Product supplierPink Mesh Ergonomic Office Chair with Headrest and Retractable Footrest, Pink woven polyester mesh with open breathable weave
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 680 × 660 × 1290 mm | |
|---|---|---|
| Finished Seat Cushion Thickness | 90 mm | |
| Backrest Padding Thickness | 70 mm | |
| Lumbar Support Zone Height | 240 mm | |
| Clear Width Between Armrests | 540 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Recommended user weight capacity | 150 kg | |
|---|---|---|
| Net weight | 21 kg | |
| Seat static-load verification target | 102 kg | |
| Backrest backward static-load target | 136 kg | |
| Caster rolling durability target | 100000 cycles | |
| Gas-lift durability target | 100000 height-adjustment cycles | |
| Seat-slide cycle target | 20000 cycles | |
| Recommended user height range | 190 cm | |
| Suggested daily usage duration | 10 hours | |
| Warranty duration | 5 years frame and 2 years wearable parts |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Back and seat upholstery | Pink woven polyester mesh with open breathable weave | |
|---|---|---|
| Back support frame | Grey glass-fibre-reinforced nylon outer frame with internal Y-shaped support ribs | |
| Seat shell | Grey contoured polymer load shell with waterfall front edge | |
| Seat cushion | High-resilience moulded foam core, 60 mm thick and 45 kg/m3 density target | |
| Lumbar support | Curved mesh-covered lumbar cushion on a height-adjustable central carrier | |
| Arm pads | Soft polyurethane pads, 20 mm thick, on grey polymer support arms |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Height adjustment | Pneumatic seat-height lift provides 80 mm travel through an under-seat lever, covering 540 mm seat height | |
|---|---|---|
| Backrest recline | Synchronized seat-and-back tilt reclines to 135 degrees with 4-position lock and automatic weight-brake setting | |
| Seat-depth adjustment | Forward sliding seat pan provides 50 mm depth travel to fit different thigh lengths | |
| Lumbar support | Height-adjustable lumbar pad travels 60 mm and applies centered support to the lower-back curve |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Carton Dimensions | 850× 420× 720 mm | |
| Reference Packaged Gross Weight | 23 kg/set | |
| Reference Carton Volume | 0.26 m³/set | |
| Indicative 20GP Loading | 135 sets at 85% space utilization |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Primary workplace use | Individual workstation, executive desk or home-office setup for users requiring lumbar, head and recline support during long computer sessions | |
|---|---|---|
| Rest-and-recharge use | Footrest and 135-degree recline support short breaks in private offices, manager rooms or home workspaces |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 1335-1 office chair dimensions | Applies to seat, back, clearance and anthropometric dimensional verification | |
|---|---|---|
| EN 1335-2 office chair safety | Applies to structural safety, stability and caster integrity | |
| EN 1335-3 office chair test methods | Applies to static load, fatigue and rolling test procedures | |
| EN 1022 seating stability | Applies to upright and reclined stability validation |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| ANSI/BIFMA X5.1 office chairs - backrest strength | Applies a 136 kg back static-force acceptance target to the framed back |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 10357.2 furniture mechanical stability | Applies to chair tipping stability on level floors during procurement testing | |
|---|---|---|
| GB/T 10357.3 furniture strength and durability | Applies to seat, back and arm static, impact and fatigue tests | |
| GB 17927 furniture anti-dumping structure | Applies if folding or finger-access structures are present in the footrest mechanism |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 10357.2 furniture mechanical stability: Applies to chair tipping stability on level floors during procurement testing; 2. GB/T 10357.3 furniture strength and durability: Applies to seat, back and arm static, impact and fatigue tests; 3. GB 17927 furniture anti-dumping structure: Applies if folding or finger-access structures are present in the footrest mechanism; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool