纠错时间

修改字段

原参数

修改后参数

说明 / 状态

暂无参数纠错记录，发现错误可点击行末旗标提交

PRODUCT MODULE 01 / 06

基础物理尺寸

mm / 英寸自动双单位换算 · 工程采购基础规格

数据来源：工厂资料结构化字段，最终以实测值为准

产品外部尺寸（宽 × 深 × 高）	1200 × 600 × 450 mm
Overall assembled dimensions	1200 x 600 x 450 mm
Tabletop thickness	16 mm
Leg cross-section dimension at mounting point	20 mm
Corner radius	50 mm
Front leg clearance span	1100 mm
Side leg clearance span	500 mm
Under-table ground clearance	434 mm
Leg taper diameter at floor contact	15 mm
Mounting plate diameter at leg-top joint	30 mm
Finished Top Thickness	45 mm
Effective Knee Clearance	680 mm high and 900 mm wide per main seat
Leg / Support Section	80 mm main section with 2 mm metal wall
Cable Opening Size	80 mm diameter; cable tray depth 120 mm

PRODUCT MODULE 02 / 06

重量、承重与性能参数

净重 / 最大承重 / 适用人数 / 耐久性能

数据来源：产品性能数据，采购前请核对具体测试口径

Distributed static tabletop load capacity	45 kg
Product net weight	12 kg
Surface vertical impact resistance	10 J
Surface abrasion resistance	2000 cycles
Powder coating rust resistance (indoor use)	100 hours salt spray
Leveling adjustment range	5 mm
Recommended maximum user weight for edge sitting	80 kg
Top Static Load Reference	150 kg uniformly distributed
Drawer Slide Load / Life	45 kg/pair; 50000 cycles
Hinge Opening Life	Acceptance target 80000 cycles

PRODUCT MODULE 03 / 06

材质与结构参数

工程采购验收核心字段 · 面板基材 / 五金 / 框架 / 面料

数据来源：以工厂材质清单与验货报告为准

Tabletop substrate	16 mm thick MDF board
Tabletop surface finish	White marble-pattern melamine laminate
Tabletop edge treatment	Matching laminate sealed edge with rounded profile
Leg construction	Powder-coated matte black carbon steel tubing
Leg mounting hardware	Zinc-plated steel screw fasteners with black plastic end caps
Foot glides	Black nylon non-slip leveling glides
Surface coating layer thickness	0.1 mm melamine wear layer
Primary Panel Thickness	25 mm; load-bearing top may use 40 mm composite build-up
Edge Band Thickness	2 mm
Metal Frame Wall Thickness	2 mm cold-rolled steel
Primary Connector Specification	Reference M6-M8 with at least 2 fixing points per main support
Reference Finish / Color Count	Recommended 6top finishes and 3frame colors

PRODUCT MODULE 04 / 06

功能与调节参数

升降 / 旋转 / 倾仰 / 锁定 / 移动 / 储物功能

数据来源：功能配置参数，以供应商正式规格为准

Structure type	Fixed four-corner leg open frame design
Assembly requirement	Flat-pack leg attachment to pre-finished tabletop
Surface function	Smooth non-porous easy-clean top for drinks, decor and reading material
Safety feature	Rounded anti-collision table corners
Floor protection	Non-marking nylon glides prevent scratches on carpet and hard flooring
Leveling function	Adjustable foot glides compensate for slight uneven floor surfaces
Disassembly for transport	Legs are fully detachable from tabletop for flat storage and moving
Cable Management Capacity	Reference capacity 10power/data cables; tray load 10 kg
Reference Reassembly Count	Main joints should support 5controlled assembly cycles

PRODUCT MODULE 05 / 06

包装与物流参数

经核验的外箱 / 毛重 / 组装 / 装柜数据

数据来源：外贸报价与装柜测算参考

Single carton outer dimensions	1250 x 680 x 180 mm
Reference Package Count	1 set / 2 cartons
Reference Assembly Time	40 minutes per set
Reference Package Dimensions	2100× 1100× 300 mm
Reference Packaged Gross Weight	90 kg/set in 2 cartons
Reference Packaging Volume	0.55 m³/set

PRODUCT MODULE 06 / 06

应用场景与使用方式

推荐空间 / 目标用户 / 使用方式

数据来源：依据产品结构与品类整理的推荐应用场景

Residential living room placement	Position in front of sofas for holding drinks, remotes, books and decorative items
Small apartment and studio use	Compact open-frame design maintains visual lightness in limited floor space
Office reception lounge application	Use in waiting areas for guest refreshments and reading materials
Modern minimalist interior compatibility	Coordinates with monochrome, Scandinavian and contemporary decor schemes
Low-traffic casual space use	Suitable for bedrooms, walk-in closets or home lounge nooks
Recommended cleaning method	Wipe surface with damp soft cloth and mild detergent, avoid abrasive scouring pads

STANDARD S1

欧盟市场准入要求 * EN 标准

欧洲市场准入与化学品要求

EN 12521:2015	Furniture strength, durability and safety for domestic tables, applicable to structural performance
EN 15187:2007	Furniture assessment of surface resistance to cold liquids, applicable to top finish testing
EN 1022:2019	Domestic furniture seating stability reference for occasional table edge load validation

STANDARD S3

适用于中国市场项目的标准 * GB 标准

适用于中国市场项目的标准

GB/T 3324-2017	General technical requirements for wooden furniture, applicable to tabletop substrate performance
GB/T 4893.8-2013	Surface wear resistance test method for furniture surfaces, applicable to laminate top verification
GB/T 4893.1-2021	Surface resistance to cold liquids test method, applicable to water/stain resistance checks
GB 6675.2-2014	Toy safety mechanical requirements reference for rounded corner edge safety validation

招标文件标准化描述文本

本产品须满足以下技术参数要求：
1. GB/T 3324-2017：General technical requirements for wooden furniture, applicable to tabletop substrate performance；
2. GB/T 4893.8-2013：Surface wear resistance test method for furniture surfaces, applicable to laminate top verification；
3. GB/T 4893.1-2021：Surface resistance to cold liquids test method, applicable to water/stain resistance checks；
4. GB 6675.2-2014：Toy safety mechanical requirements reference for rounded corner edge safety validation；
最终交付参数、检测报告和验收标准以双方采购合同为准。

GENERATED EXPORTS

一键导出完整商品资料

以下文件均根据当前已发布商品参数实时生成。

完整参数报告 PDF

直接下载英文参数报告，可选择公制或英制单位。

PDF · CT-FM12060-BK

完整参数 Excel

导出全部商品信息与参数模块，文件内容统一使用英文。

XLSX · CT-FM12060-BK

外贸 Listing 模板

包含英文标题、规格、材质、标准和采购字段，可用于国际平台刊登。

XLSX · LISTING

海关申报数据

生成申报品名、材质、用途、尺寸及海关申报要素。

CUSTOMS · CT-FM12060-BK打开导出工具

页面快速操作

发布采购询价

产品描述

The Minimalist Rectangular Rounded-Corner Faux Marble Coffee Table (model CT-FM12060-BK) is an unbranded public and residential furniture piece designed to balance understated visual appeal with everyday utility, built for low-traffic casual environments. Its clean, open silhouette features a rectangular white marble-patterned tabletop with 50mm rounded corners, supported by a fixed four-corner open frame of matte black metal legs, creating a lightweight visual presence that avoids visual clutter even in compact layouts. The clear, unobstructed leg spans maintain open sightlines, complementing modern minimalist, monochrome, Scandinavian, and contemporary interior schemes without overwhelming surrounding decor. The tabletop is constructed from a 16mm MDF substrate, finished with a 0.1mm melamine wear layer printed in a white marble pattern, sealed with 2mm matching laminate rounded edge trim to align with its soft corner profile. Legs are formed from powder-coated matte black carbon steel tubing, secured to the tabletop with zinc-plated steel screw fasteners capped with black plastic covers, and fitted at the base with black nylon non-slip leveling glides. The assembled table measures 1200mm wide, 600mm deep, and 450mm tall, with 434mm under-table clearance, 1100mm front leg span, and 500mm side leg span. Practical design features address everyday use needs: the smooth, non-porous tabletop is easy to wipe clean for holding drinks, decor, reading materials, and small personal items, while rounded anti-collision corners reduce bump-related injury risks. Adjustable glides offer 5mm of leveling adjustment to compensate for slightly uneven floors, and the non-marking nylon feet prevent scratches on both carpet and hard flooring surfaces. The table supports 45kg of distributed static load on its top, 10J of vertical surface impact, 2000 abrasion cycles, and a maximum 80kg weight for edge sitting; its matte black powder coating withstands 100 hours of salt spray for indoor rust resistance. The piece ships as flat-pack components requiring 40 minutes of assembly to attach legs to the pre-finished tabletop, and legs detach fully for flat storage or easy transport. It is well suited for placement in front of residential living room sofas, small apartment studios, office reception waiting areas, bedroom lounge nooks, and walk-in closet seating zones. Procurement teams should note the product is delivered across 2 cartons per set, with a total packaged gross weight of 90kg and 0.55 cubic meter packaging volume, and that regular care requires wiping with a soft damp cloth and mild detergent, with abrasive scouring pads prohibited to preserve the surface finish.

Minimalist Rectangular Rounded-Corner Faux Marble Coffee Table with Black Metal Legs Specifications

供应商与现货