| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Overall 3-seater sofa dimensions | 2000 x 800 x 820 mm | |
|---|---|---|
| Overall single armchair dimensions | 800 x 780 x 820 mm | |
| Seat height from floor | 420 mm | |
| Seat depth for 3-seater sofa | 620 mm | |
| Seat cushion thickness | 120 mm | |
| Backrest height above seat | 400 mm | |
| Armrest height from floor | 620 mm | |
| Cantilever frame front-to-back span | 700 mm | |
| Armrest width | 80 mm | |
| Single armchair seat depth | 580 mm | |
| Seat width per 3-seater position | 600 mm | |
| Single armchair seat width | 640 mm | |
| Ground clearance under seat | 150 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm |
Net weight / load capacity / users / durability
| Single sofa set net weight | 120 kg | |
|---|---|---|
| 3-seater sofa static seat load capacity | 450 kg | |
| Cantilever frame static load test rating | 300 kg | |
| Recommended maximum users for full set | 5 | |
| Upholstery abrasion resistance reference | 50000 cycles | |
| Foam density seat cushion | 45 kg/m³ | |
| Seam stitch pitch | 8 stitches per 30mm | |
| Upholstery abrasion resistance | 50000 cycles | |
| Seat cushion foam density | 45 kg/m³ | |
| Backrest foam density | 30 kg/m³ |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seat and back upholstery | Brown polyurethane faux leather, 1.2mm thickness | |
|---|---|---|
| Seat cushion core | High-density polyurethane foam, 120mm thickness | |
| Backrest cushion core | Medium-density polyurethane foam, 80mm thickness | |
| Structural frame | 1.5mm thick chrome-plated cold-rolled steel cantilever frame | |
| Armrest padding | 30mm thick foam wrapped under matching faux leather | |
| Frame foot pads | Non-slip polyethylene floor protection pads | |
| Internal support board | 12mm thick plywood under seat cushion | |
| Surface finish on frame | Mirror polished chrome plating, 0.08mm plating thickness | |
| Internal seat support | 12mm thick multilayer plywood under seat cushion | |
| Suspension support | 50mm wide elastic webbing spaced 100mm apart under seat foam | |
| Back panel substrate | 8mm thick hardboard wrapped in matching faux leather | |
| Joint hardware | Zinc-plated steel bolt and nut assembly for KD frame connections |
Adjustment / rotation / tilt / mobility / storage features
| Cantilever frame design | Continuous tubular steel frame without separate rear legs, provides gentle flex under seated load for comfort | |
|---|---|---|
| Fixed non-reclining backrest | Upright fixed angle of 105 degrees from seat, optimized for formal guest seating without adjustment mechanisms | |
| Integrated padded armrests | Fixed height armrests on both sides of each seating unit, provide forearm support for seated users | |
| Fixed floor placement | No casters or swivel mechanisms, stationary placement designed for static reception area layouts | |
| Fully upholstered rear panel | Back of all seating units finished with matching upholstery, allows open placement without rear wall alignment | |
| Modular set configuration | Consists of 1 three-seater sofa and 2 matching single armchairs, arranged in symmetrical formal reception layout | |
| Stain-resistant upholstery surface | Smooth non-porous faux leather surface, supports wiping and cleaning with standard office cleaning agents | |
| Cantilever flex design | Continuous 25mm diameter tubular steel frame without separate rear legs, provides 12mm vertical flex under 100kg seated load for comfort | |
| Fixed backrest positioning | Upright fixed angle of 105 degrees from seat, optimized for formal guest seating without recline or adjustment mechanisms | |
| Fixed-height armrests | Integrated padded armrests on both sides of each seating unit, maintain 200mm height above seat for consistent forearm support | |
| Stationary floor placement | No casters or swivel mechanisms, polyethylene foot pads grip hard flooring to prevent unintended movement | |
| Fully finished rear surface | Back of all seating units upholstered in matching brown faux leather, allows open placement away from walls without exposed unfinished substrates |
Verified carton / gross weight / assembly / loading data
| Number of shipping cartons | 3 | |
|---|---|---|
| 3-seater sofa carton dimensions | 2050 x 850 x 650 mm | |
| Single armchair carton dimensions | 850 x 830 x 600 mm | |
| Total shipment gross weight | 145 kg | |
| Total shipment CBM | 2.21 | |
| On-site assembly time | 60 minutes | |
| 40HQ container loading quantity | 42 sets | |
| Total shipment volume | 2.21 CBM | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
Recommended spaces / users / usage modes
| Corporate executive reception areas | Formal symmetrical design suitable for hosting visiting clients and guests in main office reception zones | |
|---|---|---|
| Executive office visitor seating | Single chairs and 3-seater can be placed opposite executive desks for small meetings or visitor waiting | |
| Waiting areas for professional service firms | Durable easy-to-clean upholstery suitable for law firms, financial offices and consulting practices with high visitor traffic | |
| Small business lounge zones | Compact profile fits in small office lounges without excessive footprint, provides comfortable seating for short waiting periods | |
| Government and institutional meeting rooms | Neutral brown finish and sturdy frame design fits formal public sector and institutional meeting space requirements | |
| Professional service firm waiting areas | Durable easy-to-clean upholstery suitable for law firms, financial offices and consulting practices with 20+ daily visitor traffic, resists scuffs from briefcases and bags | |
| Institutional meeting anterooms | Neutral brown finish and sturdy cantilever frame design fits formal public sector and institutional meeting space anterooms, matches government office formal furnishing standards | |
| Employee break area quiet seating | Low-maintenance upholstery and stable structure supports casual short-break seating in open office break zones, resists wear from daily employee use |
EU Market Access Requirements* EN Standards
| EN 16139 | 2013 Furniture - Strength, durability and safety requirements for non-domestic seating, applicable to commercial reception seating load and stability testing | |
|---|---|---|
| EN 1022 | 2018 Domestic furniture - Seating - Determination of stability, applicable to cantilever frame tipping resistance verification |
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.4 Public and Lounge Seating |
|---|
Standards applicable to China-market projects
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
