Large Modular Office Storage Wall Cabinet with Integrated LED Lighting (model OF-SW-4800W-2200H-MOD) is listed under Panel-type Filing Cabinet, with overall dimensions of 4800 × 400 × 2200 mm and main material of Particle‑board (PB). Load capacity: 40 kg. Certifications: Modular,wall-mounted/standing,storage,mixed,open/closed,two-tone,walnut/light,gray,finish,integrated,LED,accent,lighting. This page consolidates 6 groups of specifications and GB / EN / ANSI/BIFMA standard references, with metric and imperial units. 1 supplier(s) are listed and you can request a quote online.
| Time | Field | Original Value | Corrected Value | Note / Status |
|---|---|---|---|---|
No correction records yet. Found an error? Click the flag at the end of a row to report it. | ||||
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Carcass Panel Thickness | 25 mm | |
|---|---|---|
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Single shelf static load capacity | 40 kg | |
|---|---|---|
| Total unit static storage capacity | 350 kg | |
| LED strip service life | 30000 hours | |
| Assembled unit net weight | 320 kg | |
| Anti-tip anchoring load rating | 100 kg pull force | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Cabinet carcass and primary shelves | 18mm thick E1 grade melamine-faced particle board, walnut wood grain finish | |
|---|---|---|
| Closed door panels (light gray) | 18mm thick MDF with matte light gray PU lacquer finish | |
| Fluted decorative back panels | 15mm thick MDF with vertical fluted walnut veneer finish | |
| Shelf edge banding | 2mm thick PVC edge banding matching walnut finish | |
| Integrated accent lighting | 12V 3000K warm white LED strip lights, recessed under shelf fronts | |
| Hardware components | Soft-close cabinet hinges, metal sliding door tracks, wall anti-tip brackets |
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Central sliding door operation | Two sliding panels glide horizontally on metal tracks to conceal or access middle storage compartments | |
|---|---|---|
| Integrated LED lighting | Recessed warm white strips illuminate open display shelves to highlight stored items and decor | |
| Mixed storage configuration | Combines open display shelves, small closed cubbies, and full-width lower closed cabinets for flexible document and supply storage | |
| Modular assembly design | Pre-drilled flat-pack panel system allows on-site assembly and wall anchoring for stability |
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive office backdrop | Installed behind executive desks to store files, decor, and office supplies while providing a polished professional backdrop | |
|---|---|---|
| Open office reception storage | Used in reception areas to display company materials and store operational supplies out of sight |
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Safety and performance requirements for domestic and kitchen storage units, applicable for structural stability | |
|---|---|---|
| EN 13986:2004+A1:2015 | Performance specifications for wood-based panels used in furniture construction |
US and Canada office-furniture standards
| North America procurement and testing reference | Recommended references: ANSI/BIFMA X5.9 |
|---|
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for panel dimensional tolerance and edge quality inspection | |
|---|---|---|
| GB 18580-2017 | Formaldehyde emission limits for wood-based panels, required for indoor office air quality compliance | |
| GB/T 10357.5-2011 | Furniture mechanical performance test for storage units, applicable for shelf and structure load verification |
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for panel dimensional tolerance and edge quality inspection; 2. GB 18580-2017: Formaldehyde emission limits for wood-based panels, required for indoor office air quality compliance; 3. GB/T 10357.5-2011: Furniture mechanical performance test for storage units, applicable for shelf and structure load verification; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
Export data is generated from the current published product record.
Directly download an English report in metric or imperial units.
Download all product information and parameter modules in English.
English title, specifications, materials, standards and purchasing fields.
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool
Admin WhatsApp