| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Two-seater sofa overall dimensions | 1800 x 850 x 820 mm | |
|---|---|---|
| Single armchair overall dimensions | 950 x 850 x 820 mm | |
| Tea table overall dimensions | 1300 x 700 x 500 mm | |
| Seat height (floor to top of seat cushion) | 420 mm | |
| Seat depth (front edge of seat to back cushion) | 580 mm | |
| Seat width per single seat position | 650 mm | |
| Armrest height (floor to top of armrest) | 630 mm | |
| Backrest total height (seat surface to top of backrest) | 400 mm | |
| Leg height (floor to bottom of sofa base frame) | 120 mm | |
| Armrest width | 120 mm | |
| Tea table lower shelf height (floor to shelf surface) | 200 mm | |
| Tea table lower shelf dimensions | 1150 x 550 mm | |
| Seat Cushion Thickness | 180 mm | |
| Back Cushion Thickness | 160 mm | |
| Leg Height / Floor Clearance | 160 mm |
Net weight / load capacity / users / durability
| Single seat position static load capacity | 150 kg | |
|---|---|---|
| Total set net weight (1+1+2 sofas only) | 155 kg | |
| Recommended maximum simultaneous users | 4 people | |
| Upholstery abrasion resistance (Martindale) | ≥30000 cycles | |
| Seat foam compression set | ≤10% | |
| Metal frame rust resistance rating | Grade 9 (neutral salt spray 48h) | |
| Maximum recommended simultaneous occupants | 4 people | |
| Metal component rust resistance | Neutral salt spray 48h, Grade 9 rating | |
| Stitching seam strength | ≥80N tensile force per seam | |
| Seat Foam Density / Rebound | 40 kg/m³ / 60% | |
| Upholstery Abrasion Reference | Fabric 60000 cycles; leather-class cover 1.4 mm | |
| Per-seat Load Reference | 130 kg/seat | |
| Upholstery Seam Pitch | 4 mm | |
| Recommended Procurement Warranty | Frame 10 years; filling 3 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Main seat/back cushion upholstery | Light taupe 1.2mm thick faux leather (PU) with matte finish | |
|---|---|---|
| Side panel upholstery | Brown 1.2mm thick faux leather (PU) with diamond-quilted stitching | |
| Seat cushion core | 40mm thick high-resilience polyurethane foam, density 45kg/m³, 45% rebound rate | |
| Back cushion core | 50mm thick medium-firm polyurethane foam, density 35kg/m³, 40% rebound rate | |
| Internal sofa frame | 20x40mm hardwood plywood frame, 15mm panel thickness, glued and stapled assembly | |
| Sofa support base | Sinuous spring suspension (3.8mm diameter steel springs) spaced 80mm apart | |
| Sofa legs | 1.5mm thick chrome-plated cold-rolled steel, tapered slim profile, with adjustable foot glides | |
| Tea table main frame | 1.2mm thick matte black powder-coated carbon steel square tube frame (20x20mm tubes) | |
| Tea table top surface | 12mm thick white sintered stone slab, polished finish, with embedded stainless steel tea tray and electric kettle cutout | |
| Tea table lower shelf | 8mm thick black tempered glass with matte black edge banding | |
| Upholstery stitching | Polyester bonded thread, 6 stitches per inch seam pitch, quilted diamond pattern on side panels | |
| Primary seat/back cushion upholstery | Light warm grey 1.2±0.1mm thick matte PU faux leather, smooth non-embossed surface | |
| Outer arm/side panel upholstery | Taupe brown 1.2±0.1mm thick matte PU faux leather, diamond-quilted stitching at 50mm grid spacing | |
| Internal sofa structural frame | 20x40mm kiln-dried hardwood plywood (15mm panel thickness, moisture content 12%), glued and stapled assembly | |
| Seat support system | 3.8mm diameter sinuous steel springs spaced 80mm apart, secured with 50mm wide elastic webbing cross-bracing | |
| Coffee table top surface | 12mm thick polished white sintered stone slab, with pre-cut recesses for electric tea kettle and drainage tea tray | |
| Coffee table lower shelf | 8mm thick black tempered glass with matte black edge banding, supported on steel cross rails | |
| Timber Frame Section / Moisture | Primary section ≥30 × 50 mm; recommended moisture 12% |
Adjustment / rotation / tilt / mobility / storage features
| Fixed seating configuration | 1 single armchair left, 2-seater sofa rear, 1 single armchair right, arranged around central tea table for face-to-face reception conversation | |
|---|---|---|
| Integrated tea brewing station | Embedded electric boiling kettle, drainage tray and water supply line routing in tea table top, with open lower shelf space for standard 18.9L bottled water supply | |
| Open lower shelf storage | Tea table lower tempered glass shelf provides accessible storage for tea supplies, waste bins and reception items, no enclosed door panels | |
| Non-adjustable fixed backrest | Pre-contoured back cushions with integrated lumbar support, fixed to frame with no recline or angle adjustment, optimized for upright reception seating posture | |
| Fixed padded armrests | Fully upholstered armrests integrated into sofa frame, no height or angle adjustment, providing consistent arm support for seated users | |
| Floor protection glides | Adjustable plastic glides installed at base of each metal leg, allowing 10mm height adjustment to level units on uneven tile or carpet floors | |
| Fixed seat cushions | Non-removable seat cushions secured to frame with hook-and-loop fasteners, preventing sliding during regular use | |
| Cable management for tea station | Pre-cut routing channel in tea table frame for power cord of electric kettle, preventing cord tangling on reception floor | |
| Fixed reception seating layout | Arranged as 1 left armchair, 1 rear two-seater sofa, 1 right armchair positioned around the central coffee table to support face-to-face guest conversation at 1500 mm conversational distance | |
| Integrated tea service station | Recessed electric boiling kettle, stainless steel drainage tray and pre-routed cable channel in the coffee table top, with open lower shelf clearance for standard 18.9L bottled water supply | |
| Fixed contoured backrest | Pre-shaped back cushions with integrated lumbar support, permanently secured to the sofa frame with no recline, tilt or angle adjustment, optimized for upright short-duration reception seating | |
