纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1600 × 900 × 450 mm
individual tabletop segment side length	830 mm
tabletop thickness	20 mm
pedestal base top width	350 mm
pedestal base bottom flare width	480 mm
pedestal height	430 mm
tabletop overlap length	230 mm
metallic edge trim thickness	2 mm
floor clearance under tabletop	100 mm
pedestal wall thickness	15 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

tabletop distributed static load	80 kg
point load capacity per 100x100mm area	20 kg
product net weight	75 kg
finish scratch resistance rating	3H
surface water repellency rating	Grade 5
base lateral stability load	30 kg
suitable number of simultaneous users	6
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

main tabletop	Polished panda-style marble-look stone with grey/black veining
tabletop edge trim	Polished brushed stainless steel band
pedestal bases	Powder-coated dark carbon steel, tapered flared form
base structural frame	15mm thick welded steel internal support
tabletop backing layer	12mm thick moisture-resistant MDF reinforcement
base bottom pads	5mm thick non-slip felt floor protectors
metal surface finish	Matte black powder coating, 80um thickness
stone surface sealant	Food-safe penetrating stone sealer
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

surface use support	Flat seamless extended surface for drinks, decor and snack service
floor protection	Felt bottom pads prevent scuffing on carpet and hard flooring
structural stability	Dual pedestal weight distribution eliminates wobble on level floors
cleaning compatibility	Sealed non-porous surface supports wiping with neutral household cleaners
installation requirement	Partial assembly required: attach tabletop segments to pre-drilled pedestal bases
mobility	Fixed non-rolling design, no casters or moving parts
storage provision	No built-in drawers, shelves or hidden compartments
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

primary living room placement	Positioned in front of large sectional sofas in open-plan living areas
luxury residential application	Suitable for modern, Italian minimalist or light luxury interior schemes
lounge area service use	Supports casual drink service, snack display and decorative item placement
show home / model suite use	Ideal for upscale residential show homes and high-end apartment staging
recommended pairing furniture	Matches tufted leather or fabric sectionals, low-pile carpets, metal accent lighting
indoor use limitation	Designed for dry indoor use only, not suitable for outdoor or high-moisture areas

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

furniture safety for domestic use	EN 12521:2015
stone surface slip resistance	EN 14231:2003
surface formaldehyde emission	EN 13986:2004

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

tabletop material safety	GB 6566
furniture surface durability	GB/T 4893.4
furniture structural stability	GB/T 10357.7
metal coating adhesion	GB/T 9286

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. tabletop material safety：GB 6566；
2. furniture surface durability：GB/T 4893.4；
3. furniture structural stability：GB/T 10357.7；
4. metal coating adhesion：GB/T 9286；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CT-DPM-2PD-1609

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CT-DPM-2PD-1609

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CT-DPM-2PD-1609打开导出工具

页面快速操作

发布采购询价

产品描述

The Contemporary Overlapping Rounded-Square Panda Marble Effect Coffee Table with Dual Tapered Metal Pedestals delivers a sleek, luxury-forward silhouette defined by two offset rounded-square tabletop segments joined by a 230 mm overlap to form a single extended flat surface. Each tabletop segment measures 830 mm per side, finished with a 2 mm thick polished brushed stainless steel edge trim that highlights the soft, curved geometry of the design. The table rests on two tapered flared pedestal bases, which narrow from a 480 mm wide floor-level flare to a 350 mm wide top connection point, creating a balanced, visually light profile that avoids the bulk of traditional four-leg coffee table designs. The 20 mm thick tabletop is crafted from polished panda-style marble-look stone marked with soft grey and black veining, supported by a 12 mm thick moisture-resistant MDF backing layer for reinforced structural integrity, with load-bearing sections utilizing a 40 mm composite build-up. The stone surface is treated with a food-safe penetrating sealer, carrying a Grade 5 water repellency rating and a 3H scratch-resistant finish. Pedestal bases are constructed from dark carbon steel with an 80 um thick matte black powder coating, anchored by 15 mm thick welded steel internal frames, and fitted with 5 mm thick non-slip felt pads at the base to protect floor surfaces. The table holds a distributed static tabletop load of 80 kg, supports a 20 kg point load per 100x100 mm area, and delivers reliable lateral stability with a 30 kg lateral load rating, with dual pedestal weight distribution eliminating wobble on level floors. Its 450 mm overall height creates a low, accessible profile suited to lounge use, with no casters or built-in storage to preserve its clean lines. The sealed non-porous surface wipes clean easily with neutral household cleaners, supporting casual use for drink service, snack display, and decorative object placement. Designed exclusively for dry indoor environments, it is ideal for positioning in front of large sectional sofas in open-plan living spaces, complementing modern, Italian minimalist, and light luxury interior schemes. It pairs seamlessly with tufted leather or fabric sectionals, low-pile carpets, and metal accent lighting, and is equally well-suited for high-end residential show homes and upscale apartment staging, accommodating up to six simultaneous users around its perimeter. Procurement teams should note the product ships unbranded under model CT-DPM-2PD-1609, packaged as one set across two cartons with a total packaged gross weight of 90 kg. Partial assembly is required, with a reference assembly time of 40 minutes to affix tabletop segments to pre-drilled pedestal bases. The fixed, non-rolling design requires no ongoing adjustment after installation, and the felt floor pads eliminate the need for additional surface protection for both carpet and hard flooring applications.

Contemporary Overlapping Rounded-Square Panda Marble Effect Coffee Table with Dual Tapered Metal Pedestals Specifications

供应商与现货