Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	2300 × 920 × 900 mm
Seat height for all seating units	450 mm
Seat depth for all seating units	660 mm
Armrest height above floor	620 mm
Large coffee table dimensions	900 mm diameter x 450 mm height
Small coffee table dimensions	700 mm diameter x 400 mm height
Metal leg diameter for seating	20 mm
Coffee table base bottom diameter	450 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Total set net weight	280 kg
Per-seat static weight capacity	150 kg
Large coffee table static load capacity	25 kg
Seating frame service life	10 years
Powder-coated metal finish scratch resistance	Grade 3
Recommended maximum occupancy	5 people
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles
Five-star Base Static Load Reference	Acceptance target ≥120 kg; chair reference load 150 kg

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Seating inner frame	Kiln-dried solid hardwood + engineered wood reinforce
Seat and inner back upholstery	1.2mm thick taupe performance faux leather, matte finish
Outer arm and back upholstery	1.2mm thick dark charcoal performance faux leather, matte finish
Cushion core fill	35kg/m³ high-resilience polyurethane foam, 120mm thick
Seating support legs	Matte black powder-coated carbon steel, 1.2mm wall thickness
Coffee tabletops	White faux marble laminated MDF, polished sealed finish
Coffee table bases	Matte black powder-coated carbon steel conical structure, 1.5mm wall thickness
Base accent trim	Polished brass metal ring at tabletop-base junction
Seat cushion backing support	8mm thick plywood webbing support layer
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Seating configuration	Fixed stationary lounge design, no recline or adjustable mechanisms
Coffee table nesting function	Small table slides fully under large table to save floor space
Cushion design	Integrated fixed seat and back cushions with tailored edge stitching
Assembly requirement	Knock-down leg and base attachment with included hex hardware
Surface maintenance	Wipe-clean upholstery and tabletops for daily spill removal
Floor protection	Non-marking plastic glides fitted to all seating leg bases
Stability design	Flared conical table bases and outward-angled seating legs prevent tipping
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential living room layout	Suitable for open-plan living rooms 30m² or larger, arranged in conversational group
Small apartment lounge use	Nested coffee tables reduce footprint for compact urban living spaces
Light luxury interior style matching	Complements modern minimalist, wabi-sabi, and contemporary neutral interior schemes
Casual entertaining use	Seats up to 5 guests for relaxed conversation and refreshment service
Matching rug recommendation	Pairs with low-pile striped or solid neutral area rugs 2400x3400mm minimum
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12520:2015	Furniture - Strength, durability and safety for domestic seating
EN 15372:2016	Furniture - Strength, durability and safety for domestic tables

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to wood frame seating components
GB/T 1952.1-2012	Safety and performance standards for upholstered sofas, applicable to all seating units
GB 18584-2001	Indoor decoration material limit of harmful substances for wooden furniture

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to wood frame seating components;
2. GB/T 1952.1-2012: Safety and performance standards for upholstered sofas, applicable to all seating units;
3. GB 18584-2001: Indoor decoration material limit of harmful substances for wooden furniture;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · LV-SET-311-NT02

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · LV-SET-311-NT02

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · LV-SET-311-NT02Open Export Tool

Quick Actions

Post an RFQ

Product Description

This modern two-tone upholstered 3+1+1 living room seating set with nested round coffee tables delivers a clean, minimalist silhouette suited to curated casual interiors. The seating pieces feature a coordinated two-tone faux leather finish: taupe matte performance faux leather covers seat surfaces and inner back panels, while dark charcoal matte performance faux leather clads outer arms and back panels, accented by tailored edge stitching on fixed, integrated seat and back cushions. The nested coffee tables pair polished sealed white faux marble tabletops with flared conical matte black carbon steel bases, each finished with a polished brass accent ring at the junction of tabletop and base for a subtle light-luxury detail. Outward-angled seating legs and flared table bases support a stable, stationary layout with no recline or adjustment mechanisms.
Built for long-term regular use, the seating frames combine kiln-dried solid hardwood with engineered wood reinforcement, supported by an 8mm plywood webbing layer beneath 120mm thick, 35kg/m³ high-resilience polyurethane foam cushions. Seating units rest on 20mm diameter matte black powder-coated carbon steel legs fitted with non-marking plastic floor glides, while the tables’ thicker 1.5mm wall conical bases match the leg finish for visual cohesion. The set supports a 10-year service life for seating frames, a 150kg static weight capacity per seat, 25kg static load capacity for the large coffee table, and a Grade 3 scratch-resistant powder-coated finish. The smaller coffee table slides fully beneath the larger unit to cut down on unused floor space, and all upholstery and table surfaces wipe clean easily for quick spill removal.
The set accommodates up to 5 people, making it ideal for open-plan residential living rooms of 30m² or larger arranged in conversational groups, as well as compact urban apartments where space-efficient nesting furniture adds functional value. It complements modern minimalist, wabi-sabi, and contemporary neutral interior schemes, pairing best with low-pile striped or solid neutral area rugs of 2400x3400mm minimum size for cohesive layout design. For procurement, note the set ships knock-down with included hex hardware, requiring 40 minutes of assembly time across two cartons. Seating and table dimensions align with standard lounge layout clearances, and the fixed non-adjustable design is intended for stationary placement rather than flexible multi-position use.

Modern Two-Tone Upholstered 3+1+1 Living Room Seating Set with Nested Round Coffee Tables Specifications

Suppliers and stock