3+1 Seater Executive Office Reception Sofa Set, Grey Upholstered with Dark Wood Arm Inlays, Plinth Base (model OFS-PLW-31G-2400) is listed under Faux Leather Sofa. Dimensions: 2400 × 850 × 860 mm. Materials: 1.2mm thick grey PU faux leather, scratch-resistant matte finish. Load capacity: 227 kg. Product Features: commercial,furniture,fixed-seating,design,plinth,base,construction,armrests. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | QILISEN | Model | OFS-PLW-31G-2400 |
| Overall dimensions (W × D × H) | 2400 × 850 × 860 mm | standard seat height | 450 mm |
| seat depth (usable per seat position) | 620 mm | backrest height above seat | 410 mm |
| armrest height above seat | 180 mm | dark wood arm inlay panel dimensions | 320 x 120 mm |
| plinth base height | 60 mm | per-seat usable width (3-seater) | 720 mm |
| seat cushion thickness | 150 mm | Back Cushion Thickness | 160 mm |
| Leg Height / Floor Clearance | 160 mm | total set net weight | 112 kg |
| static load capacity per seat | 227 kg | seat foam density | 40 kg/m³ |
| foam rebound rate | 60% | PU leather abrasion resistance | 50000 cycles |
| wood frame moisture content | 8% | standard commercial warranty period | 6 years |
| available color options | 5 | Seat Foam Density / Rebound | 40 kg/m³ / 60% |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm | upholstery | 1.2mm thick grey PU faux leather, scratch-resistant matte finish |
| internal frame | Kiln-dried, insect-treated solid hardwood frame, 25mm section thickness | seat suspension | 3.2mm diameter manganese steel S-springs, 80mm spacing, balance wiring |
| cushion filling | 40 density high-resilience polyurethane foam, wrapped with 20mm soft foam layer | armrest accent panels | 0.6mm thick dark walnut wood veneer over MDF core, recessed fit |
| plinth base | Powder-coated dark grey engineered wood frame with integrated floor glides | stitching details | Nylon-bonded thread, 30mm seam pitch, matched edge piping |
| backrest support | Elastic webbing straps, 50mm width, 100mm grid spacing | Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide | Leg Connector Specification | Reference M8-M10 with at least 1 mechanical fixing per leg |
| Reference Upholstery Color Count | Recommended 8fabric/leather color options | seating configuration | Fixed 1+3 set, no modular connectors, designed for permanent reception arrangement |
| recline mechanism | Fixed upright back angle of 105 degrees, no recline or tilt adjustment | armrest function | Wide padded armrests with integrated wood accent panels, 180mm above seat, load rated for 100kg |
| assembly type | Knock-down assembly, hardware included, base attaches to seat frame with bolted connections | floor protection | Integrated non-marking plastic glides on plinth base bottom, no caster wheels |
| upholstery maintenance | Wipe-clean surface, compatible with mild detergent, resistant to light stains | structural stability | Full perimeter plinth base distributes weight evenly, 4-point floor contact, no wobble at rated load |
| back support function | Contoured fixed backrest provides lumbar support at 200mm above seat, no adjustable lumbar | Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
| Reference Package Count | 1 set / 2 cartons | Reference Assembly Time | 40 minutes per set |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | Reference Packaging Volume | 1.8 m³/item |
| Reference Packaged Gross Weight | 110 kg/item | executive office reception areas | Formal blocky styling with wood accents creates professional impression for visiting guests |
| corporate waiting lounges | Fixed upright seating supports short to medium wait times, durable wipe-clean upholstery | government or institutional meeting spaces | Neutral grey finish and sturdy plinth base fit formal public space design requirements |
| bank or financial institution client areas | Wood accent details convey premium professional aesthetic, per-seat load rated for universal use | configuration note | Single chair placed at 90 degrees to 3-seater to create L-shaped guest conversation grouping |
| surface placement | Suitable for placement on low-pile carpet or hard commercial flooring with integrated glides | recommended pairing | Matches with dark wood office coffee tables and executive desks for cohesive office design |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 2400 × 850 × 860 mm | |
|---|---|---|
| standard seat height | 450 mm | |
| seat depth (usable per seat position) | 620 mm | |
| backrest height above seat | 410 mm | |
| armrest height above seat | 180 mm | |
| dark wood arm inlay panel dimensions | 320 x 120 mm | |
| plinth base height | 60 mm | |
| per-seat usable width (3-seater) | 720 mm | |
| seat cushion thickness | 150 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| total set net weight | 112 kg | |
|---|---|---|
| static load capacity per seat | 227 kg | |
| seat foam density | 40 kg/m³ | |
| foam rebound rate | 60% | |
| PU leather abrasion resistance | 50000 cycles | |
| wood frame moisture content | 8% | |
| standard commercial warranty period | 6 years | |
| available color options | 5 | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| upholstery | 1.2mm thick grey PU faux leather, scratch-resistant matte finish | |
|---|---|---|
| internal frame | Kiln-dried, insect-treated solid hardwood frame, 25mm section thickness | |
| seat suspension | 3.2mm diameter manganese steel S-springs, 80mm spacing, balance wiring | |
| cushion filling | 40 density high-resilience polyurethane foam, wrapped with 20mm soft foam layer | |
| armrest accent panels | 0.6mm thick dark walnut wood veneer over MDF core, recessed fit | |
| plinth base | Powder-coated dark grey engineered wood frame with integrated floor glides | |
| stitching details | Nylon-bonded thread, 30mm seam pitch, matched edge piping | |
| backrest support | Elastic webbing straps, 50mm width, 100mm grid spacing | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide | |
| Leg Connector Specification | Reference M8-M10 with at least 1 mechanical fixing per leg | |
| Reference Upholstery Color Count | Recommended 8fabric/leather color options |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| seating configuration | Fixed 1+3 set, no modular connectors, designed for permanent reception arrangement | |
|---|---|---|
| recline mechanism | Fixed upright back angle of 105 degrees, no recline or tilt adjustment | |
| armrest function | Wide padded armrests with integrated wood accent panels, 180mm above seat, load rated for 100kg | |
| assembly type | Knock-down assembly, hardware included, base attaches to seat frame with bolted connections | |
| floor protection | Integrated non-marking plastic glides on plinth base bottom, no caster wheels | |
| upholstery maintenance | Wipe-clean surface, compatible with mild detergent, resistant to light stains | |
| structural stability | Full perimeter plinth base distributes weight evenly, 4-point floor contact, no wobble at rated load | |
| back support function | Contoured fixed backrest provides lumbar support at 200mm above seat, no adjustable lumbar | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| executive office reception areas | Formal blocky styling with wood accents creates professional impression for visiting guests | |
|---|---|---|
| corporate waiting lounges | Fixed upright seating supports short to medium wait times, durable wipe-clean upholstery | |
| government or institutional meeting spaces | Neutral grey finish and sturdy plinth base fit formal public space design requirements | |
| bank or financial institution client areas | Wood accent details convey premium professional aesthetic, per-seat load rated for universal use | |
| configuration note | Single chair placed at 90 degrees to 3-seater to create L-shaped guest conversation grouping | |
| surface placement | Suitable for placement on low-pile carpet or hard commercial flooring with integrated glides | |
| recommended pairing | Matches with dark wood office coffee tables and executive desks for cohesive office design |
EU Market Access Requirements* EN Standards
| EN 13761:2002 | Applicable to office visitor seating strength, durability and stability requirements | |
|---|---|---|
| EN 1021-1:2014 | Applicable to upholstered furniture ignitability (cigarette ignition source test) |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2021 | Applicable to lounge and public seating performance, durability and structural safety | |
|---|---|---|
| ANSI/BIFMA e3-2019 | Applicable to furniture sustainability and material emission level verification |
Standards applicable to China-market projects
| GB/T 3324-2017 | Applicable to wooden frame general technical requirements for furniture strength and stability | |
|---|---|---|
| GB 20400-2006 | Applicable to leather/faux leather upholstery harmful substance limit testing | |
| GB/T 1952.1-2012 | Applicable to upholstered furniture sofa durability and performance testing |
This product must meet the following technical requirements: 1. GB/T 3324-2017: Applicable to wooden frame general technical requirements for furniture strength and stability; 2. GB 20400-2006: Applicable to leather/faux leather upholstery harmful substance limit testing; 3. GB/T 1952.1-2012: Applicable to upholstered furniture sofa durability and performance testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp