| 纠错时间 | 修改字段 | 原参数 | 修改后参数 | 说明 / 状态 |
|---|---|---|---|---|
暂无参数纠错记录，发现错误可点击行末旗标提交 | ||||
mm / 英寸自动双单位换算 · 工程采购基础规格
| Overall large table dimensions | 800 x 800 x 500 mm | |
|---|---|---|
| Overall small table dimensions | 700 x 700 x 450 mm | |
| Tabletop thickness (large table) | 19 mm | |
| Tabletop thickness (small table) | 19 mm | |
| Gold metal edge trim width | 30 mm | |
| Large plinth base footprint | 500 x 500 mm | |
| Small plinth base footprint | 420 x 420 mm | |
| Nesting overlap depth | 300 mm | |
| Floor clearance under tabletop edge | 100 mm | |
| Tabletop corner radius | 20 mm | |
| Gold plinth wall thickness | 1.2 mm | |
| Nested combined footprint (stored) | 800 x 1050 mm | |
| Finished Top Thickness | 45 mm | |
| Effective Knee Clearance | 680 mm high and 900 mm wide per main seat | |
| Leg / Support Section | 80 mm main section with 2 mm metal wall | |
| Cable Opening Size | 80 mm diameter; cable tray depth 120 mm |
净重 / 最大承重 / 适用人数 / 耐久性能
| Large table total weight | 42 kg | |
|---|---|---|
| Small table total weight | 32 kg | |
| Large table distributed static load capacity | 100 kg | |
| Tabletop surface stain resistance rating | Grade 4 | |
| Gold finish abrasion cycle count | 1000 cycles | |
| Recommended maximum place setting capacity | 4 place settings | |
| Base static stability tilt threshold | 15 degrees | |
| Stone top heat resistance | 120 °C | |
| Top Static Load Reference | 150 kg uniformly distributed | |
| Drawer Slide Load / Life | 45 kg/pair; 50000 cycles |
工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料
| Large table tabletop | Polished white artificial sintered stone slab with smooth low-sheen finish | |
|---|---|---|
| Small table tabletop | Polished white artificial sintered stone slab with smooth low-sheen finish | |
| Tabletop edge trim | Brushed gold 304 stainless steel trim wrapped around perimeter edge | |
| Large table support plinth | Brushed gold finished 1.2mm thick stainless steel hollow central block base | |
| Small table support plinth | Brushed gold finished 1.2mm thick stainless steel hollow central block base | |
| Base bottom protective pads | 3mm thick non-slip rubber pads affixed to plinth bottom corners | |
| Tabletop to base connection | M8 steel mounting bolts with anti-loosening washers, 4 bolts per table | |
| Surface finish (metal parts) | Brushed PVD gold plated finish with anti-tarnish clear top coat | |
| Primary Panel Thickness | 25 mm; load-bearing top may use 40 mm composite build-up | |
| Edge Band Thickness | 2 mm | |
| Metal Frame Wall Thickness | 2 mm cold-rolled steel | |
| Primary Connector Specification | Reference M6-M8 with at least 2 fixing points per main support |
升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能
| Nesting storage function | Smaller table slides partially under the larger table to reduce occupied floor space by 37% | |
|---|---|---|
| Surface use function | Flat polished top supports placement of drinks, decor, books and serving trays for living room use | |
| Independent use function | Each table functions as a standalone low coffee table when separated for flexible seating arrangements | |
| Floor protection function | Rubber base pads prevent scratches to hard floor surfaces and eliminate sliding during use | |
| Surface cleaning function | Non-porous polished top allows wet wiping with common household cleaners without staining | |
| Assembly function | Tabletop attaches to pre-finished plinth base via included hardware with no on-site drilling required | |
| Arrangement flexibility function | Tables can be positioned side-by-side, offset at angles, or fully nested to adapt to different room layouts | |
| Cable Management Capacity | Reference capacity 10power/data cables; tray load 10 kg | |
| Reference Reassembly Count | Main joints should support 5controlled assembly cycles |
经核验的外箱 / 毛重 / 组装 / 装柜数据
| Reference Package Count | 1 set / 2 cartons | |
|---|---|---|
| Reference Assembly Time | 40 minutes per set | |
| Reference Package Dimensions | 2100× 1100× 300 mm | |
| Reference Packaged Gross Weight | 90 kg/set in 2 cartons | |
| Reference Packaging Volume | 0.55 m³/set |
推荐空间 / 目标用户 / 使用方式
| Residential living room application | Placement in front of sofas or sectionals for serving drinks, displaying decor and daily use | |
|---|---|---|
| Small apartment space application | Nested configuration reduces floor space for compact living areas and studio apartments | |
| Luxury modern interior application | Matches contemporary, glam, minimalist and light luxury interior design schemes | |
| Lounge waiting area application | Use in high-end residential lobbies, boutique hotel lounge areas for guest use | |
| Recommended seating pairings | Pairs with 3seat upholstered sofas, modular sectionals and fabric accent chairs | |
| Surface use recommendation | Supports table lamps, flower vases, coffee table books and snack serving trays without overhang |
欧洲市场准入与化学品要求
| EN 12521:2015 | Strength, durability and safety requirements for domestic tables | |
|---|---|---|
| EN 15185:2006 | Assessment of surface resistance to abrasion for furniture surfaces | |
| EN 15186:2006 | Assessment of surface resistance to scratching for furniture surfaces |
适用于中国市场项目的标准
| GB/T 3324-2017 | General technical requirements applicable to domestic wooden and stone-topped furniture | |
|---|---|---|
| GB 18584-2001 | Limit of harmful substances applicable to interior decoration wood furniture | |
| GB/T 4893.9-2013 | Surface abrasion resistance test method applicable to furniture finishes |
本产品须满足以下技术参数要求： 1. GB/T 3324-2017：General technical requirements applicable to domestic wooden and stone-topped furniture； 2. GB 18584-2001：Limit of harmful substances applicable to interior decoration wood furniture； 3. GB/T 4893.9-2013：Surface abrasion resistance test method applicable to furniture finishes； 最终交付参数、检测报告和验收标准以双方采购合同为准。
以下文件均根据当前已发布商品参数实时生成。
直接下载英文参数报告，可选择公制或英制单位。
导出全部商品信息与参数模块，文件内容统一使用英文。
包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。
生成申报品名、材质、用途、尺寸及海关申报要素。
打开导出工具
