纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	900 × 900 × 350 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Tabletop static load capacity	50 kg
Set total net weight	42 kg
Recommended maximum user weight for edge sitting	100 kg
Surface abrasion resistance cycles	1000 cycles
Storage compartment internal volume	120 L
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test
Recommended Procurement Warranty	Structure 5 years; hardware 3 years; finish 2 years

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Large table light-toned top section	Matte lacquered MDF panel with fine texture finish
Large table dark-toned top section	Matte dark wood-grain engineered wood panel
Large table side panel/base	Matte lacquered MDF with black edge banding
Small table top outer ring	Clear tempered glass with polished edge
Small table central top insert	Woven natural rattan webbing panel
Small table support structure	Powder-coated black steel cylindrical pedestal with circular base
Internal storage base panel	18mm thick particleboard with laminated finish
Floor protection pads	5mm thick non-slip felt pads affixed to base bottom
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Concealed internal storage	Rotating/sliding top section reveals enclosed compartment for remote controls and magazines
Flexible nesting configuration	Small side table slides partially under large table edge to save floor space when not in use
Dual-height surface design	Large table at 350mm height for standard coffee use, small table at 450mm for side table access next to seating
Scratch-resistant matte top finish	Low-sheen surface resists daily scuffs from cups, books and decor items
Stable pedestal support for small table	Wide circular steel base eliminates tipping risk when placing heavy items on table edge
Non-marking floor contact	Felt base pads prevent scratches on hardwood, tile and low-pile carpet surfaces
Easy surface maintenance	Non-porous lacquer and glass surfaces wipe clean with soft damp cloth, no special cleaners required
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Modern living room seating areas	Pairs with 3-seat sofas in open-plan apartments or small homes for beverage and decor placement
Compact lounge spaces	Nesting configuration reduces footprint for studio apartments or small reception areas
Casual home office reception zones	Provides polished surface for meeting refreshments and reading materials in small client seating areas
Residential balcony lounge setups	Weather-resistant finish options work for covered outdoor lounge spaces paired with casual seating
Recommended decor pairing	Matches light wood, leather or fabric upholstered sofas in neutral color palettes

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12150-1:2015	Toughened soda lime silicate glass for building, applicable to small table glass top safety
EN 14749:2016	Domestic and kitchen storage furniture safety, applicable to enclosed storage compartment stability
EN 1730:2012	Domestic furniture tables test methods for strength and durability, applicable to structural load testing
Glass top impact resistance rating	EN 12150 residential tempered glass grade

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to finish adhesion and edge quality
GB 28007-2011	Safety requirements for children's furniture, applicable to rounded edge design for household use
GB/T 28202-2011	Glass furniture safety specification, applicable to tempered glass top strength requirements

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to finish adhesion and edge quality；
2. GB 28007-2011：Safety requirements for children's furniture, applicable to rounded edge design for household use；
3. GB/T 28202-2011：Glass furniture safety specification, applicable to tempered glass top strength requirements；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CT-RND-NEST-090

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CT-RND-NEST-090

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CT-RND-NEST-090打开导出工具

页面快速操作

发布采购询价

产品描述

The 2-Piece Round Nesting Coffee Table Set with Integrated Storage is a minimalist modern living room furniture solution defined by clean lines and a refined two-tone finish. The set consists of a larger primary coffee table and a smaller accent table, designed to operate both as independent surfaces and a space-saving nested unit; when floor space is limited, the smaller table slides partially beneath the edge of the larger table to reduce overall footprint. The larger table features a split top with a matte light-toned lacquered MDF section with fine textured finish, paired with a matte dark wood-grain engineered wood section, set on a matte lacquered MDF base with black edge banding. The smaller table has a clear polished-edge tempered glass outer ring surrounding a woven natural rattan central insert, supported by a powder-coated black steel cylindrical pedestal with a wide circular base. All load-bearing structures are built for consistent daily use: primary panels measure 25 mm thick, with 40 mm composite build-up for load-bearing top sections, paired with 80 mm main support sections with 2 mm metal wall thickness. The 120 L concealed internal storage is accessed via a rotating and sliding top section, sized to hold remote controls, magazines, and small living room essentials. The larger table stands at 350 mm height for standard coffee service, while the smaller table reaches 450 mm to function as a side table adjacent to seating, with 680 mm high and 900 mm wide effective knee clearance. The scratch-resistant matte top finish resists daily scuffs from cups, books, and decor, while non-porous lacquer and glass surfaces wipe clean with a soft damp cloth without special cleaning products. Non-slip 5 mm felt pads affixed to the base prevent scratches on hardwood, tile, and low-pile carpet. The larger tabletop supports 50 kg static load and 150 kg uniformly distributed weight, with a 100 kg recommended maximum weight for edge sitting; drawer slides support 45 kg per pair across 50000 operation cycles, and surfaces withstand 1000 abrasion cycles. An 80 mm diameter cable opening with 120 mm deep cable tray supports cord management for small electronics. The set is suitable for open-plan apartment living rooms paired with 3-seat light wood, leather, or neutral fabric sofas, compact studio lounge spaces, casual home office client reception zones, and covered residential balcony lounge areas. Procurement teams should note each set ships in 2 cartons with total packaged gross weight of 90 kg, requires 40 minutes of assembly time, and has a total net weight of 42 kg.

2-Piece Round Nesting Coffee Table Set with Integrated Storage Specifications

供应商与现货