Product supplierTan Upholstered Three-Seat Sofa with Matching Lounge Armchair, Tan full-grain-style leather-look surface with sewn panel breaks
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 2380 × 960 × 890 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Sofa net weight | 78 kg | |
|---|---|---|
| Sofa distributed static load | 300 kg | |
| Armchair static load | 130 kg | |
| Seat foam density | 35 kg/m3 | |
| Back foam density | 28 kg/m3 | |
| Foam rebound | 42% | |
| Seat cushion indentation load | 110 N at 25% compression | |
| Leg assembly static load point | 75 kg per leg | |
| Color options in visible set | 1 color, tan | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer upholstery | Tan full-grain-style leather-look surface with sewn panel breaks | |
|---|---|---|
| Seat cushion construction | 150 mm high-resilience foam pad wrapped in soft upholstery batting | |
| Back cushion construction | Horizontally segmented padded back pads over a rigid upholstered frame | |
| Internal support frame | Kiln-dried hardwood rails and structural composite board, 28 mm nominal rail section | |
| Suspension system | Elastic webbing deck with 80 mm spacing beneath the three seat cushions | |
| Legs | Four polished chrome-finish metal legs per sofa and four per armchair with splayed feet |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating function | Fixed three-seat sofa plus fixed one-seat armchair for face-to-face lounge seating | |
|---|---|---|
| Back support | Two-layer padded backrest provides lumbar and upper-back support across each seat | |
| Arm support | Integrated padded arms form continuous side panels and support entry from either side | |
| Floor protection | Exposed metal feet require supplier-fitted felt glides for hard floors and nylon glides for carpet |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive lounge | Suitable for reception rooms and executive lounge areas where a three-seat sofa and one private seat support small-group conversation | |
|---|---|---|
| Residential living room | Suitable for a contemporary living room paired with low stone or glass occasional tables on a large soft rug |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| Seating strength and durability | EN 16139:2013+A2:2023 applies to non-domestic seating strength, durability, and safety if specified for office or contract use | |
|---|---|---|
| Upholstered furniture safety | EN 1021:2014 applies to cigarette ignition resistance of upholstered furniture combinations | |
| Furniture dimensions | EN 1335:2020 is not directly applicable to this lounge form but may inform body-clearance review for office lounge areas |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| Seating structural verification | ANSI/BIFMA X2023applies to general-purpose lounge seating performance when used in public or workplace settings |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| Upholstered furniture safety | GB/T 3324applies to general wooden-furniture dimensions, finish, and structural inspection if the frame is wood-based | |
|---|---|---|
| Formaldehyde emission | GB 18580applies to wood-based panels used inside the upholstered frame | |
| Upholstered furniture durability | GB/T 31900applies to seating mechanical safety, stability, and durability test methods |
Standardized tender description text
This product must meet the following technical requirements: 1. Upholstered furniture safety: GB/T 3324applies to general wooden-furniture dimensions, finish, and structural inspection if the frame is wood-based; 2. Formaldehyde emission: GB 18580applies to wood-based panels used inside the upholstered frame; 3. Upholstered furniture durability: GB/T 31900applies to seating mechanical safety, stability, and durability test methods; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool