纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1550 × 900 × 760 mm
Table extended length	2150 mm
Tabletop thickness	12 mm
Table leg section	60 x 60 mm
Under-table knee clearance height	660 mm
Chair seat height	450 mm
Chair seat dimensions	450 x 420 mm
Chair backrest height	380 mm
Extension leaf width	600 mm
Apron height below tabletop	100 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Table distributed static load capacity	150 kg
Seating capacity (closed configuration)	6 people
Seating capacity (extended configuration)	8 people
Table net weight (without chairs)	75 kg
Finish abrasion resistance (tabletop)	4000 cycles
Wood frame moisture content	12%
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop	12mm thick black matte sintered stone
Table frame and apron	Walnut-stained solid rubberwood
Table legs	Tapered solid walnut-stained wood
Chair frames	Solid walnut-stained hardwood
Chair seat padding	40mm thick high-density polyurethane foam
Chair seat upholstery	0.8mm thick black PU faux leather
Extension mechanism hardware	Cold-rolled steel slides
Joinery connectors	Zinc-plated steel dowels and cam locks
Wood finish	Matte nitrocellulose lacquer
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Table extension mechanism	Pull-out dual-leaf extension with 600mm total added length
Leg positioning	Four corner-mounted tapered legs
Table edge profile	Soft rounded radius edge
Chair design	Armless curved backrest silhouette
Tabletop surface property	Non-porous matte surface
Assembly requirement	Knockdown assembly required
Chair floor protection	Felt pads pre-installed on leg bases
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Total shipping gross weight	140 kg
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential dining room	Serves 6 daily, expands to 8 for family gatherings and dinner parties
Open-plan kitchen dining area	Compact closed size fits small to medium apartment kitchen layouts
Studio apartment dining zone	Scandinavian minimalist style coordinates with modern light wood or neutral interiors
Small café dining area	Durable easy-clean surface suits light commercial casual dining use
Recommended pairing	Pairs with 1200mm sideboard for tableware storage along adjacent dining wall
Floor protection suitability	Felt-pad legs suitable for tile, hardwood, and laminate hard flooring surfaces

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Furniture - Strength, durability and safety for domestic dining tables
EN 1022:2018	Furniture - Seating - Determination of stability for domestic dining chairs
EN 13722:2004	Furniture - Test methods for strength and durability of chair seats and backs

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to solid wood dining set structural safety
GB/T 4893.1-2021	Furniture surface wear resistance test, applicable to tabletop finish durability validation
GB 18584-2001	Indoor decorating and refurbishing materials limit of harmful substances, applicable to formaldehyde emission control

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to solid wood dining set structural safety；
2. GB/T 4893.1-2021：Furniture surface wear resistance test, applicable to tabletop finish durability validation；
3. GB 18584-2001：Indoor decorating and refurbishing materials limit of harmful substances, applicable to formaldehyde emission control；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · DT-EXT-WAL-BLK-6CH

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · DT-EXT-WAL-BLK-6CH

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · DT-EXT-WAL-BLK-6CH打开导出工具

页面快速操作

发布采购询价

产品描述

This extendable rounded rectangle 6-seater dining table set carries model DT-EXT-WAL-BLK-6CH, delivered as an unbranded offering rooted in clean Scandinavian minimalist design language. The set presents a balanced visual profile, pairing a warm walnut-stained wood frame with a sleek black matte tabletop, paired with matching armless chairs that feature a curved backrest silhouette. The table uses four corner-mounted tapered legs, with a soft rounded radius edge on the tabletop that softens the overall form, while the closed configuration maintains a compact footprint that expands smoothly via a built-in pull-out dual-leaf extension to accommodate extra guests.
The table’s frame, apron, and tapered legs are constructed from solid walnut-stained rubberwood, finished with matte nitrocellulose lacquer to highlight the wood grain, while the tabletop is formed from 12mm thick black matte sintered stone with a non-porous surface. The extension mechanism operates on cold-rolled steel slides, with zinc-plated steel dowels and cam locks securing all joinery for structural stability. Matching chairs use solid walnut-stained hardwood frames, with seats padded with 40mm thick high-density polyurethane foam and upholstered in 0.8mm thick black PU faux leather. Pre-installed felt pads on all chair and table leg bases prevent scuffs to finished flooring, and the set ships in knockdown format requiring on-site assembly.
In its closed position, the table comfortably seats 6 people, with generous under-table knee clearance and standard seat height for relaxed dining. When fully extended, it supports seating for 8, making it flexible for both daily use and larger group events. The non-porous, abrasion-resistant tabletop wipes clean easily, supporting regular daily use without visible wear from routine contact.
This set fits equally well in residential and light commercial settings: it works for dedicated home dining rooms, open-plan kitchen dining areas in small to medium apartments, and studio dining zones, where its warm neutral finish coordinates seamlessly with light wood or neutral interior palettes. It is also suitable for small casual café dining areas, where its durable, easy-care surface holds up to regular patron use. The felt-pad legs are safe for use on tile, hardwood, and laminate hard flooring surfaces, and the set pairs neatly with a sideboard placed along an adjacent wall for concealed tableware storage.
For procurement planning, note the set ships across two cartons, with a total shipping gross weight of 140kg, and requires a 40-minute assembly window per set. The solid wood frame is manufactured to a stable moisture content suited for indoor use, and the table supports a uniformly distributed static load of 150kg to accommodate standard dining setups without concern.

Extendable Rounded Rectangle 6-Seater Dining Table Set with Walnut Frame and Black Top Specifications

供应商与现货