Time

Field

Original Value

Corrected Value

Note / Status

No correction records yet. Found an error? Click the flag at the end of a row to report it.

PRODUCT MODULE 01 / 06

Physical Dimensions

Automatic mm / inch conversion · Core engineering specifications

Data source: Structured from factory data; final measured values prevail.

Overall dimensions (W × D × H)	1200 × 600 × 420 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

Weight, Load & Performance

Net weight / load capacity / users / durability

Data source: Product performance data; verify exact test conditions before procurement.

Product net weight	38 kg
Distributed tabletop load	50 kg
Sliding extension load	30 kg
Suggested users	4 persons
Extension extension travel	400 mm
Panel edge impact rating target	25 kg-cm
Surface heat-resistance target	80 degrees C for 20 minutes
Recommended warranty	3 years
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles

PRODUCT MODULE 03 / 06

Materials & Structure

Core acceptance fields · Panels / hardware / frame / upholstery

Data source: Subject to the factory material list and inspection report.

Exterior covering	Black leather-look upholstery with visible perimeter and panel stitching
Covering thickness	1.2 mm
Abrasion acceptance target	30,000 Martindale cycles
Core substrate	18 mm wood-composite panel under padded wrapping
Top slab construction	30 mm composite panel with cushion layer and black wrapped finish
Support posts	25 mm diameter polished metal tubular posts
Waterfall side panels	40 mm wrapped composite returns with rounded exposed edges
Lower sliding body	Composite box panel clad in matching black covering
Slide interface	Metal or reinforced polymer telescoping rail set hidden under the top
Base protection	4 mm polymer glide pads under both ground-contact ends
Stitching	Polyester thread with 6 mm seam pitch along panel edges
Internal padding layer	8 mm foam or soft backing beneath the exterior wrap

PRODUCT MODULE 04 / 06

Functions & Adjustment

Adjustment / rotation / tilt / mobility / storage features

Data source: Functional configuration; the supplier specification prevails.

Extendable surface	Sliding nested section adds 400 mm of usable table length for drinks, documents, or occasional laptop work
Two-level top arrangement	Fixed upper slab rests on four 25 mm posts while the matching lower body slides outward
Independent extension block	Rounded right-hand block travels out from the main frame and provides a continuous-height support surface
Storage-style recess	The open under-top cavity accepts magazines or low-profile trays up to 180 mm high
Floor protection	Rounded ground-contact ends should use polymer glides to reduce drag on hard floors
Soft edge safety	Rounded wrapped front and side corners reduce sharp-contact impact in lounge traffic
Extension positioning	Mechanical rails should lock in fully closed and fully open positions over a 400 mm travel
Surface service use	The level top supports cups, trays, documents, and decor rather than writing-height office work
Color and configuration	1 visible black colorway with matching extension and contrasting stitch definition
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

Packaging & Logistics

Verified carton / gross weight / assembly / loading data

Data source: Reference for export quotations and container planning.

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

Applications & Usage

Recommended spaces / users / usage modes

Data source: Recommended applications based on product form and category.

Executive lounge	Place in front of a four-seat sofa group for documents, beverages, and informal discussions
Reception waiting area	Use in premium reception zones where black stitched furniture conveys a restrained corporate appearance
Manager office	Position between lounge chairs to create a compact meeting or tea-service zone
Home living room	Serve as a modern black coffee table for daily drinks, books, remote controls, and decor
Meeting breakout area	Support laptops and notepads in short collaborative sessions rather than full-height desk work
Hotel suite lounge	Specify for suites or club lounges requiring a durable dark surface and compact extension capability
Procurement configuration	Order with floor glides, load-rated slides, and a matching black furniture-protection maintenance kit

STANDARD S1

EU Market Entry Requirements * EN Standards

EU Market Access Requirements* EN Standards

EN 12521 furniture strength suitability	Use safety, stability, and durability requirements for domestic tables
EN 15185 abrasion test suitability	Use abrasion assessment for the wrapped horizontal surface
EN 15186 scratch test suitability	Use scratch-resistance assessment for coated or laminated decorative surfaces

STANDARD S3

Standards Applicable to China-Market Projects * GB Standards

Standards applicable to China-market projects

GB/T 3324 dimensional and structural suitability	Use for dimensional tolerances, shape tolerance, and general wooden furniture inspection
GB/T 3325 durability acceptance	Use for strength and durability testing of metal-supported domestic furniture
GB 18584 indoor air limit	Specify formaldehyde and soluble heavy-metal release verification for wrapped panel furniture

Standardized tender description text

This product must meet the following technical requirements:
1. GB/T 3324 dimensional and structural suitability: Use for dimensional tolerances, shape tolerance, and general wooden furniture inspection;
2. GB/T 3325 durability acceptance: Use for strength and durability testing of metal-supported domestic furniture;
3. GB 18584 indoor air limit: Specify formaldehyde and soluble heavy-metal release verification for wrapped panel furniture;
Final delivery parameters, test reports, and acceptance criteria are subject to the purchase contract.

GENERATED EXPORTS

Ready-to-use export tools

Export data is generated from the current published product record.

Technical Report PDF

Directly download an English report in metric or imperial units.

PDF · CT-BLK-EXT-1200

Complete Parameter Workbook

Download all product information and parameter modules in English.

XLSX · CT-BLK-EXT-1200

International Listing Template

English title, specifications, materials, standards and purchasing fields.

XLSX · LISTING

Customs Declaration Data

Prepare customs description, material, usage, dimensions and declaration elements.

CUSTOMS · CT-BLK-EXT-1200Open Export Tool

Quick Actions

Post an RFQ

Product Description

The Black Wrapped Extendable Executive Coffee Table combines a low lounge profile with a concealed extending surface. Its visual character is defined by black leather-look upholstery, visible perimeter and panel stitching, rounded waterfall side returns, and polished metal support posts. A fixed upper slab sits on four posts, while a matching lower body remains nested until the rounded right-hand block slides outward. The result is a tailored, restrained piece with a continuous-height support surface when open and a clean executive appearance when closed. Construction uses an 18 mm wood-composite core beneath padded wrapping, with a 30 mm composite top slab finished with a cushion layer. The exterior covering is 1.2 mm black leather-look upholstery, and the 40 mm wrapped waterfall panels present rounded exposed edges. Support is provided by 25 mm diameter polished metal tubular posts, an 80 mm main support section with a 2 mm metal wall, and a rigid extension base. Hidden metal or reinforced polymer telescoping rails manage the sliding section, which should lock in both fully closed and fully open positions across its 400 mm travel. Functionally, the extending section adds usable table length for drinks, documents, or occasional laptop work. An open under-top cavity accepts magazines or low-profile trays up to 180 mm high. The design also includes an 80 mm cable opening with a 120 mm deep cable tray, rounded wrapped corners to reduce sharp contact in busy lounge areas, and ground-contact ends intended for polymer glides to reduce drag on hard floors. The table is suited to four users and supports a distributed tabletop load of 50 kg, with a sliding extension load of 30 kg. This table fits executive lounges, premium reception areas, manager offices, meeting breakout spaces, and hotel suite or club lounges. It also works in a modern residential living room for drinks, books, remote controls, and decorative objects. Its compact extension is better suited to short collaborative tasks and tea-service settings than full-height desk work. Buyers should note the unbranded model CT-BLK-EXT-1200 is supplied as one set across two cartons, with packaged gross weight of 90 kg and assembly reference time of 40 minutes per set. The finished top is 45 mm thick, with effective knee clearance of 680 mm high and 900 mm wide per main seat. Material and performance targets include 30,000 Martindale abrasion cycles, an 80 degree C heat-resistance target for 20 minutes, and a 25 kg-cm panel edge impact rating target. Reception, hospitality, and workplace purchasers should plan delivery access, floor protection, and installation around the two-carton format and 38 kg net product weight.

Black Wrapped Extendable Executive Coffee Table Specifications

Suppliers and stock