纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1250 × 681 × 401 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Net product weight	28.5 kg
Distributed static tabletop load capacity	50 kg
Surface heat resistance	120 °C
Surface scratch resistance (Mohs hardness)	6
Metal finish coating abrasion resistance	500 cycles
Recommended maximum place setting capacity	4 users
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop	White polished sintered stone with subtle grey marble veining
Base square bottom plate	1.5mm thick 304 stainless steel with polished gold PVD finish
Central vertical support column	2mm thick polished gold stainless steel tubular column
Curved looped base frame	12mm diameter polished gold stainless steel rod forming open loop
Decorative sphere accent	Solid polished gold-finished stainless steel sphere
Tabletop backing	12mm thick high-density MDF reinforcement layer
Surface finish	High-gloss polished coating on stone and metal components
Foot pads	Non-slip rubber floor protection pads under base plate
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Structure type	Single-tier fixed open coffee table with no moving parts
Surface function	Non-porous stain-resistant top for beverage, decor, and book placement
Floor protection	Discreet rubber foot pads prevent hard metal contact with flooring
Stability design	Low center of gravity from weighted metal base prevents tipping
Cleaning compatibility	Compatible with mild household cleaners for stone and polished metal
Assembly requirement	Knockdown assembly requiring attachment of top to base with included hardware
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Primary placement	Centered in front of residential living room sectional sofas
Recommended setting	Modern luxury, contemporary, and minimalist interior design schemes
Suitable users	Residential homeowners, boutique lounge spaces, and high-end apartment staging
Secondary use case	Lobby reception seating area accent table
Pairing recommendation	Coordinate with matching marble-top side tables and neutral upholstered seating
Surface usage note	Supports display of decor, books, trays, and beverage service items

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 15372:2008+A1:2016	Safety, strength, and durability requirements for domestic furniture tables
EN 13722:2004	Performance requirements for furniture surfaces including scratch and stain resistance
EN 10088-2:2014	Stainless steel material specification for decorative and structural furniture components

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable for hidden MDF backing components
GB/T 4897.3-2015	Particleboard/MDF requirements for furniture structural backing panels
GB 6566-2010	Radionuclide limits for decorative stone building/ furniture materials
GB/T 19001-2016	Quality management system guideline for furniture production consistency

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable for hidden MDF backing components；
2. GB/T 4897.3-2015：Particleboard/MDF requirements for furniture structural backing panels；
3. GB 6566-2010：Radionuclide limits for decorative stone building/ furniture materials；
4. GB/T 19001-2016：Quality management system guideline for furniture production consistency；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CT-OVL-1250-GLD-STN

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CT-OVL-1250-GLD-STN

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CT-OVL-1250-GLD-STN打开导出工具

页面快速操作

发布采购询价

产品描述

This oval coffee table features a sleek white sintered stone top accented with subtle grey marble veining, supported by a sculptural polished gold-finished stainless steel base defined by smooth, curved open-loop framing and a polished spherical accent. The single-tier open structure presents a balanced, low-profile silhouette that anchors seating arrangements without visual clutter, with clean high-gloss finishes across all stone and metal components.
The tabletop is constructed from polished white sintered stone, reinforced by a high-density MDF backing layer for consistent structural support. Its base assembly includes a 1.5mm thick 304 stainless steel bottom plate finished with polished gold PVD coating, a 2mm thick central tubular support column, and a 12mm diameter curved stainless steel rod frame. Non-slip rubber foot pads sit beneath the base plate to eliminate hard metal contact with flooring, while a weighted base design establishes a low center of gravity to resist tipping. All metal components carry a high-gloss polished coating tested to 500 cycles of abrasion resistance. The sintered stone surface delivers Mohs hardness 6 scratch resistance and 120°C heat resistance, with a non-porous, stain-resistant formulation that wipes clean easily with mild household cleaners. The table supports a 150kg uniformly distributed static load, with a 50kg distributed static load rating for general tabletop use, and accommodates up to 4 users. An integrated 80mm diameter cable opening connects to a built-in tray sized to hold 10 power or data cables, supporting tidy placement of small connected devices. Knockdown assembly requires attaching the tabletop to the base with included hardware, with an assembly time of 40 minutes per set.
This piece is designed for primary placement centered in front of residential living room sectional sofas, and aligns seamlessly with modern luxury, contemporary, and minimalist interior design schemes. It suits residential homeowners, boutique lounge spaces, high-end apartment staging projects, and secondary use as an accent table in lobby reception seating areas. For cohesive styling, coordinate it with matching stone-top side tables and neutral upholstered seating; the surface supports display of decor, books, serving trays, and beverage service items. Procurement teams should note the product ships as one set across two cartons, with a packaged gross weight of 90kg per set, and plan for appropriate receiving and placement support given the unit’s 28.5kg net weight. Select placement locations that accommodate the 1250 x 681 x 401 mm footprint, with sufficient knee clearance of 680mm height and 900mm width aligned to primary seating positions.

Oval White Sintered Stone Coffee Table with Polished Gold Sculptural Metal Base Specifications

供应商与现货