Product supplierRectangular Wood-Top Metal-Frame Coffee Table with Open Lower Shelf, E0-grade particleboard core
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1200 × 600 × 480 mm | |
|---|---|---|
| tabletop thickness | 19 mm | |
| leg cross-section | 40 x 20 mm rectangular steel tube | |
| lower shelf clearance above floor | 120 mm | |
| clearance between top and lower shelf | 280 mm | |
| tabletop edge radius | 15 mm | |
| lower shelf panel thickness | 16 mm | |
| leg wall thickness | 1.2 mm | |
| floor clearance under lower shelf | 60 mm | |
| lower shelf usable width | 1080 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| net product weight | 24 kg | |
|---|---|---|
| tabletop static distributed load capacity | 113 kg | |
| frame finish scratch resistance | 2000 cycles | |
| laminate surface abrasion resistance | 300 revolutions | |
| product service life (commercial use) | 5 years | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| tabletop substrate | E0-grade particleboard core | |
|---|---|---|
| tabletop finish | Walnut wood-grain high-pressure laminate with PVC edge banding | |
| support frame and legs | Powder-coated matte silver steel tubing | |
| lower shelf panel | Matching wood-grain laminate over particleboard | |
| foot pads | Felt-lined non-slip plastic glides | |
| connecting hardware | Zinc-plated steel bolt and cam lock connectors | |
| frame surface treatment | Electrostatic powder coating | |
| edge banding thickness | 1 mm | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| tabletop surface function | Flat stable surface for beverage service, decorative items and reading materials | |
|---|---|---|
| lower open shelf function | Open storage for magazines, brochures and small reception accessories | |
| floor protection function | Felt glides on all four leg bases | |
| structural stability design | Dual horizontal crossbars connect left and right leg assemblies | |
| assembly requirement | Knockdown assembly with included hex key hardware | |
| surface maintenance | Stain-resistant laminate surface wipes clean with damp cloth | |
| leveling adjustment | Fixed-height glides maintain even placement on level commercial flooring | |
| Cable / Vent Opening Reference | If fitted, 80 mm diameter |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| shipping carton dimensions | 1150 x 650 x 130 mm | |
|---|---|---|
| shipping gross weight | 27 kg | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| office reception lounge | Centered between guest seating for beverage service and visitor brochure placement | |
|---|---|---|
| corporate executive lounge | Complements leather lounge seating for informal meeting and break use | |
| high-end residential living room | Pairs with upholstered sofas and armchairs for everyday living area use | |
| hotel lobby waiting area | Durable construction withstands high-traffic public use and frequent cleaning | |
| private club lounge | Low-profile design maintains open sightlines across seating groups | |
| recommended pairing | Matches 3-seat sofa and two single armchairs in coordinated upholstery |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 15372:2008 | Furniture – Strength, durability and safety for non-domestic tables | |
|---|---|---|
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic dining tables, lounge table reference |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.5-2021 | Standard for desk products, applicable as reference for commercial lounge table performance | |
|---|---|---|
| ANSI/BIFMA e3-2019 | Sustainability standard for furniture, optional for eco-friendly procurement requirements |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to tabletop substrate and finish | |
|---|---|---|
| GB/T 4893.8-2985 | Surface abrasion resistance test method for furniture finishes, applicable to laminate top |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to tabletop substrate and finish; 2. GB/T 4893.8-2985: Surface abrasion resistance test method for furniture finishes, applicable to laminate top; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool