Product supplierHigh-Back Mesh Ergonomic Office Chair with Headrest, Breathable gray woven mesh tensioned over a contoured plastic frame
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 660 × 660 × 1290 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended user weight capacity | 136 kg | |
|---|---|---|
| Net weight | 18 kg | |
| Static base load rating | 500 kg | |
| Gas lift cycle rating | 100000 cycles | |
| Tilt mechanism cycle rating | 300000 cycles | |
| Caster rolling durability | 100000 cycles | |
| Seat impact durability | 100000 cycles | |
| Recommended user height range | 165 to 190 cm | |
| Color options | 1 color | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Back upholstery | Breathable gray woven mesh tensioned over a contoured plastic frame | |
|---|---|---|
| Seat cushion | Molded foam pad with dark gray woven fabric facing and gray side trim | |
| Outer back frame | Light gray injection-molded polymer frame with integrated side supports | |
| Armrests | Light gray fixed polymer T-arms with flat polymer pads | |
| Headrest | Gray mesh face with light gray polymer surround and vertical support bracket | |
| Lumbar support | Light gray curved polymer lumbar pad mounted at lower back center |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Height adjustment | Pneumatic seat-height lift provides 90 mm travel through the right-side lever, with 360-degree swivel | |
|---|---|---|
| Recline and lock | Synchro-tilt mechanism reclines from 95 to 125 degrees with lock and tension adjustment | |
| Lumbar support | Curved fixed-height lumbar pad applies direct lower-back pressure through the mesh | |
| Headrest support | Independent curved headrest supports the upper neck and rear head zone |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Office workstation use | Suited to individual desk work in open offices, home offices and executive workstations due to high-back, headrest and lumbar support. | |
|---|---|---|
| Commercial seating projects | Suitable for task seating in staff zones and shared computer desks where swivel, mobility and 136 kg user capacity are required. |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 1335-1 office furniture seating dimensions | Use dimensional requirements to validate seat, back and clearance fit | |
|---|---|---|
| EN 1335-2 office seating safety | Applicable standards and test results require confirmation | |
| EN 1335-3 office seating test methods | Apply specified strength, durability and stability test methods to production samples |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.1 office chairs | Use back, seat, base, arm, caster and stability tests for commercial-grade acceptance |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 10357.3 furniture strength and durability | Apply seat and back strength/durability test methods to the loaded chair structure | |
|---|---|---|
| GB/T 10357.2 furniture stability | Verify rearward and sideways stability with the high back and headrest | |
| GB 17927 upholstered furniture safety | Check upholstered seat fabric and foam for applicable safety requirements |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 10357.3 furniture strength and durability: Apply seat and back strength/durability test methods to the loaded chair structure; 2. GB/T 10357.2 furniture stability: Verify rearward and sideways stability with the high back and headrest; 3. GB 17927 upholstered furniture safety: Check upholstered seat fabric and foam for applicable safety requirements; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool