Primary source
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 1000 × 380 × 2100 mm | |
|---|---|---|
| Tapered leg height | 120 mm | |
| Central cabinet door size (single) | 400 x 600 mm | |
| Large open cubby internal height (lower right) | 420 mm | |
| Book shelf clear height (middle left) | 260 mm | |
| Display shelf clear height (upper tiers) | 320 mm | |
| Open shelf board thickness | 18 mm | |
| Outer frame member thickness | 35 mm | |
| Base plinth height | 80 mm | |
| Quatrefoil decorative frame outer width | 780 mm | |
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| Total unit static load capacity | 90 kg | |
|---|---|---|
| Product net weight | 90 kg | |
| Hinge open/close cycle rating | 50000 cycles | |
| Door pull static load rating | 50 N | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points | |
| Recommended Procurement Warranty | Carcass 5 years; hardware 3 years; finish 2 years |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Main structural frame | Solid hardwood with light walnut wood finish | |
|---|---|---|
| Open shelf panels | 18mm thick solid wood panels with rounded edge detailing | |
| Central cabinet doors | Solid wood frame with vertical wooden slat grille inserts | |
| Back panel | 9mm thick plywood back panel with matching wood veneer | |
| Decorative quatrefoil frame | Bent solid wood molding with smooth rounded edges | |
| Cabinet base and legs | Solid hardwood tapered legs with floor protection pads | |
| Door hardware pulls | Small solid brass-toned metal minimalist pulls | |
| Door hinges | Concealed metal cabinet hinges with 95 degree opening angle | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints | |
| Reference Finish / Color Count | Recommended 6finish options |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Asymmetrical open display shelving | Mixed size open cubbies across left and right sections for decor display | |
|---|---|---|
| Central enclosed slatted door storage | Two hinged doors conceal hidden storage compartment behind grille fronts | |
| Elevated leg design | Short tapered legs lift cabinet 120mm off floor for floor cleaning access | |
| Fixed shelf configuration | All open shelves are permanently fixed for stable display of heavy ceramics | |
| Ventilated door design | Vertical slat grille doors allow air circulation for stored collectibles | |
| Wall anti-tip anchoring | Pre-drilled anti-tip connector points for wall attachment to prevent tipping | |
| Cable / Vent Opening Reference | If fitted, 80 mm diameter |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Home living room display | Place against feature wall for displaying ceramic art, decorative plates and collectibles | |
|---|---|---|
| Tea room storage and display | Store and display tea sets, tea caddies and tea ceremony accessories | |
| Study/office book and decor storage | Position adjacent to desk for book storage and scholarly ornament display | |
| Entryway accent furnishing | Use as decorative entry storage for small decor and household items | |
| Hospitality lounge decor | Install in Chinese style restaurants or lounge areas for cultural artifact display |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
| EN 14749:2016 | Domestic and kitchen storage units and worktops safety requirements for tall cabinets | |
|---|---|---|
| EN 12521:2015 | Furniture strength durability safety for domestic seating and storage units |
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.9 Storage Units |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
| GB/T 3324-2017 | General technical requirements for wooden furniture, applicable for structural performance verification | |
|---|---|---|
| GB 18584-2001 | Indoor decoration material limit of harmful substances for wooden furniture | |
| GB/T 4893.8-2013 | Furniture surface test for abrasion resistance of wood finishes |
Standardized tender description text
This product must meet the following technical requirements: 1. GB/T 3324-2017: General technical requirements for wooden furniture, applicable for structural performance verification; 2. GB 18584-2001: Indoor decoration material limit of harmful substances for wooden furniture; 3. GB/T 4893.8-2013: Furniture surface test for abrasion resistance of wood finishes; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool