纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1740 × 780 × 1030 mm
Overall 3-seat row dimensions	1740 x 780 x 1030 mm
Per-seat center-to-center width	580 mm
Seat height from finished floor	490 mm
Seat cushion depth (front to back)	480 mm
Backrest total height above seat surface	580 mm
Solid wood armrest height above seat surface	220 mm
Wood armrest panel thickness	54 mm
Pedestal base foot diameter	120 mm
Backrest ergonomic curvature radius	1200 mm
Minimum required front row clearance	900 mm
Finished Seat Cushion Thickness	90 mm
Backrest Padding Thickness	70 mm
Lumbar Support Zone Height	240 mm
Clear Width Between Armrests	540 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Per-seat static load capacity	260 kg
Total net weight per 3-seat row	90 kg
Recommended maximum occupancy per row	3 persons
Seat cushion indentation load deflection (ILD)	45 kg/m³
Foam rebound resilience	55%
Fabric upholstery abrasion resistance	50000 Martindale cycles
Wood armrest surface scratch resistance	2 H pencil hardness
Expected service life under daily public use	10 years
Seat Foam Density / Rebound Reference	45 kg/m³ / 65%
Back Foam Density Reference	38 kg/m³

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Seat and back upholstery	Light green polyester fabric with vertical channel quilting, 0.8 mm thickness
Seat cushion core	Cold-cured molded polyurethane foam, 80 mm thickness
Backrest cushion core	Molded polyurethane foam, 60 mm thickness, ergonomically contoured
Armrest structure	Solid hardwood with scratch-resistant polyurethane clear finish
Seat and back internal substrate	15 mm thick E1 grade hot-pressed plywood, formaldehyde emission ≤0.124 mg/m³
Pedestal support frame	2 mm thick cold-rolled steel, powder-coated brown finish
Floor mounting foot caps	Grey ribbed cast nylon with integrated steel anchor plate
Surface treatment for steel components	Acid pickling, degreasing, phosphating prior to powder coating
Upholstery seam stitch pitch	8 stitches per 30 mm
Seat Internal Support Board Thickness	14 mm bent plywood or equivalent support board
Backrest Internal Frame Thickness	14 mm bent plywood/composite reinforced frame
Gas-lift Engineering Specification	Recommended Class 4; outer tube 50 mm; stroke 100 mm

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Installation method	Permanent floor-mounted anchoring via pedestal base bolt points
Seat operation	Fixed non-tip-up contoured seat pan with no folding mechanism
Backrest function	Fixed ergonomic lumbar-support curved backrest, no recline adjustment
Armrest function	Dividing solid wood armrests between each seat position, integrated support structure
Optional accessory compatibility	Pre-drilled mounting points for row number plates, seat number tags, and under-seat book pockets
Floor protection	Ribbed nylon foot caps that distribute load and prevent finished floor scratching
Recline Angle / Lock Reference	125° with 3suggested lock positions
Tilt Tension User-weight Range	Reference adjustment coverage 120 kg
Height Adjustment Stroke	100 mm continuous travel
Rotation / Mobility Configuration	360° swivel with 5-caster multidirectional movement

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Carton Dimensions	850× 420× 720 mm
Reference Packaged Gross Weight	23 kg/set
Reference Carton Volume	0.26 m³/set
Indicative 20GP Loading	135 sets at 85% space utilization
Indicative 40HQ Loading	320 sets at 85% space utilization

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Indoor auditorium and performance hall installation	Permanent fixed row seating optimized for stage-facing viewing alignment
Conference hall and lecture theater application	Provides individual separated seats for long-duration meeting use
School assembly hall and campus theater deployment	Durable fixed construction suitable for daily student use
Church and multi-purpose public hall installation	Wood-accented aesthetic suits formal public gathering spaces
Cinema and screening room configuration	Contoured cushions support comfortable multi-hour viewing
Recommended installation row spacing	900 mm minimum to meet code clearance for audience passage
Recommended Matching Desk Size	2.4 m executive desk
Reference Daily Use Duration	8 hours/day; confirm by ergonomic testing

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12727:2018	European standard for performance requirements of ranked fixed auditorium seating
EN 1022:2018	Furniture seating strength and stability testing standard for public seating
EN 13501-1:2018	Fire classification of construction products, applicable to fabric upholstery for public spaces

STANDARD S2

北美市场采购验货参考 * ANSI/BIFMA 标准

美国及加拿大家具标准

ANSI/BIFMA X5.11-2015	Standard for public lounge and audience seating performance and durability testing

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wood furniture, applies to solid wood armrest components
GB 18580-2017	Formaldehyde emission limit for wood-based panels, applies to internal plywood substrates
GB/T 19001-2016	Quality management system requirement for commercial furniture manufacturing consistency

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wood furniture, applies to solid wood armrest components；
2. GB 18580-2017：Formaldehyde emission limit for wood-based panels, applies to internal plywood substrates；
3. GB/T 19001-2016：Quality management system requirement for commercial furniture manufacturing consistency；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · AUD-3S-GR-WD-001

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · AUD-3S-GR-WD-001

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · AUD-3S-GR-WD-001打开导出工具

页面快速操作

发布采购询价

产品描述

This 3-seat fixed floor-mounted auditorium seating balances understated visual appeal with durable, purpose-built construction for public gathering spaces. Arranged as a straight, continuous row, the seating features warm solid wood dividing armrests that create clear, defined individual seat positions, paired with light green vertically channel-quilted upholstery that adds subtle textural depth without overwhelming formal interior schemes. Flared, brown powder-coated steel pedestal supports anchor each row, creating a streamlined, uncluttered profile aligned for consistent stage-facing viewing. Each seat and backrest is built around a hot-pressed plywood core, topped with contoured molded foam cushions—thicker, cold-cured foam forms the seat pan, while the ergonomically curved backrest is shaped to provide consistent lumbar support. The solid hardwood armrests are finished with a scratch-resistant clear polyurethane coating, and all steel components undergo acid pickling, degreasing, and phosphating before powder coating to protect against daily wear. Ribbed grey nylon foot caps under each pedestal spread structural load and prevent scuffs or scratches to finished flooring surfaces. The fixed, non-folding seat pan and non-reclining backrest hold a 125° angle optimized for long-duration seating, with no moving parts to reduce long-term maintenance needs. Pre-drilled mounting points support easy addition of row number plates, individual seat tags, and under-seat book pockets to suit operational needs. The upholstered fabric is rated to withstand repeated use, while the armrest finish resists common surface scuffs from regular contact. This seating is well suited for permanent indoor installation in auditoriums and performance halls, conference spaces and lecture theaters, school assembly halls and campus theaters, formal church gathering spaces, and cinemas or screening rooms. Installations should use the recommended minimum row spacing to maintain clear audience passage between rows. Procurement teams should note each 3-seat set ships across two cartons, with a reference assembly time of 40 minutes per set; the fixed floor-mounted design requires permanent anchoring to finished floor surfaces, so pre-installation measurement of anchor point alignment and row layout is recommended before on-site work begins. The unbranded model supports consistent, coordinated row configurations for large venue fit-outs, with durable construction sized for regular daily public use.

3-Seat Fixed Floor-Mounted Auditorium Seating with Wood Armrests, Green Channel-Upholstered Seats Specifications

供应商与现货