纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1150 × 760 × 500 mm
Overall set dimensions (large table)	1150 x 760 x 500 mm
Small nested table dimensions	700 x 700 x 420 mm
Main table top thickness	38 mm
Smoked glass top thickness	8 mm
Recessed cup holder diameter	90 mm
Cup holder recess depth	12 mm
Nesting clearance under main table	300 mm
Small table overhang from main table when nested	280 mm
Base wall thickness (sculptural body)	18 mm
Glass top edge chamfer	2 mm
Floor contact pad diameter	60 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Main table top distributed static load capacity	60 kg
Set total net weight	42 kg
Finish abrasion resistance	2000 cycles
Tempered glass impact resistance	100 J
Floor protection load distribution	0.4 MPa
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test
Recommended Procurement Warranty	Structure 5 years; hardware 3 years; finish 2 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Main table base and top substrate	Molded MDF with matte cream lacquer finish
Small table sculptural base	Molded MDF with matching matte cream lacquer
Small table top	8mm bronze-tinted smoked tempered safety glass
Recessed cup holders	Integrally molded MDF with matching matte cream finish
Floor contact pads	Non-marking TPE anti-slip pads
Hardware connectors (if KD)	Zinc-plated steel M8 cam bolts and dowels
Glass edge finish	Polished smooth rounded edge
Surface coating	Eco-friendly low-VOC matte lacquer
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Nesting space-saving function	Small table tucks 420mm under main table to reduce footprint by 40%
Integrated cup holder function	Three recessed indentations stabilize drinkware and small decor to prevent sliding
Dual table usage mode	Tables separate to serve multiple seating positions or combined as a single large surface
Floor protection function	TPE pads prevent scratches on hardwood, tile and rug surfaces and reduce sliding
Edge safety design	All table edges have 15mm radius rounded corners to eliminate sharp impact points
Anti-tip structural design	Wide curved drum base lowers center of gravity to prevent tipping during normal use
Glass surface maintenance	Smooth non-porous tempered glass top wipes clean with standard household cleaners
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Primary use case	Central placement in front of 3-seat or L-shaped residential living room sofas
Style suitability	Modern cream, wabi-sabi, minimalist, and contemporary interior design schemes
Space saving benefit	Ideal for small to medium living rooms and open-plan studio apartments
Functional configuration	Use main table for serving snacks/drinks, small table as side/end table next to seating
Recommended placement surface	Low-pile area rugs, hardwood flooring, and polished tile living room surfaces
User demographic	Urban households and design-focused renters seeking artistic low-profile living room furniture

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015 Furniture - Strength, durability and safety for domestic tables	Applies to structural load and safety requirements for home coffee tables
EN 14073-2:2004 Office furniture - Storage furniture Part 2: Safety requirements	Applies to edge and impact safety for low-height domestic seating tables
EN 12150-1:2015 Glass in building - Thermally toughened soda lime silicate safety glass	Applies to tempered glass strength and fragmentation safety standards

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017 General technical requirements for wooden furniture	Applies to structural strength, finish quality and dimensional tolerance of MDF base components
GB/T 4897.3-2015 Particleboard for interior fitment	Applies to load-bearing MDF substrate quality and formaldehyde emission limits
GB 15763.2-2005 Safety glazing materials for building Part 2: Tempered glass	Applies to safety performance of the smoked glass small table top

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017 General technical requirements for wooden furniture：Applies to structural strength, finish quality and dimensional tolerance of MDF base components；
2. GB/T 4897.3-2015 Particleboard for interior fitment：Applies to load-bearing MDF substrate quality and formaldehyde emission limits；
3. GB 15763.2-2005 Safety glazing materials for building Part 2: Tempered glass：Applies to safety performance of the smoked glass small table top；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · NCT-CREAM-PEBBLE-2PC

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · NCT-CREAM-PEBBLE-2PC

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · NCT-CREAM-PEBBLE-2PC打开导出工具

页面快速操作

发布采购询价

产品描述

This 2-piece pebble-shaped nesting coffee table set delivers sculptural organic appeal for contemporary living spaces, defined by soft curved silhouettes and a cohesive matte cream finish that aligns with modern cream, wabi-sabi, minimalist, and contemporary interior schemes. The low-profile set features a large main table and smaller matching table that nest neatly: the small table tucks fully under the main table to reduce overall footprint by 40%, with a 280 mm overhang from the main table edge when nested, creating a layered, flowing visual arrangement. The set’s construction uses molded MDF for both sculptural bases, finished with eco-friendly low-VOC matte cream lacquer, with zinc-plated steel cam bolts and dowels for sturdy assembly. The main table features a 38 mm thick solid cream top built from composite panel layers for load bearing, while the small table is topped with 8 mm bronze-tinted smoked tempered safety glass, finished with polished smooth rounded edges. All corners carry a 15 mm radius rounded edge to eliminate sharp impact points, and wide curved drum bases lower the center of gravity for anti-tip stability during normal use. Non-marking TPE anti-slip pads at the base protect hardwood, tile, and rug surfaces from scratches while reducing unwanted sliding. For practical use, the main table supports a 60 kg distributed static load, with three integrally molded recessed cup holders sized to stabilize drinkware and small decor items and prevent sliding. The two tables can be used separately to serve multiple seating positions, with the small table functioning as a side table next to armchairs, or nested together to form a single expansive surface. The non-porous smoked glass top wipes clean easily with standard household cleaners, and the lacquer finish offers tested abrasion resistance for long-term daily use. This set is ideal for central placement in front of 3-seat or L-shaped sofas in small to medium living rooms and open-plan studio apartments, suited for urban households and design-focused renters seeking artistic, functional low-profile furniture. For procurement, note the set ships in two cartons with a total packaged gross weight of 90 kg, requires 40 minutes of assembly per unit, and is designed for placement on low-pile area rugs, hardwood, or polished tile surfaces.

2-Piece Pebble-Shaped Nesting Coffee Table Set with Smoked Glass Top and Integrated Cup Holders Specifications

供应商与现货