| Floor leveling glides | Adjustable nylon glides at the base of each sofa and table leg, allowing 10mm vertical height adjustment to level units on uneven tile, carpet or stone office floors | |
| Non-slip fixed seat cushions | Seat cushions secured to the frame base with industrial hook-and-loop fasteners, preventing lateral sliding during seating use, no removable zipper covers visible on primary seating surfaces | |
| Tea station cable management | Pre-cut 30mm diameter routing channel in the coffee table rear frame for the electric kettle power cord, routing cords away from foot traffic areas to prevent tripping hazards |
Verified carton / gross weight / assembly / loading data
| Total number of shipping packages | 6 packages (1 per single armchair, 2 packages for 2-seater sofa, 1 package for tea table frame, 1 package for tea table top/shelf/accessories) | |
|---|---|---|
| Sofa unit (per single armchair) carton dimensions | 980 x 880 x 650 mm | |
| Two-seater sofa carton dimensions (2 packages total) | 1850 x 880 x 500 mm (main frame/cushions), 1200 x 200 x 150 mm (leg/hardware kit) | |
| Tea table carton dimensions | 1350 x 750 x 180 mm (top/shelf/frame), 400 x 200 x 200 mm (tea kettle/accessory kit) | |
| Total set gross shipping weight | 225 kg | |
| Total shipping volume (CBM) for full set | 2.05CBM | |
| On-site assembly time (2 person crew) | 60 minutes | |
| 20ft GP container loading capacity (full sets) | 16 sets | |
| 40ft HQ container loading capacity (full sets) | 36 sets | |
| Reference Package Count | 1 set / 2 cartons |
Recommended spaces / users / usage modes
| Corporate office reception areas | Suitable for front-of-house guest waiting spaces, providing 4-person seating around central tea table for visitor hosting and brief meetings | |
|---|---|---|
| Executive office visitor zones | Appropriate for placement in private executive offices to seat meeting guests, with compact footprint that does not obstruct desk workflow | |
| Tea house and lounge waiting areas | Integrated tea brewing station supports casual tea service for guests in commercial lounge or tea room environments | |
| Mid-range hotel lobby reception zones | Durable faux leather upholstery and stable metal frame withstand high-traffic daily use in hotel public waiting areas | |
| Open-plan office collaborative breakout zones | Informal seating layout supports short impromptu team discussions or casual breaks away from workstations | |
| Recommended color options | 2 standard colorways: two-tone light taupe/brown as shown, optional all-dark grey/black for more formal office environments | |
| Recommended warranty period | 3-year structural frame warranty, 1-year warranty for upholstery, hardware and electric tea set components | |
| Corporate front-of-house reception areas | Suitable for office lobby and main entrance waiting spaces, providing 4-person seating around a central tea service table for visitor hosting, check-in waiting and short introductory meetings | |
| Commercial lounge and tea room waiting areas | Integrated tea service station supports casual beverage service for guests in enterprise tea rooms, staff lounges or client hospitality spaces | |
| Open-plan office breakout zones | Informal seating layout supports short impromptu team discussions, casual breaks or small informal meetings away from formal workstations |
EU Market Access Requirements* EN Standards
| EN 1022:2018 | Furniture - Seating - Determination of stability: applicable for verifying sofa stability under normal seating load conditions | |
|---|---|---|
| EN 12520:2015 | Furniture - Strength, durability and safety - Requirements for domestic seating: reference standard for structural strength and cyclic load testing for commercial reception use | |
| EN 15372:2016 | Furniture - Strength, durability and safety - Requirements for non-domestic tables: applicable for tea table structural strength and load capacity verification | |
| EN 13722:2004 | Furniture - Assessment of surface resistance to cold liquids: applicable for sintered stone tea table top stain resistance verification |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2020 | Lounge and Public Seating: applies to static load, durability and stability testing for public reception sofas | |
|---|---|---|
| ANSI/BIFMA X5.5-2021 | Desk Products: applies to structural load, stability and surface durability testing for the reception tea table |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture: applies to sofa internal frame structural strength, dimensional tolerance and finish quality verification | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture: applies to formaldehyde emission limits for plywood frame components | |
| GB/T 19001-2016 | Quality management systems - Requirements: applicable as supplier production quality system acceptance reference | |
| GB/T 16799-2008 | Furniture: applies to PU faux leather upholstery abrasion resistance, color fastness and tear strength verification | |
| GB 28007-2011 | General technical requirements for children's furniture (reference for edge safety): applies to rounded edge radius requirements for all metal and hard surface components to prevent impact injury |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture: applies to sofa internal frame structural strength, dimensional tolerance and finish quality verification; 2. GB 18584-2001: Indoor decorating and refurbishing materials - Limit of harmful substances of wood based furniture: applies to formaldehyde emission limits for plywood frame components; 3. GB/T 19001-2016: Quality management systems - Requirements: applicable as supplier production quality system acceptance reference; 4. GB/T 16799-2008: Furniture: applies to PU faux leather upholstery abrasion resistance, color fastness and tear strength verification; 5. GB 28007-2011: General technical requirements for children's furniture (reference for edge safety): applies to rounded edge radius requirements for all metal and hard surface components to prevent impact injury; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
