| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| 2-seat sofa overall dimensions | 1943 x 826 x 914 mm | |
|---|---|---|
| Single armchair overall dimensions | 1168 x 902 x 914 mm | |
| Coffee table overall dimensions | 800 x 800 x 420 mm | |
| Seat height (all seating pieces) | 495 mm | |
| Seat depth (all seating pieces) | 580 mm | |
| Seat width per position | 870 mm | |
| Armrest height above seat | 200 mm | |
| Arm drawer internal dimensions | 450 x 300 x 120 mm | |
| Coffee table glass thickness | 10 mm | |
| Metal leg tube thickness (seating) | 1.5 mm | |
| Floor clearance under seating | 120 mm | |
| Back cushion total height | 420 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Total set net weight | 180 kg | |
|---|---|---|
| Weight capacity per seating position | 136 kg | |
| Coffee table top static load capacity | 30 kg | |
| Cushion foam density | 40 kg/m³ | |
| Cushion foam rebound rate | 60% | |
| Upholstery abrasion resistance | 50000 double rubs | |
| Recommended maximum simultaneous users | 4 people | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seating upholstery | 1.2mm thick matte faux leather (microfiber) | |
|---|---|---|
| Drawer front panels | Matte orange painted MDF | |
| Internal seating frame | Kiln-dried solid hardwood frame with corner block reinforcement | |
| Cushion support core | High-density polyurethane foam with sinuous spring support | |
| Seating leg and base structure | Matte black powder-coated carbon steel sled frame | |
| Coffee table tabletop | Clear tempered safety glass with polished rounded edge | |
| Coffee table base structure | Matte black powder-coated steel cross-form sled base | |
| Drawer hardware | Cold-rolled steel side-mount drawer slides with recessed integrated pull | |
| Floor protection pads | Non-marking felt pads affixed to bottom of all metal feet | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm |
Adjustment / rotation / tilt / mobility / storage features
| Integrated arm storage access | Pull-out drawer on each outer arm panel opens horizontally to store small living room items | |
|---|---|---|
| Stationary seating support | Fixed non-reclining, non-tilting seat and back structure designed for upright lounge seating | |
| Coffee table surface function | Fixed-height round tabletop provides shared surface for drinks, decor and reading materials positioned centrally for seating group | |
| Seating leg stability | Cantilevered sled base distributes weight evenly across floor to eliminate rocking on flat surfaces | |
| Upholstery maintenance | Smooth non-porous faux leather surface wipes clean with damp cloth for everyday spill removal | |
| Cushion retention | Attached seat and back cushions secured to frame to prevent shifting during regular use | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
Recommended spaces / users / usage modes
| Residential living room layout | Conversational seating arrangement centered on coffee table for family gathering and guest reception | |
|---|---|---|
| Modern apartment lounge use | Low-profile sled base and two-tone finish fits contemporary minimalist and mid-century modern interiors | |
| Office reception lounge application | Durable faux leather upholstery suitable for low-traffic executive waiting areas and breakout spaces | |
| Recommended floor pairing | Performs well on low-pile area rugs and smooth hard flooring such as tile, wood or luxury vinyl | |
| Recommended complementary pieces | Pairs with narrow side tables and minimal floor lamps to complete a curated contemporary lounge layout | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Strength, durability and safety standard for residential seating furniture | |
|---|---|---|
| EN 1022:2019 | Stability test standard for domestic seating to verify tip-over resistance | |
| EN 12150-1:2015 | Toughened safety glass standard applicable to coffee table glass top performance |
Standards applicable to China-market projects
| GB/T 19001-2016 | Quality management system guideline applicable to furniture manufacturing process control | |
|---|---|---|
| GB/T 3324-2017 | General technical requirements standard for wooden furniture applicable to internal frame and drawer components | |
| GB 28007-2011 | Safety standard for upholstered furniture applicable to flame resistance and structural stability | |
| GB/T 15102-2017 | Standard for polyvinyl chloride artificial leather upholstery material performance testing |
This product must meet the following technical requirements: 1. GB/T 19001-2016: Quality management system guideline applicable to furniture manufacturing process control; 2. GB/T 3324-2017: General technical requirements standard for wooden furniture applicable to internal frame and drawer components; 3. GB 28007-2011: Safety standard for upholstered furniture applicable to flame resistance and structural stability; 4. GB/T 15102-2017: Standard for polyvinyl chloride artificial leather upholstery material performance testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
