Product supplierBlack Mesh Ergonomic Executive Task Chair with Headrest, Black flexible woven mesh over a black molded polymer outer frame
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 660 × 660 × 1270 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended user weight capacity | 136 kg | |
|---|---|---|
| Net weight | 15.6 kg | |
| Seat foam density | 45 kg/m3 molded polyurethane | |
| Seat foam thickness | 70 mm | |
| Back mesh load rating | 136 kg static user load | |
| Backrest recline range | 95 to 115 degrees | |
| Caster rolling durability | 100000 cycles | |
| Gas-lift cycles | 100000 height-adjustment cycles | |
| Base static-load rating | 1134 kg | |
| Applicable user height | 1600 to 1900 mm |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Backrest construction | Black flexible woven mesh over a black molded polymer outer frame | |
|---|---|---|
| Seat upholstery | Black woven polyester fabric over polyurethane foam cushion | |
| Headrest construction | Curved mesh-faced padded headrest on black polymer support | |
| Armrests | Fixed black nylon loop armrests with steel or molded rear supports | |
| Lift and mechanism | 50 mm steel gas lift with black painted telescopic sleeve and steel tilt mechanism | |
| Base and casters | Black molded nylon five-star base with five 60 mm twin-wheel casters |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Height adjustment | Pneumatic seat-height adjustment through 100 mm using the right-side paddle lever | |
|---|---|---|
| Recline and lock | Synchro-style back tilt from 95 to 115 degrees with upright lock position | |
| Swivel mobility | 360-degree swivel seat on five twin-wheel casters for carpet or hard-floor movement | |
| Postural support | Contoured mesh back, fixed loop arms and curved headrest provide shoulder, arm and neck support |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Export carton size | 880 x 640 x 360 mm | |
|---|---|---|
| Reference Package Count | 1 set / 2 cartons | |
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Primary workspace | Open offices, executive desks and home workstations requiring 4 to 8 hours of seated task support | |
|---|---|---|
| Procurement configuration | Suitable for individual workstations and bulk office refreshes where black mesh, fixed arms and rolling mobility are required |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| Office chair safety proposal | EN 1335:2020 dimensional and safety requirements for office work chairs | |
|---|---|---|
| Mechanical test proposal | EN 1335:2018 strength, durability and stability test requirements | |
| Surface test proposal | EN 1335:2009 test methods for office chair safety and structural performance |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| Task chair safety proposal | ANSI/BIFMA X2017office chairs strength, durability and stability | |
|---|---|---|
| Low-chemical seating proposal | Recommended references: ANSI/BIFMA e2019 |
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| Office chair safety proposal | GB/T 28004.1:2021 office chair structural safety and stability requirements | |
|---|---|---|
| Formaldehyde emission proposal | GB 18584:2001 indoor wooden-furniture hazardous-material limits | |
| Upholstered furniture proposal | GB/T 3324:2017 general furniture requirements for dimensions, finish and workmanship |
Standardized tender description text
This product must meet the following technical requirements: 1. Office chair safety proposal: GB/T 28004.1:2021 office chair structural safety and stability requirements; 2. Formaldehyde emission proposal: GB 18584:2001 indoor wooden-furniture hazardous-material limits; 3. Upholstered furniture proposal: GB/T 3324:2017 general furniture requirements for dimensions, finish and workmanship; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool