Product supplierMesh Swivel Task Chair with Fixed Padded Armrests, Gray flexible mesh over a black molded outer frame
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 640 × 620 × 1040 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended user weight capacity | 136 kg | |
|---|---|---|
| Chair net weight | 14.5 kg | |
| Static seat verification load | 680 kg | |
| Caster rolling durability | 100000 cycles | |
| Gas lift cycle life | 100000 height-adjustment cycles | |
| Seat foam density | 45 kg/m3 | |
| Seat foam rebound | 40% | |
| Fabric abrasion resistance | 50000 Martindale cycles | |
| Back mesh load verification | 136 kg backward static load | |
| Recommended user height range | 160 to 190 cm |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Backrest | Gray flexible mesh over a black molded outer frame | |
|---|---|---|
| Seat cover | Gray woven textile over contoured foam cushion | |
| Cushion core | 80 mm molded polyurethane foam with waterfall front | |
| Armrests | Black rigid polymer T-pads on vertical polymer supports | |
| Inner seat frame | 12 mm plywood or molded composite seat carrier with steel reinforcement | |
| Mechanism | Black steel tilt mechanism with lever control and tension knob |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Height adjustment | Pneumatic seat-height lift provides 100 mm travel through the right-side under-seat lever | |
|---|---|---|
| Recline control | Center-tilt mechanism allows 20 degrees of backward recline with lockable upright position | |
| Tension adjustment | Rotary tension knob adjusts backward resistance for user weight | |
| Swivel mobility | 360-degree swivel seat and five twin-wheel casters enable movement around a workstation |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Open-plan and private offices | Suits desks, workstations and computer seating because it has swivel mobility, 100 mm height travel and a ventilated mesh back | |
|---|---|---|
| Meeting and hot-desk areas | Fixed arms and wipe-clean hard components support shared seating where quick repositioning on casters is required |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 1335-1 applicability | Applicable standards and test results require confirmation | |
|---|---|---|
| EN 1335-2 applicability | Use for office chair safety, stability and structural performance requirements | |
| EN 1335-3 applicability | Use for office chair mechanical test methods and acceptance verification | |
| EN 1022 applicability | Use for determination of chair tipping and stability |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.1 applicability | Use for office chair safety, static load, fatigue and stability acceptance in North American procurement |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 10357.2 applicability | Use for chair mechanical and stability verification during procurement inspection | |
|---|---|---|
| GB/T 10357.3 applicability | Use for chair strength and durability test methods, including back and load testing | |
| GB 18584 applicability | Use for indoor furniture hazardous-substance limits when supplied into the Chinese market |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 10357.2 applicability: Use for chair mechanical and stability verification during procurement inspection; 2. GB/T 10357.3 applicability: Use for chair strength and durability test methods, including back and load testing; 3. GB 18584 applicability: Use for indoor furniture hazardous-substance limits when supplied into the Chinese market; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool