纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1300 × 750 × 450 mm
Tabletop thickness	12 mm
Lower storage platform height from floor	120 mm
Drawer internal dimensions	500 x 400 x 150 mm
Metal frame wall thickness	2 mm
Spherical support foot diameter	80 mm
Table edge radius	30 mm
Open frame vertical clearance under top	200 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Tabletop distributed static load	50 kg
Drawer static load capacity	10 kg
Product net weight	45 kg
Top surface scratch resistance	3000 cycles
Recommended maximum placeable item height	350 mm
Stability tilt load on edge	20 kg
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop	12mm glossy sintered stone/laminate panel, polished sealed finish
Frame trim	Dark bronze polished stainless steel, mirror polished edge
Lower storage body	Warm taupe high-gloss lacquered MDF, sealed scratch-resistant coating
Drawer front panel	High-gloss lacquered MDF, matching taupe finish, flush fit
Spherical support foot	Polished dark chrome-plated solid metal, floor contact pad
Base bottom trim	Dark bronze metal skid ring, anti-scratch felt lining
Drawer interior	E1 grade engineered wood, smooth matte finish
Drawer slides	Cold-rolled steel silent full-extension slides, zinc plated
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Drawer operation	Single flush-mounted drawer with soft-close slides, 300mm extension length
Lower open shelf access	Curved open metal frame allows 3-sided access to shelf
Tabletop surface use	Smooth non-porous sealed surface, stain and water resistant
Floor protection	Felt pads on all base contact points prevent floor scratching
Structural support	Cantilevered metal frame with central spherical foot distributes weight evenly
Edge safety	Fully rounded perimeter edges eliminate sharp corners
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential living room	Placed in front of 3-seat upholstered sofas for beverage, book and decor display
Lounge and reception areas	Used in high-end residential lounges or boutique office waiting areas
Small apartment configurations	Sized for 25sqm living rooms without excessive floor space occupation
Matched set installation	Paired with coordinating round side table for cohesive living room layout
Low-pile carpet or hard flooring	Suitable for placement on carpet, tile or wood flooring with integrated floor protection

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Furniture strength, durability and safety for domestic tables, applicable for performance validation
EN 13722:2004	Furniture surface finish resistance to cold liquids, applicable for tabletop testing

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to lacquered storage components
GB/T 4897.3-2003	Particleboard for furniture use, applicable to engineered wood substrate
GB 6675-2014	Furniture safety code for sharp edges, applicable to household use

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to lacquered storage components；
2. GB/T 4897.3-2003：Particleboard for furniture use, applicable to engineered wood substrate；
3. GB 6675-2014：Furniture safety code for sharp edges, applicable to household use；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CT-OVL-1300-LS

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CT-OVL-1300-LS

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CT-OVL-1300-LS打开导出工具

页面快速操作

发布采购询价

产品描述

The Modern Oval Coffee Table with Lower Storage Drawer (model CT-OVL-1300-LS) is an unbranded public and residential furniture piece defined by refined, contemporary luxury styling. Its soft oval silhouette features fully rounded 30mm radius perimeter edges that eliminate sharp corners, anchored by an open cantilevered dark bronze-finish metal frame with mirror-polished edge trim. The frame supports a glossy light engineered stone tabletop finished with a polished, sealed non-porous surface, balanced by a central polished dark chrome-plated solid metal spherical support foot fitted with anti-scratch felt pads to protect flooring. The warm taupe high-gloss lacquered MDF storage body sits within the frame, with a flush-matched taupe high-gloss drawer front aligned to the curved frame structure, for a streamlined, uncluttered visual profile. Construction pairs durable, thoughtfully selected materials for long-term use: the 12mm thick sintered stone/laminate tabletop carries a scratch-resistant rating of 3000 cycles, with load-bearing sections built to a 40mm composite thickness for reliable support. The dark bronze stainless steel frame uses 2mm wall thickness material, connected to a 25mm thick lacquered MDF storage body finished with a scratch-resistant sealed coating. The single drawer is built with E1 grade engineered wood interiors, fitted with cold-rolled steel silent soft-close full-extension slides that extend 300mm, while the base skid ring includes an anti-scratch felt lining. Structurally, the cantilever frame and central spherical foot distribute weight evenly, supporting a 150kg uniformly distributed static load on the tabletop, 50kg distributed static load for regular use, 20kg edge tilt stability load, and 10kg static load for both the drawer and integrated cable management tray. Practical functions are tailored for flexible daily use: the smooth non-porous tabletop resists stains and water, suitable for holding beverages, reading materials, and decorative items, with a 350mm maximum recommended height for placed items to preserve sightlines. The curved open metal frame allows three-sided access to the lower open shelf, positioned 120mm from the floor with 200mm vertical clearance under the tabletop, while the enclosed drawer stores smaller items out of view. Integrated cable management holds up to 10 power or data cables to keep connected spaces tidy, and felt pads across all floor contact points prevent scratches to carpet, tile, or wood surfaces. This coffee table is sized for versatile placement: at 1300 x 750 x 450 mm, it fits neatly in 25sqm small apartment living rooms positioned in front of 3-seat upholstered sofas, works as a refined accent in high-end residential lounges and boutique office reception waiting areas, and can be paired with a coordinating round side table for a cohesive furnished layout. It is suitable for placement on low-pile carpet and all hard flooring types. For procurement, note that each unit ships in 2 cartons with a total packaged gross weight of 90kg and 0.55m³ packaging volume, requiring 40 minutes of on-site assembly per set. The product has a net weight of 45kg, so installation teams should plan for appropriate handling to avoid damage during placement.

Modern Oval Coffee Table with Lower Storage Drawer Specifications

供应商与现货