Green Upholstered Three-Piece Lounge Seating Set with White Coffee Table (model LNG-GRN-3PC-WT1200) is listed under Faux Leather Sofa. Dimensions: 3200 × 800 × 750 mm. Materials: Green woven textile over padded fixed panels; fabric grade and abrasion data require supplier BOM confirmation. Load capacity: 300 kg. Product Features: modern,style,low-back,lounge,sofa,tub,armchairs,fabric,upholstery,cantilever,metal,base,white,rectangular,coffee,table. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Brand | FENGGUAN | Model | LNG-GRN-3PC-WT1200 |
| Overall dimensions (W × D × H) | 3200 × 800 × 750 mm | Finished Seat Cushion Thickness | 90 mm |
| Backrest Padding Thickness | 70 mm | Lumbar Support Zone Height | 240 mm |
| Clear Width Between Armrests | 540 mm | Total seated capacity | 5 persons |
| Sofa distributed static load | 300 kg | Single armchair static load | 120 kg |
| Coffee table distributed top load | 30 kg | Sofa net weight reference | 58 kg |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | Back Foam Density Reference | 38 kg/m³ |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles | Five-star Base Static Load Reference | Acceptance target ≥120 kg; chair reference load 150 kg |
| Caster Rolling Durability Reference | Acceptance target 30000 cycles | Outer upholstery | Green woven textile over padded fixed panels; fabric grade and abrasion data require supplier BOM confirmation |
| Seat cushioning | High-resilience polyurethane foam at 100 mm seat thickness and 35 kg/m3 density | Back cushioning | Molded polyurethane foam at 80 mm thickness and 30 kg/m3 density |
| Internal seat support | 15 mm hardwood-composite support board over a timber or steel inner frame | Armchair base | 40 x 20 mm rectangular polished stainless or chrome-plated steel cantilever runner |
| Sofa supports | Four 30 mm diameter low-profile metal glides or caster discs, two visible at the front corners | Fixed lounge seating | Non-reclining fixed seat and back with 100-degree relaxed back angle for reception and waiting areas |
| Cantilever chair support | Each chair uses a continuous front-to-back steel runner that provides controlled flex without rotation | Sofa placement and movement | Sofa rests on four small polished glides for short repositioning on smooth floors |
| Coffee table service | Rigid low table provides a central shared surface with four-leg support and twin stretchers | Total consignment volume | 2.11 CBM |
| Reference Package Count | 1 set / 2 cartons | Reference Assembly Time | 40 minutes per set |
| Reference Carton Dimensions | 850× 420× 720 mm | Reference Packaged Gross Weight | 23 kg/set |
| Reference Carton Volume | 0.26 m³/set | Reception and visitor waiting area | Sofa and two enclosed chairs provide five defined seats, while the central table supports magazines, beverages, and visitor devices |
| Office lounge or informal meeting zone | Low 420 mm seat height and shared 420 mm table support short conversations, breaks, and laptop use without formal meeting-room furniture | — | — |
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 3200 × 800 × 750 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Total seated capacity | 5 persons | |
|---|---|---|
| Sofa distributed static load | 300 kg | |
| Single armchair static load | 120 kg | |
| Coffee table distributed top load | 30 kg | |
| Sofa net weight reference | 58 kg | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles | |
| Five-star Base Static Load Reference | Acceptance target ≥120 kg; chair reference load 150 kg | |
| Caster Rolling Durability Reference | Acceptance target 30000 cycles |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer upholstery | Green woven textile over padded fixed panels; fabric grade and abrasion data require supplier BOM confirmation | |
|---|---|---|
| Seat cushioning | High-resilience polyurethane foam at 100 mm seat thickness and 35 kg/m3 density | |
| Back cushioning | Molded polyurethane foam at 80 mm thickness and 30 kg/m3 density | |
| Internal seat support | 15 mm hardwood-composite support board over a timber or steel inner frame | |
| Armchair base | 40 x 20 mm rectangular polished stainless or chrome-plated steel cantilever runner | |
| Sofa supports | Four 30 mm diameter low-profile metal glides or caster discs, two visible at the front corners |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Fixed lounge seating | Non-reclining fixed seat and back with 100-degree relaxed back angle for reception and waiting areas | |
|---|---|---|
| Cantilever chair support | Each chair uses a continuous front-to-back steel runner that provides controlled flex without rotation | |
| Sofa placement and movement | Sofa rests on four small polished glides for short repositioning on smooth floors | |
| Coffee table service | Rigid low table provides a central shared surface with four-leg support and twin stretchers |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Total consignment volume | 2.11 CBM | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Reception and visitor waiting area | Sofa and two enclosed chairs provide five defined seats, while the central table supports magazines, beverages, and visitor devices | |
|---|---|---|
| Office lounge or informal meeting zone | Low 420 mm seat height and shared 420 mm table support short conversations, breaks, and laptop use without formal meeting-room furniture |
EU Market Access Requirements* EN Standards
| Seating strength and durability | EN 16139:2013+A1:2020 Level 2 applicable to non-domestic lounge seating strength, durability, and safety testing | |
|---|---|---|
| Furniture stability | EN 1022:2018 applicable to seated furniture stability evaluation for the cantilever chairs and sofa | |
| Upholstery fabric properties | EN 14465:2003 applicable to upholstery fabric performance, composition, mass per area, and abrasion reporting | |
| Surface flammability option | BS EN 1021:2014 applicable to cigarette ignition resistance when fire-rated fabric and barrier foam are specified |
US and Canada office-furniture standards
| Lounge seating durability | ANSI/BIFMA X2022applicable to lounge seating static load, stability, and durability acceptance tests | |
|---|---|---|
| Vertical static load test | ANSI/BIFMA X2022static load protocol applicable to seat, back, and arm load points on all three seating units | |
| Base and floor protection | Recommended references: ANSI/BIFMA X2022 |
Standards applicable to China-market projects
| Furniture structural safety | GB/T 3324applicable to dimensional accuracy, stability, and wooden furniture construction checks | |
|---|---|---|
| Upholstered furniture durability | GB/T 31943applicable to seating durability and structural test methods for the sofa and chairs | |
| Textile safety | GB 18401Category B applicable to formaldehyde, pH, colorfastness, and harmful substances in contact upholstery |
This product must meet the following technical requirements: 1. Furniture structural safety: GB/T 3324applicable to dimensional accuracy, stability, and wooden furniture construction checks; 2. Upholstered furniture durability: GB/T 31943applicable to seating durability and structural test methods for the sofa and chairs; 3. Textile safety: GB 18401Category B applicable to formaldehyde, pH, colorfastness, and harmful substances in contact upholstery; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp