Full Height Mixed Open and Closed Storage Cabinet with Tambour Section and LED Lighting (model STOR-WHT-3000) is listed under Panel-type Filing Cabinet, with overall dimensions of 3000 × 470 × 2400 mm and main material of Particle‑board (PB). Load capacity: 11 kg. Certifications: Mixed,open/closed,storage,curved,edge,detailing,integrated,LED,lighting,sliding,tambour,door,compartment,wall-aligned,full-height,design. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall cabinet dimensions | 3000 x 470 x 2400 mm | |
|---|---|---|
| Top open shelf zone height | 320 mm | |
| Top open shelf dividers | 2 vertical metal dividers, 3 equal compartments | |
| Middle open shelf height | 480 mm | |
| Middle insert storage box dimensions | 700 x 350 x 300 mm each, 3 units total | |
| Tambour door compartment height | 400 mm | |
| Lower cabinet zone height | 880 mm | |
| Lower cabinet door width | 750 mm per door, 4 equal units | |
| Carcass panel thickness | 25 mm | |
| Shelf panel thickness | 18 mm | |
| Edge band thickness | 2 mm | |
| Right-side curved corner radius | 80 mm | |
| LED strip mounting recess depth | 10 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Per open shelf static load capacity | 11 kg | |
|---|---|---|
| Tambour door sliding cycle rating | 50000 cycles | |
| Lower door hinge open angle | 110 degrees | |
| Lower door hinge cycle rating | 80000 cycles | |
| Anti-tip wall anchor load rating | 50 kg per anchor, 2 anchors total | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Cabinet frame and end panels | Walnut veneered MDF with satin polyurethane finish | |
|---|---|---|
| Door and shelf back panels | Matte light taupe lacquered MDF | |
| Tambour door slats | Vertical fluted engineered wood with matching taupe finish | |
| Shelf dividers | Brushed anodized aluminum vertical supports | |
| Integrated lighting | Recessed 3000K warm white LED strip lights | |
| Hardware | Concealed steel hinges, wall-mount anti-tip brackets |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Tambour door operation | Horizontal sliding door retracts into cabinet side for concealed storage | |
|---|---|---|
| Lower cabinet storage | Four hinged doors enclose adjustable interior shelves for concealed bulk storage | |
| Open shelf display | Tiered open upper shelves with integrated accent lighting for decorative display | |
| Insert storage boxes | Three removable closed boxes on middle shelf for small item organization |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Modern office open storage zones | Provides mixed display and concealed storage for files, decor and supplies | |
|---|---|---|
| Residential living room accent walls | Integrated lighting and curved edges suit contemporary interior display needs |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Domestic and kitchen storage units and worktops, safety and performance requirements | |
|---|---|---|
| EN 16121:2013 | Non-domestic storage furniture, strength, durability and stability requirements | |
| EN 13986:2004 | Wood-based panels for construction, performance specifications for cabinet components |
US and Canada office-furniture standards
| ANSI/BIFMA X5.9-2019 | Storage furniture performance standard for office and commercial use | |
|---|---|---|
| ANSI/BIFMA X5.1-2017 | General purpose office furniture safety and durability guidelines |
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable to cabinet structural performance | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit of harmful substances for wooden furniture | |
| GB/T 4893.8-2013 | Furniture surface test for abrasion resistance of finishing coats |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable to cabinet structural performance; 2. GB 18584-2001: Indoor decoration material limit of harmful substances for wooden furniture; 3. GB/T 4893.8-2013: Furniture surface test for abrasion resistance of finishing coats; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp