Product supplierMesh Ergonomic Office Chair with Headrest and Adjustable Arms, Blue woven elastic mesh stretched over molded carriers
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 680 × 680 × 1240 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended user weight capacity | 135 kg | |
|---|---|---|
| Net weight range | 17.5 to 21.5 kg; published value 21.5 kg | |
| Backrest recline angle | 122 degrees | |
| Seat-height travel | 90 mm | |
| Recommended user height | 185 cm | |
| Seat static-load verification target | 136 kg | |
| Back fatigue verification target | 120,000 cycles | |
| Caster rolling verification target | 100,000 cycles | |
| Fabric abrasion acceptance target | 50,000 Martindale cycles | |
| Seat Foam Density / Rebound Reference | 45 kg/m³ / 65% |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Back and seat upholstery | Blue woven elastic mesh stretched over molded carriers | |
|---|---|---|
| Headrest upholstery | Blue mesh over a curved padded insert | |
| Seat carrier | Molded light-gray polymer seat pan with integrated side frame | |
| Back frame | Light-gray molded polymer outer frame supporting the mesh panel | |
| Arm supports | Light-gray molded polymer stems with dark-gray padded arm caps | |
| Lift and mechanism | Black steel gas-lift column, black tilt mechanism and visible adjustment lever |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Seat height adjustment | Pneumatic lever provides 90 mm of height travel from 450 to 540 mm | |
|---|---|---|
| Recline function | Synchro-tilt movement to 122 degrees with a rear tension knob | |
| Position lock | Three-position back-angle lock with release through the under-seat control | |
| Headrest support | Curved headrest on twin posts supports rear head and neck alignment |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Gross weight | 23.5 kg | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Open-plan office workstation | Suits 450 to 540 mm desk heights and supports all-day computer work with breathable back and lumbar zones | |
|---|---|---|
| Home office or study | Fits a single user up to 185 cm tall where a compact 680 mm footprint and caster mobility are needed |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 1335-1:2020 applicability | Use for office-work-chair dimensional safety and seated-user fit assessment | |
|---|---|---|
| EN 1335-2:2018 applicability | Use for safety, stability and structural performance acceptance of the task chair | |
| EN 1335-3:2009 applicability | Use for structural and durability test methods during commercial procurement inspection | |
| EN 1021-1:2014 applicability | Use for upholstered-seat ignited-cigarette ignition-resistance testing when fire compliance is required |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.1-2017 applicability | Applicable standards and test results require confirmation | |
|---|---|---|
| ANSI/BIFMA e3-2019 applicability | Use as the framework for requested chemical, material and social-sustainability documentation |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 10357 furniture strength testing | Apply static load, durability and stability test methods appropriate to the seat, back and arm structure | |
|---|---|---|
| GB 17927-2022 applicability | Use as the furniture upholstery and furniture-component fire-performance acceptance reference where required |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 10357 furniture strength testing: Apply static load, durability and stability test methods appropriate to the seat, back and arm structure; 2. GB 17927-2022 applicability: Use as the furniture upholstery and furniture-component fire-performance acceptance reference where required; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool