| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Two-seater sofa overall dimensions | 1850 x 750 x 850 mm | |
|---|---|---|
| Single armchair overall dimensions | 850 x 750 x 800 mm | |
| Coffee table overall dimensions | 1200 x 600 x 480 mm | |
| Seat height from floor | 460 mm | |
| Seat depth for all seating units | 550 mm | |
| Seat back height above seat | 400 mm | |
| Armrest height above floor | 650 mm | |
| Lower coffee table shelf clearance | 200 mm | |
| Coffee table top thickness | 10 mm | |
| Metal frame tube wall thickness | 1.5 mm | |
| Seating set total occupied footprint | 3200 x 2400 mm | |
| Knee clearance under coffee table | 420 mm | |
| Sled base rubber foot diameter | 50 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm |
Net weight / load capacity / users / durability
| Total set net weight | 145 kg | |
|---|---|---|
| Seat static load capacity per position | 160 kg | |
| Seat foam density | 35 kg/m³ | |
| Seat foam rebound rate | 45% | |
| Upholstery abrasion resistance | 50000 cycles | |
| Frame anti-rust coating durability | 10 years | |
| Recommended maximum user capacity per seating unit | 1 person | |
| Seam stitch pitch | 8 stitches per 30mm | |
| Warranty for manufacturing defects | 3 years | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat and back upholstery | Grey PU faux leather, 1.2mm thick, stain-resistant wipe-clean finish | |
|---|---|---|
| Seat core padding | 35D high-resilience polyurethane foam, wrapped in soft top layer | |
| Seating support frames | 1.5mm thick square steel tube, matte black powder-coated finish | |
| Armrest top caps | Integral padded faux leather matching seat upholstery, mounted on steel arms | |
| Frame foot pads | Non-marking black rubber, fitted to sled base ends to protect flooring | |
| Coffee table tops | 10mm thick black tempered safety glass for upper and lower shelves | |
| Coffee table support structure | Black powder-coated steel X-shaped central support and perimeter legs | |
| Internal seat support | Reinforced steel cross bracing under seat foam to prevent sagging | |
| Lower shelf base frame | Square steel tubing supporting lower glass shelf, welded to central support | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm |
Adjustment / rotation / tilt / mobility / storage features
| Cantilever sled base design | Fixed non-swivel, non-reclining structure with gentle flex for seating comfort | |
|---|---|---|
| Fixed backrest support | Static 110° recline angle optimized for upright visitor seating | |
| Coffee table dual-tier storage | Upper surface for refreshments, lower open shelf for reading material storage | |
| Floor protection design | Rubber pads on all frame feet prevent scratches on tile or hard flooring pads | |
| Upholstery maintenance feature | Wipe-clean non-porous faux leather resists common office spills and stains | |
| Frame corrosion resistance | Powder-coated finish prevents rust from regular cleaning and indoor humidity | |
| Modular layout flexibility | Units can be arranged in multiple groupings to fit reception room dimensions | |
| Seat load distribution | Even weight spread across steel frame prevents permanent foam deformation | |
| Backrest fixed recline angle | 110 degrees | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Corporate office reception areas | Formal commercial aesthetic creates professional first impression for visitors | |
|---|---|---|
| Waiting rooms for professional firms | Durable upholstery and sturdy frames withstand high daily visitor traffic | |
| Employee lounge and break areas | Comfortable fixed seating supports short rest periods during work breaks | |
| Small meeting and discussion zones | Conversational layout facilitates informal small group discussions around table | |
| Hotel business center lobbies | Contract-grade construction suitable for continuous public use in hospitality spaces | |
| Public institution visitor areas | Meets basic durability and load requirements for public sector facility use | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| EN 13761:2002 | Safety, strength and durability requirements for office visitor seating | |
|---|---|---|
| EN 12521:2015 | Strength, durability and safety requirements for domestic and contract tables | |
| EN 1022:2005 | Stability testing standard for seating furniture for general use |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2020 | Performance standard for lounge and public area seating in commercial spaces | |
|---|---|---|
| ANSI/BIFMA X5.5-2021 | Performance and durability standard for desk and occasional tables |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements applicable to wooden and metal furniture for office use | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit for harmful substances in wooden furniture | |
| GB/T 19995.1-2005 | Technical requirements for natural and artificial leather used in upholstered furniture |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements applicable to wooden and metal furniture for office use; 2. GB 18584-2001: Indoor decoration material limit for harmful substances in wooden furniture; 3. GB/T 19995.1-2005: Technical requirements for natural and artificial leather used in upholstered furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
