纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	800 × 800 × 450 mm
overall nested set footprint	800 x 800 x 450 mm
large table diameter	800 mm
large table total height	450 mm
large table top thickness	12 mm
small table diameter	600 mm
small table total height	400 mm
small table top thickness	12 mm
base wall panel thickness	18 mm
floor clearance under base	2 mm
edge radius of table top	400 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

large table static distributed load capacity	100 kg
large table net weight	32 kg
sintered stone top scratch resistance grade	6 Mohs
wood base moisture content	10%
table edge impact resistance	10 J
recommended maximum supported user weight for temporary seating	80 kg
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles
Top Abrasion Reference	Acceptance target ≥4,000 abrasion cycles or finish-system test

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

large table top	12mm black sintered stone with polished gold linear veining
small table top	12mm black sintered stone with matching gold linear veining
large table drum base	18mm walnut wood veneer over MDF core, four curved scalloped panels
small table drum base	18mm walnut wood veneer over MDF core, four curved scalloped panels
top-to-base connection	Hidden steel dowel and adhesive joinery, flush no-overhang fit
base bottom finish	Felt floor protection pads applied to all base bottom edges
surface finish on wood base	Matte clear polyurethane lacquer, open wood grain texture
table top edge finish	Polished eased edge, zero overhang from base perimeter
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

space-saving nesting configuration	Small table slides fully under large table to reduce footprint when not in use
independent dual-table use	Both tables can be separated and used as standalone surfaces for drinks, decor or books
stable enclosed drum support	Four-panel cylindrical base eliminates tipping risk even when weight is placed on top edges
scratch and stain resistant top surface	Non-porous sintered stone top resists spills, heat from mugs and surface abrasion
floor protection design	Hidden felt pads under base edges prevent scratches to hard flooring and carpet
leveling stability	Uniform base bottom contour sits evenly on low-pile carpet and flat hard floors
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

residential living room	Placed in front of sofas or sectionals for beverage, decor and media accessory storage
small apartment lounge spaces	Nesting function saves floor space when extra surface area is not required
modern luxury interior schemes	Walnut wood and black veined stone finish complements contemporary, minimalist or Italian-inspired decor
open-plan lounge areas	Separated tables can be positioned adjacent to seating groups for flexible guest serving
lounge reception areas	Suitable for upscale office waiting areas or boutique lounge spaces for guest use
home media rooms	Low profile height does not obstruct view of screens placed behind the seating area

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Safety, strength and durability requirements for domestic living room tables
EN 13722:2004	Surface resistance to cold liquids for furniture finished surfaces
EN 312:2010	Particleboard performance requirements for structural wood-based panels

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to wood base construction
GB 6566-2010	Radionuclide limit requirements applicable to sintered stone top material
GB/T 4897.3-2015	Particleboard requirements applicable to MDF core structural panels

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to wood base construction；
2. GB 6566-2010：Radionuclide limit requirements applicable to sintered stone top material；
3. GB/T 4897.3-2015：Particleboard requirements applicable to MDF core structural panels；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · NCT-WAL-8060-BLKST

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · NCT-WAL-8060-BLKST

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · NCT-WAL-8060-BLKST打开导出工具

页面快速操作

发布采购询价

产品描述

This unbranded 2-piece nesting round coffee table set (model NCT-WAL-8060-BLKST) features a sleek modern luxury aesthetic defined by smooth cylindrical drum bases and contrasting refined surface finishes. Both tables in the set carry identical design language: the larger table measures 800mm in diameter with a 450mm total height, while the smaller table stands 400mm tall at 600mm diameter, sliding fully beneath the larger unit to achieve a compact nested footprint of 800 x 800 x 450 mm when extra surface space is not required. Each table’s 12mm thick top is polished black sintered stone marked with consistent gold linear veining, finished with a smooth eased edge that sits perfectly flush to the base perimeter with zero overhang. The cylindrical drum bases for both tables are constructed from four curved scalloped panels, with 18mm thick walnut wood veneer laid over an MDF core, coated in a matte clear polyurethane lacquer that preserves the open, natural grain texture of the walnut. Hidden steel dowels and strong adhesive create a rigid, flush connection between each top and its base, while soft felt pads fixed to all bottom edges of the bases protect hard flooring and carpet from scuffs. The non-porous sintered stone tops deliver scratch resistance rated to 6 Mohs, repelling spills, heat from warm drinkware, and regular surface abrasion, while the enclosed four-panel drum structure eliminates tipping risk even when weight is placed on the outer top edges. The larger table supports 100kg of static distributed load, with a total static load reference of 150kg when weight is evenly distributed; the unit can support up to 80kg for temporary seating use, and table edges resist impacts of up to 10J. A built-in cable management tray holds up to 10 power or data cables with a 10kg load capacity, and the uniform base contour sits level on both low-pile carpet and flat hard flooring. The set is suited for a wide range of spaces: residential living rooms positioned in front of sofas or sectionals to hold drinks, decor, and media accessories; small apartment lounges where the nesting function preserves valuable floor space; open-plan lounge areas where the two tables can be separated to serve separate seating groups; upscale office reception or boutique lounge waiting areas; and home media rooms, where the low profile does not block views of screens positioned behind seating. The walnut and black veined stone finish complements contemporary, minimalist, and Italian-inspired interior schemes. For procurement, note the set ships in two cartons with a total packaged gross weight of 90kg, requires 40 minutes of assembly per unit, and the wood bases maintain a 10% moisture content for consistent long-term performance in standard indoor environments.

2-Piece Nesting Round Coffee Table Set with Walnut Drum Base and Black Gold-Veined Sintered Stone Top Specifications

供应商与现货