| Submitted | Field | Original | Note / Status | |
|---|---|---|---|---|
No corrections yet. Use the flag at the end of a row to report an issue. | ||||
Automatic mm / inch conversion · Core engineering specifications
| Three-seat sofa overall dimensions | 2100mm W × 850mm D × 780mm H | |
|---|---|---|
| Single armchair overall dimensions | 880mm W × 820mm D × 780mm H | |
| Central coffee table overall dimensions | 1300mm W × 700mm D × 440mm H | |
| Side table (each) overall dimensions | 500mm W × 500mm D × 520mm H | |
| Seat height (all seating units) | 440mm | |
| Seat depth (all seating units) | 560mm | |
| Backrest height (seat cushion to top of back) | 420mm | |
| Armrest height (floor to top of armrest) | 620mm | |
| Coffee table drawer unit dimensions | 400mm W × 350mm D × 280mm H | |
| Seating leg height (floor to base of seat frame) | 150mm | |
| Clearance under seating units (leg to floor) | 120mm | |
| Armrest width (padded top surface) | 120mm | |
| Seat cushion thickness | 130mm | |
| Backrest cushion thickness | 90mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
Net weight / load capacity / users / durability
| Total set net weight range | 300 kg | |
|---|---|---|
| Coffee table top static load capacity | 50kg evenly distributed | |
| Seating capacity (total for set) | 5 people | |
| Upholstery abrasion resistance (Martindale double rubs) | 50000 double rubs | |
| Foam compression set resistance | ≤10% after 40,000 compression cycles | |
| Recommended commercial warranty period | 5 years | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles | |
| Five-star Base Static Load Reference | Acceptance target ≥120 kg; chair reference load 150 kg | |
| Caster Rolling Durability Reference | Acceptance target 30000 cycles | |
| Gas-lift Cycling Reference | Acceptance target 100000 cycles | |
| Upholstery Seam Pitch | 4 mm | |
| Recommended Procurement Warranty | Frame 5 years; mechanism/gas lift 3 years; upholstery 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
| Seating upholstery | 1.4 mm thick dark grey corrected grain PU leather or top-grain split leather, water/stain/scratch resistant surface | |
|---|---|---|
| Seat cushion filling | 120mm thick D35 high-density polyurethane foam top layer, 20mm thick D28 soft foam underlayer, supported by 80mm wide sinuous steel springs and elastic webbing | |
| Backrest cushion filling | 80mm thick D28 high-density polyurethane foam with polyester fiber wrap for soft back support | |
| Seating inner frame | 30mm thick kiln-dried solid hardwood + 18mm thick multi-layer plywood structural frame, glued and screwed for joint stability | |
| Armrest outer trim | 0.6mm thick walnut wood grain veneer over 12mm MDF substrate, polished matte finish | |
| Seating legs | 1.5mm thick brushed 304 stainless steel angled tapered legs, polished silver finish, fitted with non-marking plastic floor glides | |
| Coffee/side table tops | 25mm thick wood grain melamine laminate particleboard core, matte scratch-resistant finish, matching wood veneer trim on seating | |
| Coffee table legs and frame | 2.0mm thick brushed stainless steel V-shaped support frame, matte silver finish, welded joints with powder coated internal support brackets | |
| Coffee table drawer unit | 18mm thick grey matte lacquer MDF drawer fronts, fitted with soft-close full extension drawer slides, 2 equal-sized drawers | |
| Stitching details | Matching dark grey bonded polyester thread, 8 stitches per 50mm seam pitch, reinforced stress points at arm and cushion edges | |
| Floor protection glides | 5mm thick nylon non-marking glides fitted to all furniture legs to prevent hard floor scratching | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel | |
| Five-star Base Material Thickness | Metal base wall 3.5 mm; diameter 700 mm | |
| Caster Engineering Specification | 5 PU-tread swivel casters, 60 mm diameter | |
| Reference Color Count | Recommended 5upholstery colors and 2base finishes |
Adjustment / rotation / tilt / mobility / storage features
| Seating configuration | Fixed symmetrical 1+1+3 layout: 2 single armchairs positioned opposite each other flanking 1 central three-seat sofa, arranged for face-to-face guest meetings | |
|---|---|---|
| Coffee table storage | 2 soft-close drawers integrated into the central support unit of the coffee table, sized for storage of reception supplies, coasters and small meeting materials | |
| Cushion design | Fixed (non-removable, non-reclining) seat and back cushions, secured to frame to prevent shifting during high-traffic use, no recline or tilt mechanism | |
| Table coordination | 2 matching square side tables positioned between each armchair and three-seat sofa, designed to hold beverages, small plants or personal items for seated guests | |
| Floor clearance design | 120mm minimum clearance under all seating and table units to allow access for standard commercial vacuum cleaners and floor cleaning equipment | |
| Surface performance | All upholstery and tabletop surfaces are stain and water resistant, allowing wipe-clean maintenance for daily reception area use | |
| Hardware corrosion resistance | All metal leg and frame components are treated with anti-rust coating suitable for indoor commercial environments with standard humidity levels | |
| Leveling adjustment | Each leg is fitted with a 10mm adjustable height glide to compensate for uneven flooring and ensure stable placement on hard commercial floors | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
Verified carton / gross weight / assembly / loading data
| Packaging carton count | 6 cartons total | |
|---|---|---|
| Individual carton dimensions range | Three-seat sofa carton: 2150×900×650mm; Armchair carton (each): 920×860×650mm; Coffee table carton: 1350×750×220mm; Side table carton: 550×550×150mm | |
