Product supplierDark Wood Veneer Executive Wall Bookcase and Storage Cabinet, Dark wood-grain engineered board with straight veneer-matched faces
Contact the supplier for production scheduling and quotation.
PRODUCT MODULE 01 / 06
Physical Dimensions
Automatic mm / inch conversion · Core engineering specifications
Data source: Structured from factory data; final measured values prevail.
| Overall dimensions (W × D × H) | 2400 × 450 × 2200 mm | |
|---|---|---|
| Carcass Panel Thickness | 25 mm | |
| Back Panel Thickness | 9 mm | |
| Door / Drawer Front Thickness | 22 mm | |
| Shelf Thickness | 25 mm |
PRODUCT MODULE 02 / 06
Weight, Load & Performance
Net weight / load capacity / users / durability
Data source: Product performance data; verify exact test conditions before procurement.
| net weight | 185 kg | |
|---|---|---|
| Shelf distributed load capacity | 25 kg per shelf | |
| Recommended wall anchoring load | 60 kg lateral restraint | |
| Recommended users | 1 to 3 users | |
| Durability target | 50,000 drawer cycles | |
| Door hinge cycle target | 80,000 opening cycles | |
| Shelf Distributed Load | 30 kg/shelf | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles | |
| Hinge Opening Angle / Life | 165°; 80000 cycles | |
| Anti-tip Fixing Reference | Products above 1200 mm should use at least 2 wall fixing points |
PRODUCT MODULE 03 / 06
Materials & Structure
Core acceptance fields · Panels / hardware / frame / upholstery
Data source: Subject to the factory material list and inspection report.
| Outer vertical side panels | Dark wood-grain engineered board with straight veneer-matched faces | |
|---|---|---|
| Back panel | Charcoal matte engineered-board backing with smooth non-reflective surface | |
| Horizontal shelves | Dark laminate or veneered engineered board with 30 mm finished front edge | |
| Lower door fronts | Flat dark wood-grain panel with flush reveal gaps and push-look face | |
| Center drawer fronts | Three matching wood-grain engineered-board panels with narrow shadow reveals | |
| Carcass boards | 18 mm thick engineered board proposed for structural sides, partitions, and cabinet boxes | |
| Visible shelf edging | Dark impact-resistant PVC or veneer edge banding | |
| Base plinth | Recessed dark board base with horizontal protective toe-kick profile | |
| Internal hardware | Concealed hinges and side-mounted drawer slides proposed behind flush fronts | |
| Back fastening | Panelized back board connected to shelf and vertical panel rebates | |
| Edge Band Thickness | 2 mm | |
| Primary Connector Specification | Reference M6-M8 cam/bolt fittings with at least 2 fixing points at major joints |
PRODUCT MODULE 04 / 06
Functions & Adjustment
Adjustment / rotation / tilt / mobility / storage features
Data source: Functional configuration; the supplier specification prevails.
| Open book storage | Four visible display shelf zones provide upright book and object storage on left, center, and right levels | |
|---|---|---|
| Center drawer filing | Three equal-height stacked drawers store documents, stationery, and personal office items | |
| Concealed door storage | Two vertical doors provide hidden storage with a flush handle-free front appearance | |
| Side open compartments | Left and right lower bays each include two open display levels for frequently accessed items | |
| Display lighting provision | Dark shelf undersides support optional recessed LED strip installation in 350 to 380 mm display zones | |
| Door opening | Side-hinged doors proposed with 105-degree opening angle for access clearance | |
| Drawer operation | Full-extension side-mount drawer slides proposed with 400 mm travel for the 450 mm deep cabinet | |
| Leveling | Recessed plinth allows 4 adjustable feet with 15 mm vertical leveling range | |
| Anti-tip restraint | Wall anchor strap or bracket required at the upper rear rail for tall storage safety | |
| Modular installation | Flat-packed or assembled modules join into one continuous 2400 mm wall composition | |
| Cable / Vent Opening Reference | If fitted, 80 mm diameter |
PRODUCT MODULE 05 / 06
Packaging & Logistics
Verified carton / gross weight / assembly / loading data
Data source: Reference for export quotations and container planning.
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 700× 350 mm/carton according to carcass split | |
| Reference Packaged Gross Weight | 100 kg/set in 3 cartons | |
| Reference Packaging Volume | 0.65 m³/set |
PRODUCT MODULE 06 / 06
Applications & Usage
Recommended spaces / users / usage modes
Data source: Recommended applications based on product form and category.
| Executive office | Fits behind or beside a management desk for books, awards, documents, and concealed personal storage | |
|---|---|---|
| Manager workroom | Provides open reference shelves and three drawers for one to three daily users | |
| Home study | Suits a large study wall where books, collectibles, and office supplies need separate zones | |
| Consultation room | Supports brochures, samples, and decorative objects in client-facing meeting areas | |
| Boardroom support area | Can be installed along a rear wall for meeting materials and concealed refreshment supplies | |
| Hotel business lounge | Provides durable open display and locked-door storage potential in a premium lounge |
STANDARD S1
EU Market Entry Requirements * EN Standards
EU Market Access Requirements* EN Standards
No standards data is available for this market.
STANDARD S2
North America Purchasing & Inspection Reference * ANSI/BIFMA Standards
US and Canada office-furniture standards
| North America procurement and testing reference | ANSI/BIFMA X5.9 Storage Units |
|---|
STANDARD S3
Standards Applicable to China-Market Projects * GB Standards
Standards applicable to China-market projects
No standards data is available for this market.
Standardized tender description text
This product must meet the following technical requirements: 1. Technical standards and test reports must be supplied during tender or purchase confirmation; Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.
GENERATED EXPORTS
Ready-to-use export tools
Export data is generated from the current published product record.
Technical Report PDF
Directly download an English report in metric or imperial units.
Complete Parameter Workbook
Download all product information and parameter modules in English.
International Listing Template
English title, specifications, materials, standards and purchasing fields.
Customs Declaration Data
Prepare customs description, material, usage, dimensions and declaration elements.
Open Export Tool