Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	2000 × 700 × 800 mm
Seat height (all seating units)	450 mm
Seat depth (all seating units)	550 mm
Armrest height (all seating units)	620 mm
Tapered metal leg height (seating)	150 mm
Backrest height (all seating units)	400 mm
Coffee table lower shelf clearance	120 mm
Three-seater seat cushion width (per seat)	620 mm
Single armchair seat cushion width	600 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Per-seat static load capacity	150 kg
Total set net weight (seating + table)	130 kg
Cushion foam density	45 kg/m³
Cushion foam rebound rate	55%
Seating cushion foam thickness	100 mm
Backrest foam thickness	80 mm
Upholstery abrasion resistance	50000 rub cycles
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Seating outer frame upholstery	Light cream matte PU leather
Seat and back cushion upholstery	Sage green matte PU leather
Seating internal frame	Kiln-dried hardwood + 9 mm multi-layer plywood
Cushion fill	High-density polyurethane foam
Seating support legs	18 mm diameter tapered matte dark gray metal legs
Coffee table top	12 mm thick sintered stone with matte gray finish
Coffee table base	20 mm square matte dark gray metal tube frame with lower shelf
Seat support layer	4 mm elastic webbing + sinuous spring support
Upholstery seam pitch	30 mm
Leg foot pads	Non-slip polyethylene floor glides
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Seating configuration	Fixed static layout with no recline, swivel or tilt mechanisms
Three-seater sofa capacity	3 adults for simultaneous upright seating
Single armchair capacity	1 adult per chair for upright visitor seating
Coffee table serving function	Central placement to serve all 5 seating positions for drinks and documents
Cleaning suitability	Wipe-clean upholstery surface for high-traffic reception spill management
Floor protection	Integrated non-slip glides prevent hard floor scratching during repositioning
Color scheme compatibility	Two-tone cream/sage finish matches modern neutral office interior palettes
Lower table shelf function	Open lower metal shelf for storage of magazines or small reception items
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Office reception lobby use	Suits formal visitor waiting areas with 5-person conversational seating layout
Corporate meeting lounge use	Appropriate for informal small group discussions and client meeting break spaces
Executive office waiting zone use	Fits outside executive suites for pre-meeting visitor seating with coordinated aesthetic
Co-working common area use	Suitable for co-working space casual meeting and break-out zones
Public service waiting area use	Appropriate for bank, government or clinic public waiting spaces with high foot traffic
Small business visitor area use	Fits small offices and startup reception spaces with compact footprint
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 1335-1:2020	Applicable to office furniture seating dimensional stability and safety reference
EN 1022:2018	Applicable to seating stability testing requirements for contract office furniture
EN 12520:2015	Applicable to furniture seating strength, durability and safety requirements
EN 13722:2004	Applicable to domestic and contract furniture table strength and stability requirements

STANDARD S2

North America Purchasing & Inspection Reference * ANSI/BIFMA Standards

US and Canada office-furniture standards

ANSI/BIFMA X5.1-2017	Applicable to general-purpose office seating performance and durability test reference
ANSI/BIFMA X5.5-2021	Applicable to desk/table products performance and durability testing reference
ANSI/BIFMA X7.1-2022	Applicable to furniture VOC emission limits for low-emission office interior products

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	Applicable to general technical requirements for wooden furniture frames used in reception seating
GB/T 16799-2008	Applicable to quality and performance requirements for PU leather upholstery materials
GB/T 19001-2016	Applicable to quality management system requirements for commercial furniture manufacturing
GB 20400-2006	Applicable to leather and fur material harmful substance limit testing for indoor furniture

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: Applicable to general technical requirements for wooden furniture frames used in reception seating;
2. GB/T 16799-2008: Applicable to quality and performance requirements for PU leather upholstery materials;
3. GB/T 19001-2016: Applicable to quality management system requirements for commercial furniture manufacturing;
4. GB 20400-2006: Applicable to leather and fur material harmful substance limit testing for indoor furniture;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · OF-REC-311-METAL-TT25

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · OF-REC-311-METAL-TT25

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · OF-REC-311-METAL-TT25Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Modern Two-Tone Office Reception Seating Set with Coffee Table (model OF-REC-311-METAL-TT25, unbranded) is a coordinated public furniture solution designed for professional visitor-facing spaces. The set includes one three-seater sofa, two single armchairs, and a matching coffee table, arranged in a fixed static layout that supports upright, conversational seating for five adults total, with no recline, swivel, or tilt mechanisms. Visually, the set features a minimalist modern two-tone finish: seating outer frames are upholstered in light cream matte PU leather, while seat and back cushions use sage green matte PU leather, with consistent 30mm seam pitch for a polished, tailored appearance. Tapered matte dark gray metal legs support all seating units, paired with a matching matte dark gray metal tube coffee table base that includes a lower shelf, topped with a matte gray sintered stone surface. The cohesive neutral palette aligns with a wide range of modern office interior design schemes. Construction prioritizes durability for high-traffic use: seating internal frames combine kiln-dried hardwood and 9mm multi-layer plywood, with seat support provided by 4mm elastic webbing and sinuous springs. Cushions are filled with high-density polyurethane foam, with 100mm thick seat foam at 45 kg/m³ density and 55% rebound rate, and 80mm thick backrest foam, delivering consistent support for extended waiting periods. The PU upholstery resists abrasion through 50,000 rub cycles, and its wipe-clean surface simplifies spill management in busy public spaces. Each seating position supports a 150kg static load, with uniform 450mm seat height, 550mm seat depth, 620mm armrest height, and 400mm backrest height across all units. The 150mm tall tapered metal legs lift seating for easy floor cleaning, while integrated non-slip glides prevent scratches to hard flooring during repositioning. The centrally sized coffee table sits within easy reach of all five seats to hold drinks and documents for visitors. The set is well-suited for formal office reception lobbies, corporate meeting lounge break spaces, executive suite waiting zones, co-working common break-out areas, public service waiting spaces including banks, government offices, and clinics, as well as compact small business and startup reception areas. For procurement teams, note the set ships in two cartons per unit, with a 40-minute per-set assembly time, and fits 135 sets in a 20GP container at 85% space utilization for efficient bulk shipping planning. The total net weight of the full set is 130kg. Fixed dimensions include a 2000 x 700 x 780 mm three-seater, 800 x 700 x 800 mm single armchairs, and 1200 x 700 x 500 mm coffee table, requiring advance measurement of target spaces to ensure proper fit.

Modern Two-Tone Office Reception Seating Set with Coffee Table (1 Three-Seater + 2 Single Armchairs) Specifications

Suppliers and stock