| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Three-seater sofa overall dimensions | 2160 x 900 x 910 mm | |
|---|---|---|
| Single armchair overall dimensions | 1140 x 900 x 910 mm | |
| Matching coffee table overall dimensions | 1500 x 800 x 460 mm | |
| Seat height from floor | 430 mm | |
| Seat depth per seating position | 580 mm | |
| Seat-back angle | 108° | |
| Sofa base arch clearance | 225 mm | |
| Curved wood armrest width | 120 mm | |
| Seat foam thickness | 100 mm | |
| Backrest foam thickness | 80 mm | |
| Coffee table lower shelf height | 150 mm | |
| Total seating layout footprint | 3600 x 2800 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Total set gross weight | 180 kg | |
|---|---|---|
| Per-seat static load capacity | 160 kg | |
| Total three-seater sofa static load | 500 kg | |
| Seat foam density | 40 kg/m³ | |
| Back foam density | 35 kg/m³ | |
| Foam rebound rate | 50% | |
| PU leather abrasion resistance | 50000 cycles | |
| Seam stitch pitch | 30 mm | |
| Wood frame moisture content | 12% | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seating upholstery | 1.2mm thick olive green wear-resistant PU (Xipi) leather | |
|---|---|---|
| Internal sofa frame | Kiln-dried anti-corrosion treated solid pine + 12mm multi-layer bentwood | |
| Armrest and base trim | Polished solid hardwood with walnut-toned clear lacquer finish | |
| Seat support system | Manganese steel coil springs + 50mm wide elastic rubber webbing | |
| Seat filling | 3-layer high-resilience polyurethane foam | |
| Backrest filling | High-density polyurethane foam with tufted lumbar support pad | |
| Coffee table top | 25mm thick blockboard with natural wood veneer, polished lacquer finish | |
| Coffee table frame and legs | Solid hardwood with matching walnut-toned lacquer | |
| Foot pads | Non-slip hard plastic floor protection pads | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide | |
| Leg Connector Specification | Reference M8-M10 with at least 1 mechanical fixing per leg |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Two single armchairs + one three-seat sofa arranged in U-shaped conversational layout | |
|---|---|---|
| Seating posture support | Fixed 108° upright seat-back angle for guest reception use, no recline mechanism | |
| Base foot clearance | Arched cutout at sofa base allows 225mm clearance for foot placement and cleaning | |
| Coffee table storage | Open lower shelf on coffee table for document and accessory storage | |
| Surface performance | PU leather upholstery is anti-fouling and scratch-resistant for high-traffic lobby use | |
| Armrest function | Wide curved solid wood armrests provide stable arm support for seated guests | |
| Assembly structure | Knock-down construction for transport, with on-site assembly required | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| Executive office reception areas | Formal styling for welcoming business guests and client meetings | |
|---|---|---|
| Corporate lobby waiting spaces | High-traffic durable upholstery suitable for daily visitor use | |
| Government meeting lounge areas | Conservative professional design meets public sector reception requirements | |
| Hotel business center seating | Coordinated set for guest waiting and casual discussion spaces | |
| Recommended complementary furniture | Coordinated area rug and potted greenery for formal commercial interior styling |
EU Market Access Requirements* EN Standards
| EN 13759:2012 | Domestic and contract seating strength and durability test methods applicable | |
|---|---|---|
| EN 1022:2018 | Seating stability test requirements for contract office reception furniture |
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.4 |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to solid wood table and trim components | |
|---|---|---|
| GB/T 16799-2008 | Requirements for polyurethane synthetic leather used in furniture upholstery | |
| GB 18584-2001 | Indoor decoration material formaldehyde emission limit for wood furniture | |
| GB/T 19001-2016 | Quality management system reference for commercial furniture supply |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to solid wood table and trim components; 2. GB/T 16799-2008: Requirements for polyurethane synthetic leather used in furniture upholstery; 3. GB 18584-2001: Indoor decoration material formaldehyde emission limit for wood furniture; 4. GB/T 19001-2016: Quality management system reference for commercial furniture supply; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
