Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	610 × 630 × 960 mm
Overall assembled dimensions	610 x 630 x 960 mm
Seat height from floor	480 mm
Seat usable width	490 mm
Seat usable depth	460 mm
Backrest total height above seat	450 mm
Leg taper angle	8 degrees outward
Brass ferrule height per leg	50 mm
Seat cushion thickness	80 mm
Backrest panel thickness	60 mm
Floor clearance under seat apron	280 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Net weight per chair	7.3 kg
Static weight capacity	120 kg
Seat foam density	40 kg/m³
Foam rebound rate	55%
Recommended daily use duration	4 hours per session
Static leg load rating per leg	40 kg
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³
Upholstery Thickness / Abrasion Reference	1.4 mm / 50000 cycles
Five-star Base Static Load Reference	Acceptance target ≥120 kg; chair reference load 150 kg

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Inner seat and back upholstery	1.0 mm matte faux leather (PU) in cream off-white
Outer back panel upholstery	1.0 mm matte faux leather (PU) in black
Seat cushion core	High-resilience polyurethane foam, 80 mm thick
Backrest support core	12 mm thick engineered plywood frame
Leg construction	Black lacquered solid rubber wood, 35 mm square section
Foot ferrules	Polished brass-plated metal, press-fit over leg ends
Floor contact pads	30 mm diameter non-marking felt glides
Seat seam stitch pitch	3 stitches per cm
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm
Tilt Mechanism Plate Thickness	2.5 mm cold-rolled steel

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Seating function	Fixed upright armless seating for dining table use
Back support function	Curved wrap-around back provides lumbar and mid-back support
Floor protection function	Felt glides under ferrules slide without scratching hard flooring
Assembly requirement	Knock-down leg attachment with included hardware
Stacking capability	Non-stackable fixed construction
Upholstery maintenance	Smooth faux leather surface wipes clean with damp cloth
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Single chair carton dimensions	800 x 650 x 600 mm
Gross weight per packed unit	9 kg
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Residential dining rooms	Pairs with standard 750 mm tall dining tables for 6seat settings
Open-plan kitchen breakfast nooks	Compact armless profile fits small dining spaces without blocking sightlines
Luxury hotel guest room seating	Two-tone light luxury styling coordinates with contemporary hospitality interiors
Restaurant cafe booth perimeter seating	Fixed leg construction offers stable seating for casual dining venues
Home makeup vanity seating	480 mm seat height matches standard vanity table heights for grooming use
Matching configuration	Pair with marble or black glass dining tables for coordinated modern light luxury aesthetic
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12520:2015	Applicable for domestic furniture seating strength, durability and safety requirements
EN 1022:2018	Applicable for seating stability verification for domestic dining chairs
EN 13722:2004	Applicable for upholstered furniture upholstery fabric abrasion resistance verification

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324-2017	Applicable for wooden furniture general technical requirements for structural safety
GB 18584-2001	Applicable for indoor furniture formaldehyde emission limit verification
GB/T 1952.1-2012	Applicable for upholstered furniture seating mechanical performance testing

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324-2017: Applicable for wooden furniture general technical requirements for structural safety;
2. GB 18584-2001: Applicable for indoor furniture formaldehyde emission limit verification;
3. GB/T 1952.1-2012: Applicable for upholstered furniture seating mechanical performance testing;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · DC-TT24-BR01

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · DC-TT24-BR01

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · DC-TT24-BR01Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Two-Tone Armless Upholstered Dining Chair (Model DC-TT24-BR01) is an unbranded contemporary light luxury seating solution defined by clean, streamlined visual design. Its two-tone upholstery pairs cream off-white matte faux leather across the seat and inner back with matching black matte faux leather on the outer back panel, anchored by black lacquered solid rubber wood legs finished with 50mm polished brass-plated foot ferrules. Each leg tapers 8 degrees outward for a refined, balanced silhouette, while tight, uniform 3 stitches per cm seam detailing lends a polished, tailored finish. The fixed armless structure creates an open, unobtrusive profile that avoids visual clutter in arranged layouts. Constructed for consistent daily use, the chair features a solid black-finished wood frame, with 14mm bent plywood internal seat support and 12mm engineered plywood forming the backrest core. The 80mm thick seat cushion uses 40 kg/m³ high-resilience polyurethane foam with a 55% rebound rate, while the curved wrap-around backrest delivers targeted lumbar and mid-back support. Legs have a 35mm square cross-section, fitted with press-fit brass ferrules and 30mm non-marking felt glides that slide smoothly across hard flooring without scratching surfaces. Each chair supports a 120kg static weight capacity, with the smooth faux leather upholstery wiping clean easily with a damp cloth for simple upkeep. The chair ships with knock-down leg attachment and included hardware, requiring assembly on receipt, and features a non-stackable fixed structure. With a 480mm seat height, 490mm usable seat width, and 460mm usable seat depth paired with a 450mm tall backrest, the chair is engineered for upright dining seating, recommended for 4 hours of use per session. It fits seamlessly across residential and commercial spaces: it pairs with standard 750mm tall dining tables for 6-seat residential dining room setups, slots into compact open-plan kitchen breakfast nooks without blocking sightlines, coordinates with contemporary hospitality interiors as luxury hotel guest room seating, offers stable fixed support for restaurant and cafe booth perimeter seating, and matches standard vanity table heights for home makeup grooming use. For coordinated styling, it pairs particularly well with marble or black glass dining tables to align with modern light luxury aesthetics. Procurement teams and buyers should note the chair ships as one set across two cartons, with a 40-minute reference assembly time per set, 7.3kg net weight per individual chair, and 23kg reference packaged gross weight per set. There are no stackable configurations available, so storage planning should account for individual unit footprint, and the armless profile should be confirmed to match target space layout requirements before order placement.

Two-Tone Armless Upholstered Dining Chair with Brass Foot Ferrules Specifications

Suppliers and stock