| Total shipment gross weight range | 330 kg | |
| Total shipment volume range | 3.6CBM | |
| On-site assembly time range | 60 minutes for 2 people with included hex key and hardware | |
| 20ft container loading capacity | 22complete sets | |
| 40HQ container loading capacity | 50complete sets | |
| Packaging protection | Standard export corrugated cartons with 50mm thick EPE foam corner protection, plastic wrap for upholstered components to prevent dust and scuffing, hardware kit labeled per component | |
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set |
Recommended spaces / users / usage modes
| Executive office reception areas | Formal symmetrical layout for hosting VIP guests, client meetings and visitor waiting in corporate executive floors; formal dark grey and wood-metal finish matches premium corporate interior design | |
|---|---|---|
| Corporate boardroom anterooms | Scaled to fit outside meeting rooms for pre-meeting guest seating and waiting, with central coffee table for document and beverage placement | |
| Business lounge areas | Suitable for shared executive lounge spaces in office towers and coworking facilities, with durable easy-clean surfaces for high daily traffic | |
| Government/official meeting guest areas | Conservative professional styling meets requirements for formal official meeting room waiting spaces, with coordinated matching tables for cohesive layout | |
| High-end hotel business centers | Durable commercial construction and premium finish suitable for hotel business center reception and guest waiting zones, matching modern luxury hotel interior palettes | |
| Recommended matching layout | Position the three-seat sofa against a feature wall, place two armchairs 1500 mm opposite across the central coffee table, and set side tables 100mm from the gap between sofa and armrests for unobstructed guest movement | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
EU Market Access Requirements* EN Standards
| EN 13761:2003 Office furniture - Visitor chairs | Applies to structural stability, strength and durability requirements for visitor/guest seating used in office environments, suitable for acceptance of static load and cyclic durability testing | |
|---|---|---|
| EN 15372:2016 Furniture - Strength, durability and safety - Requirements for non-domestic tables | Applies to structural strength, stability and load requirements for coffee tables and side tables used in commercial public areas | |
| EN 1022:2019 Furniture - Seating - Determination of stability | Relevant test standard for verifying seating stability for multi-seat sofas and single armchairs to prevent tipping during use | |
| EN 13501-1:2018 Fire classification of construction products and building elements | Applies to upholstery materials requiring Class B-s1,d0 fire rating for public area commercial furniture |
US and Canada office-furniture standards
| ANSI/BIFMA X5.4-2021 Lounge and Public Seating | Defines minimum strength, durability, stability and dimensional requirements for commercial lounge seating suitable for office reception areas; recommended as third-party acceptance test standard for seating components | |
|---|---|---|
| ANSI/BIFMA X5.5-2021 Desk/Table Products | Defines strength, durability and stability requirements for occasional tables used in commercial environments; recommended as third-party acceptance test standard for coffee and side tables | |
| Static load capacity per seat | 150kg per seating position |
Standards applicable to China-market projects
| GB/T 3324-2017 General technical requirements for wooden furniture | Applies to wood veneer arm trim, wood-based tabletop and drawer components, requiring dimensional stability, edge bonding strength and surface finish quality checks for acceptance | |
|---|---|---|
| GB/T 19001-2016 Quality management systems requirements | Applicable as supplier quality system requirement for consistent production of commercial furniture batches | |
| GB 20400-2006 Leather and fur - Limit of harmful matter | Applies to leather/PU upholstery materials, setting limits for formaldehyde, heavy metals and harmful azo dyes for indoor use | |
| GB/T 27904-2011 Upholstered furniture - Classification and marking of burning characteristics | Applies to upholstered seating components, defining fire resistance classification for public area furniture | |
| GB 18580-2017 Indoor decorating and refurbishing materials - Limit of formaldehyde emission from wood-based panels | Applies to all wood-based panel components (plywood, MDF, particleboard) requiring E0 grade formaldehyde emission ≤0.05mg/m³ for indoor commercial use |
This product must meet the following technical requirements: 1. GB/T 3324-2017 General technical requirements for wooden furniture: Applies to wood veneer arm trim, wood-based tabletop and drawer components, requiring dimensional stability, edge bonding strength and surface finish quality checks for acceptance; 2. GB/T 19001-2016 Quality management systems requirements: Applicable as supplier quality system requirement for consistent production of commercial furniture batches; 3. GB 20400-2006 Leather and fur - Limit of harmful matter: Applies to leather/PU upholstery materials, setting limits for formaldehyde, heavy metals and harmful azo dyes for indoor use; 4. GB/T 27904-2011 Upholstered furniture - Classification and marking of burning characteristics: Applies to upholstered seating components, defining fire resistance classification for public area furniture; 5. GB 18580-2017 Indoor decorating and refurbishing materials - Limit of formaldehyde emission from wood-based panels: Applies to all wood-based panel components (plywood, MDF, particleboard) requiring E0 grade formaldehyde emission ≤0.05mg/m³ for indoor commercial use; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
