| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| 3-seater sofa overall dimensions | 2280 x 900 x 770 mm | |
|---|---|---|
| Single armchair overall dimensions | 1080 x 840 x 760 mm | |
| Large coffee table overall dimensions | 1400 x 700 x 450 mm | |
| Small side table overall dimensions | 650 x 650 x 450 mm | |
| Seat height from floor | 420 mm | |
| Seat depth for all seating units | 580 mm | |
| Armrest height from seat surface | 180 mm | |
| Backrest height from seat surface | 380 mm | |
| Lower open storage cavity height (coffee tables) | 200 mm | |
| Set total layout footprint (rug area) | 3600 x 3200 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Total set net weight | 185 kg | |
|---|---|---|
| Per-seat static load capacity | 160 kg | |
| Upholstery abrasion resistance (Martindale) | 50000 cycles | |
| Cushion foam density | 45 kg/m³ | |
| Foam rebound rate | 60% | |
| Seam stitch pitch | 8 stitches per inch | |
| Structural frame warranty | 6 years | |
| 40HQ container loading quantity | 30 sets | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seating upholstery | 1.2mm thick dark grey PU leather, matte finish | |
|---|---|---|
| Inner seating frame | Kiln-dried solid hardwood frame, 30mm section thickness | |
| Seat cushion core | High-density polyurethane foam, 120mm thick, no sinuous springs visible | |
| Backrest cushion core | High-density polyurethane foam, 80mm thick, vertical paneled construction | |
| Armrest outer panels | Rigid engineered wood frame with vertical slat dark accent trim, PU wrapped | |
| Coffee table tops | Matte dark grey engineered wood, 25mm thick, edge-banded | |
| Table lower storage trim | Black vertical slat paneling matching armrest accent detail | |
| Support feet (seating and tables) | Brushed stainless steel, 20mm height, polished trim edge | |
| Upholstery stitching | High-tensile polyester thread, reinforced stress points at arm/seat joints | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% | |
| Spring / Webbing Specification | Sinuous spring wire 4 mm; elastic webbing 70 mm wide | |
| Leg Connector Specification | Reference M8-M10 with at least 1 mechanical fixing per leg |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | 3-seater sofa plus two single armchairs, fixed stationary position | |
|---|---|---|
| Coffee table storage | Open lower shelf cavity for temporary storage of reading materials | |
| Seating design | Fully fixed non-reclining backrests and seats for formal upright posture | |
| Set coordination | Matching color and slat-accent design across all seating and table pieces | |
| Surface cleaning | Smooth non-porous PU upholstery enables wipe-down cleaning for high-traffic use | |
| Floor protection | Smooth stainless steel feet prevent scratching of hard wood or tile floors | |
| Armrest utility | Wide blocky armrests support arm weight and temporary placement of small items | |
| Cushion Service Configuration | Recommended 2removable/replaceable cushion methods |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Module Carton Dimensions | 2200× 1050× 850 mm | |
| Reference Packaging Volume | 1.8 m³/item | |
| Reference Packaged Gross Weight | 110 kg/item |
Recommended spaces / users / usage modes
| Executive office reception areas | Formal blocky design creates professional first impression for visiting guests | |
|---|---|---|
| VIP executive lounge spaces | High-end styling and deep cushioned seating suitable for extended visitor waits | |
| Corporate boardroom ante-rooms | Coordinated matching tables and seating complement premium executive desk setups | |
| Bank and government lobby waiting zones | Durable commercial construction withstands high daily visitor traffic | |
| Hotel business center lounges | Neutral dark grey color scheme integrates with most modern commercial interior designs | |
| Recommended layout placement | Centered on 3.6x3.2m area rug with 600mm clearance around all seating units |
EU Market Access Requirements* EN Standards
| EN 13759:2004 | Domestic and contract seating – Test methods for strength and durability | |
|---|---|---|
| EN 1022:2018 | Furniture – Seating – Determination of stability | |
| EN 12521:2015 | Furniture – Strength, durability and safety requirements for non-domestic seating |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2021 | Standard for lounge and public seating, applicable to all seating units | |
|---|---|---|
| ANSI/BIFMA X7.1-2021 | Standard for formaldehyde and TVOC emissions from office furniture |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to table and frame components | |
|---|---|---|
| GB 20400-2006 | Limit of harmful substances in leather and faux leather upholstery | |
| GB/T 19001-2016 | Quality management system guidance for furniture manufacturing supply |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to table and frame components; 2. GB 20400-2006: Limit of harmful substances in leather and faux leather upholstery; 3. GB/T 19001-2016: Quality management system guidance for furniture manufacturing supply; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
