| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Set overall layout dimensions | 3600mm W (arrangement width) × 1800mm D (arrangement depth) | |
|---|---|---|
| 2-seater sofa dimensions | 1550mm W × 850mm D × 840mm H | |
| Single armchair dimensions | 800mm W × 850mm D × 840mm H | |
| Coffee table dimensions | 1100mm W × 600mm D × 480mm H | |
| Seat height (all seating units) | 430mm | |
| Seat depth (all seating units) | 550mm | |
| Backrest height (seating units) | 420mm above seat surface | |
| Armrest height (seating units) | 200mm above seat surface | |
| Coffee table drawer internal dimensions | 500mm W × 450mm D × 100mm H | |
| Coffee table lower slatted shelf clearance | 180mm between shelf and tabletop frame | |
| Seating leg height | 150mm from floor to seat base | |
| Upholstery thickness (seat cushion) | 120mm | |
| Upholstery thickness (backrest) | 80mm | |
| Seat cushion padding thickness | 120mm | |
| Backrest padding thickness | 80mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Set total net weight range | 160 kg | |
|---|---|---|
| Per-seat static load capacity | 150kg | |
| Recommended total occupancy for set | 4 people | |
| Upholstery abrasion resistance | ≥40,000 Martindale cycles | |
| Seat foam density | 40kg/m³ high-resilience cold-cure polyurethane foam | |
| Foam compression set resistance | ≤10% after 80,000 compression cycles | |
| Frame durability rating | ≥100,000 seat load cycles without loosening, deformation or abnormal noise | |
| Surface performance (upholstery) | Water-resistant, scratch-resistant, stain-resistant, easy to wipe clean | |
| Upholstery surface performance | Water-resistant, scratch-resistant, stain-resistant, easy to wipe clean | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles | |
| Five-star Base Static Load Reference | Acceptance target ≥120 kg; chair reference load 150 kg | |
| Caster Rolling Durability Reference | Acceptance target 30000 cycles | |
| Gas-lift Cycling Reference | Acceptance target 100000 cycles | |
| Upholstery Seam Pitch | 4 mm |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seating upholstery | Brown PU synthetic leather (Xipi), 1.0mm thickness | |
|---|---|---|
| Seat cushion filling | High-density high-resilience polyurethane foam, 120mm thickness, wrapped with 20mm soft foam top layer | |
| Backrest filling | High-density polyurethane foam, 80mm thickness, with matching lumbar support pad | |
| Seating internal frame | Kiln-dried solid pine/larch wood + 15mm thick AAA grade plywood, reinforced with corner blocks | |
| Seat support system | 3.6mm gauge sinuous steel springs + 50mm wide elastic webbing, spaced 100mm apart | |
| Seating legs | 1.5mm wall thickness black powder-coated carbon steel, angled tapered design with floor protection glides | |
| Coffee table top | 12mm thick white sintered stone or high-pressure laminate, matte finish, rounded edge treatment | |
| Coffee table frame | 1.5mm wall thickness black powder-coated carbon steel open rectangular frame, welded joints | |
| Coffee table drawer | 15mm thick MDF drawer box with brown wood-effect laminate front, mounted on full-extension ball bearing slides | |
| Coffee table lower shelf | 8mm diameter black powder-coated steel slats, 30mm spacing between slats | |
| Stitching details | Matching brown polyester thread, 8 stitches per 30mm seam pitch, reinforced stress points at armrest and seat corners | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel | |
| Five-star Base Material Thickness | Metal base wall 3.5 mm; diameter 700 mm | |
| Caster Engineering Specification | 5 PU-tread swivel casters, 60 mm diameter | |
| Reference Color Count | Recommended 5upholstery colors and 2base finishes |
Adjustment / rotation / tilt / mobility / storage features
| Seating design | Fixed static non-adjustable design, no recline, swivel or height adjustment mechanisms | |
|---|---|---|
| Backrest support | Segmented padded backrest with separate lumbar cushion, provides ergonomic lumbar support for upright waiting posture | |
| Armrest design | Integrated square padded track arms, full length from seat front to back, provides consistent arm support during extended waiting | |
| Coffee table storage | Single central full-extension drawer for concealed storage of tea supplies, coasters and small reception items | |
| Coffee table open storage | Lower slatted metal shelf for open storage of magazines, brochures or spare water bottles | |
| Surface maintenance | Smooth non-porous leather and stone/laminate surfaces, wipe clean with damp cloth, no special cleaning products required | |
| Floor protection | All seating and table legs fitted with non-marking plastic glides to prevent scratching polished hard floors | |
| Customization support | Custom upholstery color, material grade (PU/semi-PU/top-grain leather) and size adjustments available for bulk commercial orders | |
| Backrest tilt angle | 105° from seat surface | |
| Seating structural design | Fixed static non-adjustable design, no recline, swivel or height adjustment mechanisms, rigid frame connection for stable support | |
| Backrest ergonomic support | Segmented padded backrest with separate loose lumbar cushion, fixed 105° recline angle from seat surface that balances upright formality and waiting comfort | |
| Armrest support design | Integrated square padded track arms, full length from seat front to back frame, 80mm wide padded top surface provides consistent arm support during extended waiting | |
| Coffee table concealed storage | Single central full-extension drawer with flush metal handle, 10kg load rating for concealed storage of tea supplies, coasters and small reception items | |
| Surface maintenance design | Smooth non-porous upholstery and tabletop surfaces, wipe clean with damp neutral cloth in <1 minute per stain, no special cleaning products required for daily upkeep |
Verified carton / gross weight / assembly / loading data
| Packaging configuration | 3 separate cartons per set: 2 cartons for single armchairs, 1 carton for 2-seater sofa, 1 carton for coffee table components; KD (knock-down) packing with legs removed to reduce volume | |
|---|---|---|
| Single armchair carton dimensions | 850mm × 900mm × 600mm per carton, 2 cartons total | |
| 2-seater sofa carton dimensions | 1600mm × 900mm × 650mm per carton, 1 carton total | |
| Coffee table carton dimensions | 1250mm × 700mm × 200mm per carton, 1 carton total | |
| Total set gross weight | 170 kg | |
| Total set shipping volume (CBM) | 1.92CBM | |
| Assembly time | 40 minutes for 2 people with included hardware (allen key, screws, assembly instructions) | |
| 40ft HQ container loading capacity | 65complete sets | |
| Packaging protection | 50mm thick foam corner protection, EPE foam wrap for upholstered surfaces, 5-layer corrugated export cartons, hardware packed in sealed labeled bags | |
| Reference Package Count | 1 set / 2 cartons |
Recommended spaces / users / usage modes
| Office reception lobbies | Suitable for corporate office entrance reception and visitor waiting areas, formal brown leather-look finish matches professional commercial decor | |
|---|---|---|
| Business negotiation areas | Suitable for small client meeting and negotiation spaces, symmetrical conversational layout supports face-to-face discussion across central coffee table | |
| Hotel and public service waiting areas | Suitable for hotel lobbies, bank waiting zones, government service halls and other high-traffic public spaces, durable easy-clean surfaces withstand frequent daily use | |
| Executive office breakout spaces | Suitable for placement in executive office ancillary waiting or informal meeting areas, compact footprint fits small to medium sized office spaces | |
| Recommended matching configuration | Pair with 2000×3000mm low-pile commercial area rug under the set to reduce noise and define the reception zone, no additional side tables required due to integrated coffee table storage | |
| User target group | Designed for adult visitors and guests in formal commercial environments, upright seat angle supports formal professional interactions rather than casual lounging | |
| Corporate office reception lobbies | Suitable for 30sqm corporate office entrance reception and visitor waiting areas, formal brown leather-look finish matches professional commercial decor and neutral office color schemes | |
| Small business negotiation areas | Suitable for 20sqm closed client meeting and negotiation spaces, symmetrical U-shaped conversational layout supports face-to-face discussion across the central coffee table for 4-person discussions | |
| High-traffic public service waiting areas | Suitable for hotel lobbies, bank waiting zones, government service halls and other high-traffic public spaces with >50 daily visitors, durable easy-clean surfaces withstand frequent daily use and rapid cleaning between guest cycles | |
| Executive office ancillary spaces | Suitable for placement in executive office adjacent waiting or informal meeting zones, compact 3.6m total arrangement width fits small to medium sized 35sqm office spaces without crowding work areas |
EU Market Access Requirements* EN Standards
| EN 13759:2012 | Furniture - Seating - Test methods for the determination of durability, applicable to cyclic load testing of sofa frames and cushions for commercial use | |
|---|---|---|
| EN 1022:2018 | Furniture - Seating - Determination of stability, applicable to verifying seating units do not tip under normal use loads | |
| EN 12520:2015 | Furniture - Strength, durability and safety - Requirements for domestic and contract seating, minimum performance thresholds for commercial contract grade furniture | |
| EN 15372:2008 | Furniture - Strength, durability and safety - Requirements for non-domestic tables, applicable to coffee table structural load capacity and stability for commercial contract use |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to solid wood/plywood internal frame quality, dimensional tolerance and structural safety of seating units | |
|---|---|---|
| GB/T 1952.1-2012 | Upholstered furniture: sofas, applicable to seating durability, foam performance, upholstery adhesion and structural strength testing | |
| GB 18584-2001 | Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, formaldehyde emission limit ≤1.5mg/L for wood components | |
| GB 20286-2006 | Requirements and mark on burning behavior of fire retarding products and subassemblies in public places, B1 flame retardant grade optional for high-traffic public reception areas |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to solid wood/plywood internal frame quality, dimensional tolerance and structural safety of seating units; 2. GB/T 1952.1-2012: Upholstered furniture: sofas, applicable to seating durability, foam performance, upholstery adhesion and structural strength testing; 3. GB 18584-2001: Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture, formaldehyde emission limit ≤1.5mg/L for wood components; 4. GB 20286-2006: Requirements and mark on burning behavior of fire retarding products and subassemblies in public places, B1 flame retardant grade optional for high-traffic public reception areas; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
