Product supplierModern Wood-Top Rectangular Coffee Table with Central Gray Drawer Storage and Angled Polished Silver Metal Legs, 18mm thick E1 grade engineered fiberboard
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1200 × 610 × 485 mm | |
|---|---|---|
| Tabletop thickness | 25 mm | |
| Drawer unit dimensions | 400 x 380 x 110 mm | |
| Single drawer internal height | 108 mm | |
| Leg height from floor to tabletop underside | 410 mm | |
| Leg tube section size | 50 x 20 mm | |
| Metal leg wall thickness | 1.5 mm | |
| Open side clearance width (each side of drawer unit) | 400 mm | |
| Floor clearance under drawer unit | 100 mm | |
| Tabletop overhang past leg assembly | 30 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Tabletop distributed static load capacity | 90 kg | |
|---|---|---|
| Product net weight | 34 kg | |
| Recommended maximum number of users for simultaneous use | 4 | |
| Surface scratch resistance (abrasion cycles) | 300 cycles | |
| Drawer slide operational cycle rating | 10000 cycles | |
| Leg joint static load rating per leg | 40 kg | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Life | Acceptance target 80000 cycles | |
| Top Abrasion Reference | Acceptance target ≥4,000 abrasion cycles or finish-system test |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Tabletop substrate | 18mm thick E1 grade engineered fiberboard | |
|---|---|---|
| Tabletop surface finish | Walnut-toned wood grain PU paper laminate | |
| Drawer unit substrate | 15mm thick gray painted MDF | |
| Leg construction | Polished chrome-plated cold-rolled steel tubing | |
| Drawer slides | Side-mounted 350mm full-extension ball-bearing steel slides | |
| Connector hardware | M6 cam lock bolts with steel screw inserts | |
| Foot pads | 8mm thick non-slip polyethylene floor protection pads | |
| Drawer front finish | Matte gray scratch-resistant powder coating | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Central storage configuration | Two stacked horizontal soft-close drawers for concealed small item storage | |
|---|---|---|
| Drawer operation | Full-extension ball-bearing slides allow full drawer access without tipping risk | |
| Open side space use | Two open recessed areas on either side of the drawer unit for display or frequently accessed items | |
| Floor protection function | Non-slip PE foot pads prevent floor scratching and enable minor level adjustment | |
| Surface function | Flat matte laminated tabletop supports drink service, decor placement and casual lounge use | |
| Assembly requirement | Knock-down flat-pack assembly with included hex key and step-by-step instructions | |
| Leg alignment design | Angled splayed leg geometry distributes weight evenly to reduce tipping risk | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Residential living room use | Placed in front of 3-seat sofas for lounge drink and snack service | |
|---|---|---|
| Office reception lounge use | Positioned between guest seating for waiting area beverage and document placement | |
| Executive lounge break area use | Installed in informal meeting spaces for casual discussion and refreshment service | |
| Recommended seating pairing | Matched with 3-seat sofa and two single armchairs for complete lounge set | |
| Surface suitability | Stain-resistant laminate top supports regular cleaning in high-traffic common areas | |
| Placement surface requirement | Suitable for placement on low-pile carpet or hard polished flooring with included foot pads |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 12521:2015 | Furniture - Strength, durability and safety requirements for domestic tables | |
|---|---|---|
| EN 13722:2004 | Furniture - Test methods for the assessment of surface resistance to cold liquids |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to tabletop and drawer components | |
|---|---|---|
| GB 18584-2001 | Indoor decorating and refurbishing materials - limit of harmful substances for wood furniture | |
| GB/T 1732-1993 | Determination of impact resistance of paint films for furniture surface finishes |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to tabletop and drawer components; 2. GB 18584-2001: Indoor decorating and refurbishing materials - limit of harmful substances for wood furniture; 3. GB/T 1732-1993: Determination of impact resistance of paint films for furniture surface finishes; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool