| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall dimensions | 1600 x 900 x 460 mm | |
|---|---|---|
| Tabletop thickness | 40 mm | |
| Angled side support leg cross-section | 50 x 80 mm | |
| Central base column dimensions | 450 x 350 x 420 mm | |
| Floor clearance under side supports | 120 mm | |
| Tabletop overhang past side supports | 80 mm | |
| Support leg wall thickness | 2 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
Net weight / load capacity / users / durability
| Distributed static tabletop load capacity | 136 kg | |
|---|---|---|
| Overall product net weight | 40 kg | |
| Maximum point load on central support area | 68 kg | |
| Floor protection static load per foot | 10 kg | |
| Recommended surface impact resistance | 1.5 J | |
| Surface wear resistance rating | Class 2 | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
Core acceptance fields · Panels / hardware / frame / upholstery
| Tabletop substrate | High-density engineered wood panel | |
|---|---|---|
| Tabletop veneer | Dark walnut tone wood veneer | |
| Support frame finish | Matte dark powder-coated steel | |
| Central base column finish | Satin light gray lacquer | |
| Floor glides | Non-marking nylon foot pads | |
| Connector hardware | Zinc-plated steel bolt fittings | |
| Tabletop edge treatment | Pencil-round polished edge | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support | |
| Reference Finish / Color Count | Recommended 6top finishes and 3frame colors |
Adjustment / rotation / tilt / mobility / storage features
| Central base unit | Closed fixed storage compartment with two horizontal drawer fronts | |
|---|---|---|
| Leveling adjustment | Rotating nylon foot glides for uneven floor alignment | |
| Surface function | Fixed flat top designed for beverage service and decorative display | |
| Floor protection | Non-abrasive glides prevent scratching on hard stone or wood flooring | |
| Cleaning compatibility | Smooth sealed surfaces suitable for damp cloth wiping | |
| Stability design | Wide angled support geometry eliminates wobble on level surfaces | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
Verified carton / gross weight / assembly / loading data
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
Recommended spaces / users / usage modes
| Commercial reception lounge | Positioned centrally between grouped sofas for guest beverage and display use | |
|---|---|---|
| High-end residential living room | Serves as low center table for casual seating areas in luxury homes | |
| Executive office waiting area | Provides stable surface for reading materials and refreshments for waiting guests | |
| Hotel lobby lounge | Suitable for high-traffic public seating zones with durable easy-clean surfaces | |
| VIP meeting breakout space | Supports informal discussion areas with low-profile unobstructed design |
EU Market Access Requirements* EN Standards
| EN 15372:2008 | Furniture – Strength, durability and safety for non-domestic tables, applicable to commercial use load testing | |
|---|---|---|
| EN 12521:2015 | Furniture – Strength, durability and safety for domestic tables, applicable to residential lounge use |
US and Canada office-furniture standards
| ANSI/BIFMA X5.5-2021 | Office Furnishings – Desk Products, applicable for commercial reception area performance testing |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to tabletop structural testing | |
|---|---|---|
| GB/T 4893.8-2013 | Surface wear resistance test method for furniture finishes, applicable to top coating validation | |
| GB 18584-2001 | Indoor decorating and refurbishing materials limit of harmful substances, applicable to wood panel emission testing |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to tabletop structural testing; 2. GB/T 4893.8-2013: Surface wear resistance test method for furniture finishes, applicable to top coating validation; 3. GB 18584-2001: Indoor decorating and refurbishing materials limit of harmful substances, applicable to wood panel emission testing; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
