Product supplierBlack Faux Leather High-Back Ergonomic Executive Chair with Headrest, Black faux leather surface over sewn padded panels
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 680 × 680 × 1280 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended user weight capacity | 150 kg | |
|---|---|---|
| Net weight | 21 kg | |
| Static base verification load | 680 kg | |
| Seat impact endurance target | 100000 cycles | |
| Caster rolling durability target | 100000 cycles | |
| Back-rest cyclic load target | 120000 cycles | |
| Gas-lift service class | Class 4 | |
| Recommended user height range | 160 to 190 cm | |
| Warranty target | 5 years | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Seat and back upholstery | Black faux leather surface over sewn padded panels | |
|---|---|---|
| Cushion core | Molded polyurethane foam with an 80 mm seat and 60 mm back profile | |
| Headrest | Curved padded faux-leather cushion on a black support bracket | |
| Back support frame | Black molded polymer back shell with a steel recline linkage | |
| Armrests | Height-adjustable black polymer arm posts with flat padded tops | |
| Seat mechanism | Black steel synchro-tilt plate with side tension and tilt levers |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seat height adjustment | Pneumatic lever adjusts seat height over an 80 mm stroke for desk-height matching | |
|---|---|---|
| Recline system | Synchro-tilt mechanism allows back recline through 18 degrees with proportional seat movement | |
| Tilt lock and tension | Multi-position lock holds selected recline, while the side knob sets 5-level resistance | |
| Headrest support | Independent curved headrest pivots and changes height to support neck and upper head |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Carton dimensions | 720 x 660 x 380 mm | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive office | Suitable for managers and knowledge workers needing high-back support, swivel movement, and desk-height adjustability | |
|---|---|---|
| Open-plan workstation | Suitable for 720 to 760 mm desks where users rotate, recline, and move between tasks |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 1335-1:2020 | Applies to office-chair dimensional safety and structural terminology for contract-furniture procurement | |
|---|---|---|
| EN 1335-2:2018 | Applies to safety requirements for office work chairs; request the supplier-specific compliance report | |
| EN 1335-3:2020 | Applies to office-chair test methods including stability, strength, and durability verification |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.1-2017 | Applies to general-purpose office chairs; validate back, seat, arm, base, caster, and stability tests | |
|---|---|---|
| BIFMA e3-2019 | Applies to furniture sustainability attributes if material content, air quality, and social scores are required |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 10357.2-2013 | Applies to furniture mechanical property testing for chairs and stools; request back, seat, and leg load reports | |
|---|---|---|
| GB/T 3324-2024 | Applies to general technical requirements for wooden furniture where structural panels or board substrates are used | |
| GB 28007-2011 | Applies to children's furniture only if a child-rated version is offered; this adult executive model is not marked as child furniture |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 10357.2-2013: Applies to furniture mechanical property testing for chairs and stools; request back, seat, and leg load reports; 2. GB/T 3324-2024: Applies to general technical requirements for wooden furniture where structural panels or board substrates are used; 3. GB 28007-2011: Applies to children's furniture only if a child-rated version is offered; this adult executive model is not marked as child furniture; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool