Product supplierWalnut Grain Fluted 4-Door Handleless Freestanding Wardrobe with Rounded Frame, Solid hardwood walnut-toned frame with rounded edges
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 2000 × 660 × 2400 mm | |
|---|---|---|
| Overall exterior dimensions | 2000 x 660 x 2400 mm | |
| Integrated plinth base height | 120 mm | |
| Upper door section height | 1280 mm | |
| Lower door section height | 1000 mm | |
| Single door panel width | 500 mm | |
| Internal clear storage depth | 600 mm | |
| Long hanging compartment clear height | 1300 mm | |
| Short hanging/folded storage compartment clear height | 950 mm | |
| Adjustable shelf thickness | 18 mm | |
| Back panel thickness | 9 mm | |
| Rounded frame edge radius | 20 mm | |
| Floor clearance under plinth | 60 mm | |
| Carcass Panel Thickness | 25 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Unit net weight | 260 kg | |
|---|---|---|
| Uniform shelf static load capacity | 30 kg | |
| Maximum door open angle | 110 degrees | |
| Hinge cycle durability | 80000 open/close cycles | |
| Door panel surface abrasion resistance | 2000 cycles | |
| Recommended maximum user load | 150 kg of stored clothing | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer cabinet frame | Solid hardwood walnut-toned frame with rounded edges | |
|---|---|---|
| Door panels | Medium density fiberboard core with vertical fluted walnut veneer | |
| Internal cabinet carcass | 18mm thick E1 grade engineered wood panel | |
| Back panel | 9mm thick engineered wood panel with wood grain finish | |
| Door hardware | Cold rolled steel soft-close concealed hinges with matte finish | |
| Plinth base and support feet | Solid hardwood raised frame with four support feet | |
| Surface finish | Matt PU wood lacquer with scratch-resistant topcoat | |
| Edge banding | 2mm thick matching wood grain PVC edge banding on all cut panel edges | |
| Internal hanging rod | 25mm diameter oval steel tube with powder coated walnut finish | |
| Anti-tip hardware | 2 steel wall anchor brackets included | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Door operation | Push-to-open rebound mechanism for handleless access, no external pulls | |
|---|---|---|
| Hinge damping | Soft-close hydraulic damping prevents slamming and reduces noise | |
| Internal shelving | 4 position adjustable shelves to customize compartment height | |
| Hanging configuration | Dual zone hanging: 1 long hanging section, 1 double short hanging section | |
| Modular compatibility | Aligns with matching open shelving units for extended storage systems | |
| Base stability | Fixed solid wood feet with non-slip pads to protect flooring | |
| Door alignment | Concealed 3D adjustable hinges to fine-tune door gap alignment | |
| Cable / Vent Opening Reference | If fitted, 80 mm diameter |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Primary application space | Residential master or guest bedroom | |
|---|---|---|
| Matching interior style | Modern minimalist, wabi-sabi, new Chinese interior design schemes | |
| Target user group | Households requiring enclosed long-term clothing and linen storage | |
| Recommended installation location | Freestanding placement against flat load-bearing wall | |
| Modular expansion option | Pair with matching open bookcase or display units for extended storage wall | |
| Suitable ceiling height requirement | Minimum 2500mm ceiling clearance for installation and top ventilation |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| Formaldehyde emission for wood panels | EN 312:2010 E1 grade | |
|---|---|---|
| Furniture mechanical safety requirement | EN 14749:2016 | |
| Hardware cycle durability | EN 15570:2008 |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.9 Storage Units |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| Formaldehyde emission limit | GB/T 39600ENF grade | |
|---|---|---|
| Wood furniture general technical requirement | GB/T 3324 | |
| Hardware durability requirement | GB/T 28203 | |
| Surface finish abrasion requirement | GB/T 4893.8 |
Standardized tender description text
This product must meet the following technical requirements: 1. Formaldehyde emission limit: GB/T 39600ENF grade; 2. Wood furniture general technical requirement: GB/T 3324; 3. Hardware durability requirement: GB/T 28203; 4. Surface finish abrasion requirement: GB/T 4893.8; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool