基础物理尺寸
mm / 英寸自动双单位换算 · 工程采购基础规格
数据来源:工厂资料结构化字段,最终以实测值为准
| 产品外部尺寸(宽 × 深 × 高) | 1200 × 600 × 420 mm | |
|---|---|---|
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
重量、承重与性能参数
净重 / 最大承重 / 适用人数 / 耐久性能
数据来源:产品性能数据,采购前请核对具体测试口径
| Product net weight | 38 kg | |
|---|---|---|
| Distributed tabletop load | 50 kg | |
| Sliding extension load | 30 kg | |
| Suggested users | 4 persons | |
| Extension extension travel | 400 mm | |
| Panel edge impact rating target | 25 kg-cm | |
| Surface heat-resistance target | 80 degrees C for 20 minutes | |
| Recommended warranty | 3 years | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
材质与结构参数
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
数据来源:以工厂材质清单与验货报告为准
| Exterior covering | Black leather-look upholstery with visible perimeter and panel stitching | |
|---|---|---|
| Covering thickness | 1.2 mm | |
| Abrasion acceptance target | 30,000 Martindale cycles | |
| Core substrate | 18 mm wood-composite panel under padded wrapping | |
| Top slab construction | 30 mm composite panel with cushion layer and black wrapped finish | |
| Support posts | 25 mm diameter polished metal tubular posts | |
| Waterfall side panels | 40 mm wrapped composite returns with rounded exposed edges | |
| Lower sliding body | Composite box panel clad in matching black covering | |
| Slide interface | Metal or reinforced polymer telescoping rail set hidden under the top | |
| Base protection | 4 mm polymer glide pads under both ground-contact ends | |
| Stitching | Polyester thread with 6 mm seam pitch along panel edges | |
| Internal padding layer | 8 mm foam or soft backing beneath the exterior wrap |
功能与调节参数
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
数据来源:功能配置参数,以供应商正式规格为准
| Extendable surface | Sliding nested section adds 400 mm of usable table length for drinks, documents, or occasional laptop work | |
|---|---|---|
| Two-level top arrangement | Fixed upper slab rests on four 25 mm posts while the matching lower body slides outward | |
| Independent extension block | Rounded right-hand block travels out from the main frame and provides a continuous-height support surface | |
| Storage-style recess | The open under-top cavity accepts magazines or low-profile trays up to 180 mm high | |
| Floor protection | Rounded ground-contact ends should use polymer glides to reduce drag on hard floors | |
| Soft edge safety | Rounded wrapped front and side corners reduce sharp-contact impact in lounge traffic | |
| Extension positioning | Mechanical rails should lock in fully closed and fully open positions over a 400 mm travel | |
| Surface service use | The level top supports cups, trays, documents, and decor rather than writing-height office work | |
| Color and configuration | 1 visible black colorway with matching extension and contrasting stitch definition | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
包装与物流参数
经核验的外箱 / 毛重 / 组装 / 装柜数据
数据来源:外贸报价与装柜测算参考
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
应用场景与使用方式
推荐空间 / 目标用户 / 使用方式
数据来源:依据产品结构与品类整理的推荐应用场景
| Executive lounge | Place in front of a four-seat sofa group for documents, beverages, and informal discussions | |
|---|---|---|
| Reception waiting area | Use in premium reception zones where black stitched furniture conveys a restrained corporate appearance | |
| Manager office | Position between lounge chairs to create a compact meeting or tea-service zone | |
| Home living room | Serve as a modern black coffee table for daily drinks, books, remote controls, and decor | |
| Meeting breakout area | Support laptops and notepads in short collaborative sessions rather than full-height desk work | |
| Hotel suite lounge | Specify for suites or club lounges requiring a durable dark surface and compact extension capability | |
| Procurement configuration | Order with floor glides, load-rated slides, and a matching black furniture-protection maintenance kit |
欧盟市场准入要求 * EN 标准
欧洲市场准入与化学品要求
| EN 12521 furniture strength suitability | Use safety, stability, and durability requirements for domestic tables | |
|---|---|---|
| EN 15185 abrasion test suitability | Use abrasion assessment for the wrapped horizontal surface | |
| EN 15186 scratch test suitability | Use scratch-resistance assessment for coated or laminated decorative surfaces |
适用于中国市场项目的标准 * GB 标准
适用于中国市场项目的标准
| GB/T 3324 dimensional and structural suitability | Use for dimensional tolerances, shape tolerance, and general wooden furniture inspection | |
|---|---|---|
| GB/T 3325 durability acceptance | Use for strength and durability testing of metal-supported domestic furniture | |
| GB 18584 indoor air limit | Specify formaldehyde and soluble heavy-metal release verification for wrapped panel furniture |
本产品须满足以下技术参数要求: 1. GB/T 3324 dimensional and structural suitability:Use for dimensional tolerances, shape tolerance, and general wooden furniture inspection; 2. GB/T 3325 durability acceptance:Use for strength and durability testing of metal-supported domestic furniture; 3. GB 18584 indoor air limit:Specify formaldehyde and soluble heavy-metal release verification for wrapped panel furniture; 最终交付参数、检测报告和验收标准以双方采购合同为准。
一键导出完整商品资料
以下文件均根据当前已发布商品参数实时生成。
完整参数报告 PDF
直接下载英文参数报告,可选择公制或英制单位。
完整参数 Excel
导出全部商品信息与参数模块,文件内容统一使用英文。
外贸 Listing 模板
包含英文标题、规格、材质、标准和采购字段,可用于国际平台刊登。
海关申报数据
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具