纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	800 × 800 × 450 mm
Overall set assembled footprint (fully extended)	1200 x 800 mm
Tabletop thickness (both tables)	12 mm
Metal frame tube wall thickness	1.5 mm
Frame leg width (tubular section)	30 mm
Under-table floor clearance for large table	120 mm
Under-table floor clearance for small table	100 mm
Nesting overlap depth (small table under large)	400 mm
Table edge radius (rounded safety edge)	10 mm
Foot pad diameter	20 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Total set net weight	34 kg
Large table static distributed load capacity	60 kg
Surface stain resistance rating	Grade 5
Frame coating scratch resistance	2H pencil hardness
Recommended maximum static load for decorative items	10 kg per tabletop
Product service life reference	8 years
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Large table tabletop	Dark matte sintered stone, 12mm thick, sealed smooth surface
Small table tabletop	Light marble-pattern sintered stone, 12mm thick, polished smooth surface
Structural frame (both tables)	Welded iron tubing, 1.5mm wall thickness, matte black baked powder coat
Frame connection hardware	Zinc-plated steel bolts and lock nuts, M8 size
Floor contact pads	TPU rubber non-slip adjustable pads, 20mm diameter
Table edge finishing	Matching stone edge polishing, no exposed sharp substrate
Frame internal bracing	Cross-welded metal gussets at leg joints, 2mm thick steel
Surface finish coating thickness (frame)	60 micron
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Nesting space-saving function	Small table tucks up to 400mm beneath large table to reduce footprint
Floor leveling adjustment	Each foot pad adjusts 5mm vertically to compensate for uneven floors
Surface maintenance feature	Non-porous sintered stone top wipes clean with damp cloth, no sealing required
Frame anti-rust protection	Baked powder coat finish prevents rust formation in normal indoor humidity
Assembly structure	Knock-down flat pack design, frame attaches to tabletop with 8 bolts per table
Dual-height surface use	Two different table heights create multi-level display and serving space
Safety edge design	Fully rounded table edges eliminate sharp corner impact injury risk
Independent use capability	Each table can be used separately as a standalone side or accent table
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential living room use	Placed in front of sofas for serving drinks, displaying decor and holding reading materials
Small apartment / compact space use	Nesting function reduces footprint when extra surface is not required
Modern / contemporary interior design	Minimalist geometric frame and two-tone stone tops match modern decor schemes
Office reception lounge use	Can be used in office waiting areas to hold magazines and refreshments for guests
Flexible multi-function arrangement	Small table can be pulled out for extra serving space during gatherings
Family home child-safe environment	Rounded edges and stable frame reduce injury risk in households with young children

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Furniture - Strength, durability and safety for domestic seating tables, applicable to coffee table use
EN 1022:2018	Furniture - Seating - Determination of stability, applicable to side table stability requirements
EN 13722:2004	Furniture - Test methods for surface finishes, applicable to metal frame coating performance

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to stone-top furniture structural stability
GB/T 4897.3-2015	Particleboard for furniture use, applicable if any composite substrate is used below stone tops
GB 18584-2001	Indoor decorating and refurbishing materials - limit of harmful substances for furniture
GB/T 1732-1993	Paint film impact resistance test method, applicable to metal frame finish durability

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to stone-top furniture structural stability；
2. GB/T 4897.3-2015：Particleboard for furniture use, applicable if any composite substrate is used below stone tops；
3. GB 18584-2001：Indoor decorating and refurbishing materials - limit of harmful substances for furniture；
4. GB/T 1732-1993：Paint film impact resistance test method, applicable to metal frame finish durability；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · NCT-RD-8060-BKST

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · NCT-RD-8060-BKST

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · NCT-RD-8060-BKST打开导出工具

页面快速操作

发布采购询价

产品描述

The Two-Piece Round Nesting Coffee Table Set (model NCT-RD-8060-BKST) is an unbranded modern minimalist public and residential furniture piece defined by clean geometric lines and intentional visual contrast. The set features two circular tabletops with fully rounded, polished edges that eliminate sharp corners: the larger table has a dark matte sintered stone surface, while the smaller table has a light marble-pattern polished sintered stone top, both 12mm thick. The frame for both tables is constructed from matte black powder-coated welded iron tubing, with a tubular leg width of 30mm, 1.5mm tube walls, and cross-welded 2mm thick steel gussets at leg joints for structural stability. The frame’s 60-micron baked powder coating delivers 2H pencil hardness scratch resistance and rust prevention under normal indoor humidity levels, while zinc-plated M8 steel bolts and lock nuts secure all connections. Adjustable 20mm diameter TPU rubber non-slip foot pads sit at each leg base, offering 5mm of vertical adjustment to level the tables on uneven floors and prevent floor scratches. The large table measures 800mm in diameter and 450mm tall, with 120mm of under-table clearance, while the smaller table measures 600mm in diameter and 500mm tall, with 100mm of under-table clearance. When fully extended, the set occupies a 1200 x 800mm footprint; the smaller table tucks up to 400mm beneath the larger unit to save space when extra surface area is not needed, and pulls out to create dual-height serving and display space for gatherings. The non-porous sintered stone tops carry a Grade 5 stain resistance rating, wipe clean with a damp cloth, and require no ongoing sealing. The large table supports 60kg of static distributed load, the smaller table supports 10kg of static distributed load for decorative items, and the set has a total net weight of 34kg, with an 8-year reference service life. Delivered as a knock-down flat pack across 2 cartons with a total packaged weight of 90kg, the set requires 40 minutes of assembly per unit, with 8 bolts securing each tabletop to its frame. The design suits a range of spaces: residential living rooms placed in front of sofas for serving drinks, holding reading materials and displaying decor; compact small apartments where floor space is limited; modern contemporary interiors that align with its minimalist aesthetic; office reception lounges for holding magazines and guest refreshments; and family homes with young children, where rounded edges and a stable frame reduce injury risk. Procurement teams should note the 0.55m³ total packaging volume per set, load limits for tabletops, and the need for basic assembly on site, with no additional specialized tools required beyond standard hardware included in packaging.

Two-Piece Round Nesting Coffee Table Set with Contrasting Stone Tops and Black Geometric Metal Frame Specifications

供应商与现货