Product supplierContemporary Light Taupe Upholstered 3-Piece Living Room Sofa Set (1 Three-Seater + 2 Armchairs), Solid kiln-dried hardwood + 12mm thick plywood reinforcement
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 2950 × 980 × 900 mm | |
|---|---|---|
| Standard seat height (all units) | 450 mm | |
| Seat depth (all seating positions) | 600 mm | |
| Armrest height above floor | 630 mm | |
| Back cushion height above seat | 450 mm | |
| Leg height (all units) | 150 mm | |
| Total set footprint (arranged around coffee table) | 3900 x 3200 mm | |
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Total set net weight | 180 kg | |
|---|---|---|
| Load capacity per seating position | 120 kg | |
| Total set seating capacity | 5 persons | |
| Seat foam density | 45 kg/m³ | |
| Seat foam rebound rate | 60% | |
| Upholstery abrasion resistance | 30000 rub cycles | |
| Limited residential warranty period | 3 years | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% | |
| Back Foam Density Reference | 38 kg/m³ | |
| Upholstery Thickness / Abrasion Reference | 1.4 mm / 50000 cycles |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Inner load-bearing frame | Solid kiln-dried hardwood + 12mm thick plywood reinforcement | |
|---|---|---|
| Main seating surface upholstery | Woven light taupe technical fabric with soft matte finish | |
| Rear arm panel upholstery | Caramel brown faux leather with contrast stitching | |
| Seat cushion filling | 45kg/m³ high-density polyurethane foam wrapped in 20mm soft fiber layer | |
| Back cushion filling | 30mm high-density foam core with 100mm polyester fiber fill | |
| Support legs | 1.2mm thick polished gunmetal gray tapered steel tubes | |
| Back cushion detailing | Single fabric-covered button tuft per back cushion | |
| Seam construction | 10 stitches per 100mm reinforced nylon stitching | |
| Seat Internal Support Board Thickness | 14 mm bent plywood or equivalent support board | |
| Backrest Internal Frame Thickness | 14 mm bent plywood/composite reinforced frame | |
| Gas-lift Engineering Specification | Recommended Class 4; outer tube 50 mm; stroke 100 mm | |
| Tilt Mechanism Plate Thickness | 2.5 mm cold-rolled steel |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seating configuration | Fixed stationary 1+1+3 layout arranged for face-to-face conversation | |
|---|---|---|
| Cushion design | Loose, removable seat and back cushions for easy cleaning and repositioning | |
| Assembly requirement | Knock-down leg attachment with pre-drilled frame mounts, no complex joinery required | |
| Surface cleaning compatibility | Water-repellent fabric and faux leather surfaces support spot cleaning with mild detergent | |
| Floor clearance design | 150mm open under-seat clearance allows robot vacuum access under all units | |
| Cushion stabilization | Non-slip mesh base on loose cushions prevents sliding during regular use | |
| Customization availability | Upholstery color option changes available for bulk procurement orders | |
| Recline Angle / Lock Reference | 125° with 3suggested lock positions | |
| Tilt Tension User-weight Range | Reference adjustment coverage 120 kg | |
| Height Adjustment Stroke | 100 mm continuous travel | |
| Rotation / Mobility Configuration | 360° swivel with 5-caster multidirectional movement |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization | |
| Indicative 40HQ Loading | 320 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential living room application | Suitable for open-plan family living rooms as primary conversation seating around a coffee table | |
|---|---|---|
| Lobby reception application | Suitable for upscale residential lobbies, boutique hotel lounges and executive reception areas | |
| Matching furniture recommendation | Paired with a 1400 mm long oval coffee table and low-pile area rug for balanced layout | |
| Space size requirement | Recommended for rooms with minimum 16 square meters of open floor area to accommodate full set layout | |
| User group suitability | Ideal for households of 5people, or low-traffic reception areas with up to 5 simultaneous visitors | |
| Design style compatibility | Coordinates with modern minimalist, light luxury and contemporary interior design schemes | |
| Recommended Matching Desk Size | 2.4 m executive desk | |
| Reference Daily Use Duration | 8 hours/day; confirm by ergonomic testing |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 12520:2015 | Applicable to strength, durability and safety requirements for domestic seating furniture | |
|---|---|---|
| EN 1022:2018 | Applicable to stability testing for fully assembled domestic seating units | |
| EN 16139:2013 | Applicable to non-domestic seating strength for reception/lounge use scenarios |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | Applicable to general technical requirements for wooden furniture, covering frame strength and stability for stationary sofas | |
|---|---|---|
| GB 20400-2006 | Applicable to leather/faux leather upholstery material limits for harmful substances including formaldehyde and heavy metals | |
| GB/T 19817-2005 | Applicable to upholstered furniture fabric performance requirements for abrasion and colorfastness | |
| GB 18584-2001 | Applicable to indoor decoration material limits for formaldehyde emission in wood-based furniture components |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: Applicable to general technical requirements for wooden furniture, covering frame strength and stability for stationary sofas; 2. GB 20400-2006: Applicable to leather/faux leather upholstery material limits for harmful substances including formaldehyde and heavy metals; 3. GB/T 19817-2005: Applicable to upholstered furniture fabric performance requirements for abrasion and colorfastness; 4. GB 18584-2001: Applicable to indoor decoration material limits for formaldehyde emission in wood-based furniture components; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool