion compliance | |
| GB 18580-2017 Indoor decorating and refurbishing materials - Limit of formaldehyde emission from wood-based panels | Applicable to MDF drawer components, requires E1 grade formaldehyde emission ≤0.124mg/m³ | |
| GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of upholstered furniture | Applicable to upholstery, foam, and adhesive components, limits formaldehyde and soluble heavy metal content | |
| GB/T 19001-2016 Quality management systems - Requirements | Recommended for supplier production process quality control, ensures consistent product quality across batches | |
| GB/T 35607-2017 Green product evaluation - Furniture | Recommended for environmental performance verification, requires low VOC emissions and recycled material content for commercial furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for wooden furniture: Applicable to wooden frame and drawer components, requires structural stability, edge finishing, and moisture content compliance; 2. GB/T 3325-2017 General technical requirements for metal furniture: Applicable to steel frame and leg components, requires wall thickness tolerance, welding quality, and coating adhesion compliance; 3. GB 18580-2017 Indoor decorating and refurbishing materials - Limit of formaldehyde emission from wood-based panels: Applicable to MDF drawer components, requires E1 grade formaldehyde emission ≤0.124mg/m³; 4. GB 18584-2001 Indoor decorating and refurbishing materials - Limit of harmful substances of upholstered furniture: Applicable to upholstery, foam, and adhesive components, limits formaldehyde and soluble heavy metal content; 5. GB/T 19001-2016 Quality management systems - Requirements: Recommended for supplier production process quality control, ensures consistent product quality across batches; 6. GB/T 35607-2017 Green product evaluation - Furniture: Recommended for environmental performance verification, requires low VOC emissions and recycled material content for commercial furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
