Product supplierExecutive Combination Bookcase and Display Cabinet, Dark matte engineered frame with rounded vertical posts and top canopy, 50 mm side thickness
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 3200 × 450 × 2200 mm | |
|---|---|---|
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Product net weight | 260 kg | |
|---|---|---|
| Shelf distributed load capacity | 35 kg per shelf level | |
| Glass door panel capacity | 15 kg per door panel | |
| Recommended floor loading | 2.0 kPa | |
| Recommended user capacity | 2 simultaneous users | |
| Hardware cycle target | 50,000 door and drawer operations | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer cabinet frame | Dark matte engineered frame with rounded vertical posts and top canopy, 50 mm side thickness | |
|---|---|---|
| Wood door and drawer fronts | Walnut-tone vertical-grain wood veneer-look panels with edge-bound construction | |
| Interior shelves | 30 mm engineered-wood shelves with walnut-tone surface and dark back panels | |
| Back panel | Dark matte panel backing behind open shelves and glazed section | |
| Sliding doors | Two smoky translucent glass panels in a dark metal or framed track system | |
| Door tracks | Top and bottom metal sliding tracks with recessed channels | |
| Door pulls | Two vertical dark central handles mounted on the sliding doors | |
| Drawer runners | Side-mounted full-extension metal drawer runners with soft-close target | |
| Pedestal shell | Dark framed carcass around three walnut-tone drawer fronts | |
| Plinth and base trim | Continuous dark recessed plinth with protective floor-level trim | |
| LED lighting strip | Linear LED channel installed beneath the top canopy inside the glazed cabinet | |
| Fasteners and connectors | Cam-lock, screw, and bracket fastening system for knock-down assembly |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Sliding glass doors | Two panels slide horizontally on top and bottom tracks, giving access without outward door swing | |
|---|---|---|
| Enclosed display zone | Upper glazed compartment protects decorative items and books while preserving visibility | |
| Concealed lower storage | Two vertical wood doors conceal files, samples, or office materials behind a 900 mm lower section | |
| Open book storage | Five horizontal shelf levels provide immediate access to books, binders, and decorative objects | |
| Integrated drawer pedestal | Three stacked drawers provide separated storage for documents, stationery, and personal office items | |
| LED object lighting | Canopy-mounted linear LED illuminates the upper display area and is specified at 4000 K neutral white | |
| Flexible shelf layout | Open shelves accept binders up to 320 mm spine height and adjustable shelf-pin layout where supplied | |
| Soft-close storage | Drawer runners and lower doors are specified with soft-close damping to reduce closing impact | |
| Cable or lighting route | Internal rear channel allows LED wiring to exit through the back or top frame with concealed routing | |
| Cable / Vent Opening Reference | If fitted, 80 mm diameter |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive office | Placed behind or beside a managerial desk for books, awards, corporate gifts, and confidential files | |
|---|---|---|
| Boardroom or meeting suite | Used as a presentation wall for reference materials, displays, and meeting supplies | |
| President or director workspace | Provides a high-back visual boundary and organized storage in a 3200 mm wide office zone | |
| Reception waiting area | Displays company publications and decorative objects while concealing operational items | |
| Professional consulting room | Stores binders and samples on open shelves with lockable lower storage specified where needed | |
| Hotel or club business lounge | Functions as a room-dividing display and storage element in upscale interiors |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
No standards data is available for this market.
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.9 Storage Units |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
No standards data is available for this market.
Standardized tender description text
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool