纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1300 × 700 × 450 mm
Overall set footprint (oval table as primary)	1300 x 700 x 450 mm
Large oval tabletop thickness	12 mm
Small round table diameter	700 mm
Small round table height	450 mm
Oval table vertical leg tube section	30 x 30 mm
Oval table crossbar length	850 mm
Round table central pedestal diameter	60 mm
Round table splayed leg spread diameter at floor	600 mm
Under-table floor clearance	380 mm
Leg wall thickness (steel tubing)	2.0 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Oval table static distributed load capacity	50 kg
Total set net weight	50 kg
Sintered stone top Mohs scratch hardness	7
Gold finish salt spray resistance (indoor use)	72 hours
Recommended maximum seated users served	4
Structural frame warranty	3 years
Available frame/top color variants	4
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Large oval tabletop	12mm matte grey sintered stone, scratch-resistant non-porous surface
Small round tabletop	12mm matte grey sintered stone, matching veined finish to oval table
Oval table support frame	2.0mm thick carbon steel, brushed baked gold paint finish
Round table central pedestal	60mm diameter carbon steel tube, brushed gold finish matching oval frame
Round table splayed legs	15mm diameter solid steel rods, brushed gold finish, welded to central pedestal
Foot pads	Adjustable injection-molded plastic levelers at each leg base
Frame connection hardware	M8 zinc-plated steel bolts securing tops to frames
Stone top edge finish	Hand-polished eased edge, 1mm radius to prevent chipping
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Nesting configuration	Round table slides partially under oval table to save floor space when not in use
Leveling adjustment	Rotating plastic foot pads adjust 10mm vertically to compensate for uneven flooring
Surface utility	Non-porous stone tops support beverage service, book display, and decorative objects without water staining
Fixed structural assembly	Welded frame joints with bolted top connections, no folding, lifting, or rotating mechanisms
Cleaning access	380mm floor clearance allows robot vacuums and manual cleaning tools to pass under tables
Dual table use case	Oval table serves main seating area, round table works as side accent or extra surface for guests
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential living rooms	Placed in front of 4seater sofas for beverage, decor, and reading material display
Apartment lounge areas	Nesting design saves space in compact urban living areas with limited floor space
Light luxury/modern minimalist interiors	Gold metal and grey stone finish complements neutral upholstery and contemporary decor
Hotel lobby lounge areas	Durable stone surface and premium finish suit high-traffic public seating waiting zones
Show home staging	Coordinated set provides styled, uncluttered presentation for residential property display

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 15372:2016	Furniture - Strength, durability and safety for domestic tables, structural performance reference
EN 13722:2004	Furniture - Test methods for surface resistance to cold liquids, for stone top stain resistance
EN 1022:2018	Domestic furniture - Seating, provides sofa height reference for table height alignment

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to dimensional and structural acceptance
GB/T 4897.3-2015	Particleboard for furniture use, applies if backing/substrate is integrated under stone tops
GB 18584-2001	Indoor decorating and refurbishing materials - limit of harmful substances for wooden furniture
GB/T 1732-2020	Paint film impact resistance test, applicable to gold metal finish durability

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to dimensional and structural acceptance；
2. GB/T 4897.3-2015：Particleboard for furniture use, applies if backing/substrate is integrated under stone tops；
3. GB 18584-2001：Indoor decorating and refurbishing materials - limit of harmful substances for wooden furniture；
4. GB/T 1732-2020：Paint film impact resistance test, applicable to gold metal finish durability；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CT-OVRND-STN-GLD-2PC

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CT-OVRND-STN-GLD-2PC

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CT-OVRND-STN-GLD-2PC打开导出工具

页面快速操作

发布采购询价

产品描述

This 2-Piece Nesting Coffee Table Set, model CT-OVRND-STN-GLD-2PC from an unbranded line, delivers a modern light luxury aesthetic anchored by a coordinated two-table layout. The set uses the oval table as its primary piece, with a matching smaller round table designed to slide partially under the oval frame to reduce occupied floor space when not in active use. Both tabletops are crafted from 12mm matte grey sintered stone with a consistent veined finish, finished with hand-polished eased edges with a 1mm radius to prevent chipping. The non-porous, scratch-resistant stone surface has a Mohs scratch hardness rating of 7, and repels water staining to support everyday beverage service, book display, and decorative object placement. Support structures are built from carbon steel with a brushed baked gold paint finish: the oval table uses a 2.0mm thick tubular frame with 30 x 30 mm vertical leg sections and an 850mm crossbar, secured to the stone top with M8 zinc-plated steel bolts, while the round table uses a 60mm diameter central pedestal welded to 15mm diameter solid steel splayed legs that spread 600mm across at floor level. Each leg base is fitted with adjustable injection-molded plastic levelers that offer 10mm of vertical adjustment to compensate for uneven flooring, and the 380mm floor clearance under both tables allows robot vacuums and manual cleaning tools to pass easily for unobstructed maintenance. Welded frame joints and bolted top connections create a fixed, stable structure with no folding, lifting, or rotating mechanisms; the oval table supports a static distributed load of 50 kg, and the set is sized to serve up to four seated users. The total net weight of the set is 50 kg, and the gold finish offers 72 hours of salt spray resistance for reliable indoor use, backed by a 3-year structural frame warranty. Four frame and top color variants are available for selection. The set is well suited for residential living rooms positioned in front of four-seater sofas, compact apartment lounge areas where the nesting design supports efficient space use, light luxury or modern minimalist interiors where the grey stone and brushed gold pairing complements neutral upholstery and contemporary decor, high-traffic hotel lobby lounge waiting zones, and show home staging to create a coordinated, uncluttered visual presentation. For procurement, note the set ships in two cartons per unit, with a total packaged gross weight of 90 kg, a packaging volume of 0.55 m³, and a reference assembly time of 40 minutes per set.

2-Piece Nesting Coffee Table Set, Grey Stone Top with Brushed Gold Metal Base Specifications

供应商与现货