纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	900 × 900 × 460 mm
Overall assembled dimensions	900 x 900 x 460 mm
Tabletop slab thickness	51 mm
Recessed metal inlay dimensions	250 x 350 mm
Recessed inlay inset depth from tabletop edge	270 mm
Stepped pedestal base top tier width	600 mm
Stepped pedestal base bottom tier width	650 mm
Pedestal base total height	409 mm
Tabletop overhang beyond pedestal edge	150 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Assembled net weight	50 kg
Distributed static tabletop load capacity	136 kg
Surface scratch resistance rating	6 Mohs
Surface water absorption rate	0.05%
Gloss finish light reflectance value	90%
Recommended maximum number of users	4
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop core and surface	High-gloss sintered stone with panda white marble veining, 51mm thick slab
Recessed inlay component	Brushed black stainless steel, 1.5mm sheet thickness, recessed flush fit
Pedestal base construction	High-density MDF substrate, high-gloss white painted finish, stepped stacked design
Inlay mounting hardware	Zinc-plated steel corner brackets, M6 machine screws, recessed flush mount
Base bottom protective pads	3mm thick non-slip EVA rubber pads, 4 pieces at base corners
Tabletop edge finish	Straight polished square edge, matching surface veining and gloss level
Paint coating thickness on base	0.2mm polyurethane high-gloss coating, scratch-resistant topcoat
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support
Reference Finish / Color Count	Recommended 6top finishes and 3frame colors

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Surface storage and display function	Flat load-bearing tabletop supports decor, drinks, books up to 136kg distributed weight
Recessed metal inlay function	Shallow recessed tray holds small items, remotes, or decor to prevent sliding
Fixed pedestal support structure	Center-aligned stepped pedestal provides even weight distribution, no leg obstruction around perimeter
Floor protection design	Bottom EVA pads prevent scuffing on hard flooring, eliminate table wobble on even surfaces
Easy-clean surface property	Non-porous glossy surface resists common household stains, wipes clean with damp cloth
Leveling adjustment capability	Hidden adjustable feet under base compensate for 5mm floor unevenness
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential living room application	Centered in front of sofas in modern, minimalist, or luxury contemporary living rooms
Commercial lounge application	Used in hotel lobbies, office reception areas, or high-end retail lounge spaces
Recommended surrounding furniture	Paired with 3-seater sofas, armchairs, or sectional seating with 450 mm seat height
Surface use compatibility	Suitable for placing coffee sets, decorative objects, books, and remote controls
Floor type suitability	Safe for use on hardwood, tile, laminate, and low-pile carpet flooring
Design style matching	Coordinates with monochrome, marble-accent, metallic, or luxury minimalist interior schemes

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

Surface wear resistance	EN 15185:2011 Furniture - Test for surface wear resistance, Class 2 minimum for hard tops
Stability requirement	EN 1730:2012 Furniture - Test methods for table stability, no tipping under 100N edge load
Edge safety requirement	EN 12520:2015 Furniture - Edge and corner safety, rounded 1mm minimum edge radius

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

Tabletop dimensional tolerance	GB/T 3324General technical requirements for wooden furniture, ±1mm flatness tolerance
Surface coating adhesion	GB/T 4893.4Furniture surface paint film adhesion test, Grade 1 minimum requirement
Formaldehyde emission limit	GB 18584Indoor decoration materials, ≤0.124mg/m³ for wood-based panels

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. Tabletop dimensional tolerance：GB/T 3324General technical requirements for wooden furniture, ±1mm flatness tolerance；
2. Surface coating adhesion：GB/T 4893.4Furniture surface paint film adhesion test, Grade 1 minimum requirement；
3. Formaldehyde emission limit：GB 18584Indoor decoration materials, ≤0.124mg/m³ for wood-based panels；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CT-SQ-PMB-900

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CT-SQ-PMB-900

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CT-SQ-PMB-900打开导出工具

页面快速操作

发布采购询价

产品描述

The Square Panda Marble-Effect Pedestal Coffee Table with Recessed Black Metal Inlay is a fixed pedestal-style coffee table designed for contemporary interiors. Its visual profile features a perfectly square, high-gloss tabletop patterned with panda white marble veining, finished with a straight polished edge that matches the surface’s veining and reflective sheen. A brushed black stainless steel inlay sits flush with the tabletop, set in from the edge for balanced visual contrast, while the center-aligned white stepped pedestal base creates a streamlined, open silhouette without obstructive perimeter legs, with subtle tiered width variation between its upper and lower sections for visual depth. The tabletop is crafted from 51mm thick high-gloss sintered stone, rated 6 Mohs for scratch resistance with a 0.05% water absorption rate and 90% light reflectance value. The pedestal base uses high-density MDF substrate finished with a 0.2mm scratch-resistant polyurethane high-gloss white coating, constructed with primary 25mm panels and a 40mm composite build-up for load-bearing sections. The recessed inlay is formed from 1.5mm brushed black stainless steel, mounted with zinc-plated steel corner brackets and M6 machine screws for a flush fit, while four 3mm non-slip EVA rubber pads line the base corners alongside hidden adjustable feet. Functionally, the flat sintered stone top supports up to 136kg of distributed static weight for displaying decor, serving drinks, or holding reading materials, while the shallow recessed metal tray prevents small items like remotes from sliding and accommodates up to 10 power or data cables with a 10kg tray load capacity. The non-porous glossy surface wipes clean with a damp cloth to resist common household stains, the center pedestal ensures even weight distribution and unobstructed legroom around the table perimeter, and the base pads prevent floor scuffing while adjustable feet compensate for minor floor unevenness. The table supports up to four users, fitting seamlessly centered in front of 3-seater sofas, armchairs, or 450mm seat height sectionals in modern, minimalist, or luxury residential living rooms, as well as commercial spaces including hotel lobbies, office reception areas, and high-end retail lounges. It coordinates with monochrome, marble-accent, metallic, or luxury minimalist design schemes, and is safe for use on hardwood, tile, laminate, and low-pile carpet flooring. For procurement, note each unit ships in two cartons with a total packaged gross weight of 90kg, requires 40 minutes of assembly time, and is sold as an unbranded model, suitable for staging and furnishing projects requiring a polished, high-contrast contemporary accent piece.

Square Panda Marble-Effect Pedestal Coffee Table with Recessed Black Metal Inlay Specifications

供应商与现货